Difference between revisions of "Template:H5SoftwareFeature-FriendlyCore"

From FriendlyELEC WiKi
Jump to: navigation, search
Line 17: Line 17:
 
|rowspan="1"| Linux-4.14
 
|rowspan="1"| Linux-4.14
 
|
 
|
*支持LED,通过/sys/class/leds访问。
+
*It supports LED. You can access it via "/sys/class/leds".
*支持GPIO,通过/sys/class/gpio/访问。
+
*It supports GPIO. You can access it via "/sys/class/gpio/".
*支持UART0/1/2/3,通过/dev/ttySX访问。
+
*It supports UART0/1/2/3. You can access it via "/dev/ttySX".
 
{{#switch: {{{1}}}
 
{{#switch: {{{1}}}
 
  | NanoPi-K1-Plus|NanoPi-NEO-Core2 =
 
  | NanoPi-K1-Plus|NanoPi-NEO-Core2 =
*支持I2C0/1/2,通过/dev/i2c-X访问。
+
*It supports I2C0/1/2. You can access it via "/dev/i2c-X".
 
  | NanoPi-NEO2|NanoPi-NEO-Plus2 =
 
  | NanoPi-NEO2|NanoPi-NEO-Plus2 =
*支持I2C0,通过/dev/i2c-X访问。
+
*It supports I2C0. You can access it via "/dev/i2c-X".
 
}}
 
}}
 
{{#switch: {{{1}}}
 
{{#switch: {{{1}}}
 
  | NanoPi-K1-Plus|NanoPi-NEO-Core2 =
 
  | NanoPi-K1-Plus|NanoPi-NEO-Core2 =
*支持SPI0/1,通过/dev/spidevX.X访问,SPI1与UART3引脚复用。
+
*It supports SPI0/1. You can access it via "/dev/spidevX.X". The SPI1 and UART3 pins are multiplexed.
 
  | NanoPi-NEO2|NanoPi-NEO2-Plus2 =
 
  | NanoPi-NEO2|NanoPi-NEO2-Plus2 =
*支持SPI0,通过/dev/spidevX.X访问。
+
*It supports SPI0. You can access it via "/dev/spidevX.X".
 
}}
 
}}
*支持PWM0,通过/sys/class/pwm/访问,与UART0引脚复用。
+
*It supports PWM0. You can access it via "/sys/class/pwm/". The UART0 pin is multiplexed.
*支持I2S0,默认配合PCM5102A codec使用,与I2C1引脚复用。
+
*It supports I2S0. It works together with PCM5102A codec. The I2C1 pin is multiplexed.
*支持Watchdog,通过/dev/watchX访问。
+
*It supports Watchdog. You can access it via "/dev/watchX".
*支持读取CPU ID,通过/sys/bus/nvmem/devices/sunxi-sid0/nvmem访问。
+
*It can read a CPU ID. You can access it via "/sys/bus/nvmem/devices/sunxi-sid0/nvmem".
 
{{#switch: {{{1}}}
 
{{#switch: {{{1}}}
 
  | NanoPi-K1-Plus =
 
  | NanoPi-K1-Plus =
*支持IR Receive
+
*It supports IR Receiver
 
  | #default =  
 
  | #default =  
*支持IR Receive,需自行外接IR接收器。
+
*It supports IR Receiver. You need to connect an IR receiver to the board.
 
}}
 
}}
 
{{#switch: {{{1}}}
 
{{#switch: {{{1}}}
 
  | NanoPi-K1-Plus =
 
  | NanoPi-K1-Plus =
*支持WiFi模块RTL8189。
+
*It supports WiFi RTL8189.
*支持HDMI音视频输出。
+
*It supports HDMI audio output.
 
}}
 
}}
*支持CPU动态电压调节。
+
*It supports dynamic CPU voltage regulation.
 
{{#switch: {{{1}}}
 
{{#switch: {{{1}}}
 
  | NanoPi-K1-Plus|NanoPi-NEO-Core2|NanoPi-NEO2 =
 
  | NanoPi-K1-Plus|NanoPi-NEO-Core2|NanoPi-NEO2 =
*支持Micro USB OTG。
+
*It supports Micro USB OTG.
 
}}
 
}}
 
{{#switch: {{{1}}}
 
{{#switch: {{{1}}}
 
  | NanoPi-K1-Plus|NanoPi-NEO-Core2|NanoPi-NEO2 =
 
  | NanoPi-K1-Plus|NanoPi-NEO-Core2|NanoPi-NEO2 =
*支持USB Host1/2/3。
+
*It supports USB Host1/2/3.
 
  | NanoPi-NEO-Plus2 =
 
  | NanoPi-NEO-Plus2 =
*支持USB Host0/1/2/3。
+
*It supports USB Host0/1/2/3.
 
}}
 
}}
*支持TF Card。
+
*It supports TF Card.
 
{{#switch: {{{1}}}
 
{{#switch: {{{1}}}
 
  | NanoPi-K1-Plus|NanoPi-NEO-Core2|NanoPi-NEO-Plus2 =
 
  | NanoPi-K1-Plus|NanoPi-NEO-Core2|NanoPi-NEO-Plus2 =
*支持eMMC。
+
*It supports eMMC.
 
}}
 
}}
*支持1000M Ethernet。
+
*It supports 1000M Ethernet.
*支持H5自带Codec,录音与播放。
+
*It supports H5's internal Codec and supports voice playing and recording.
 
{{#switch: {{{1}}}
 
{{#switch: {{{1}}}
 
  | NanoPi-K1-Plus =  
 
  | NanoPi-K1-Plus =  
*支持DVP Camera(CAM500B)
+
*It supports DVP Camera(CAM500B).
 
}}
 
}}
 
*支持USB Camera(CAM202)。
 
*支持USB Camera(CAM202)。

Revision as of 09:41, 30 July 2018

FriendlyCore System
Cross-Compiler
  • gcc-linaro-6.3.1-2017.02-x86_64_aarch64-linux-gnu
  • it applies to 64-bit Armv8 Cortex-A, little-endian architechture. FriendlyElec uses it for its H5 based boards.
U-boot-2017.11
  • It can recognize a FriendlyElec's H5 based board and load its dtb file accordingly.
  • It optimizes memory settings.
  • It supports voltage regulation IC sy8106a and applies only to NanoPi K1 Plus/NanoPi NEO Core2.
  • It supports MAC generation from H5's CPU ID.
  • It supports system booting from either SD card or eMMC and can automatically load the kernel from the booting device.
Linux-4.14
  • It supports LED. You can access it via "/sys/class/leds".
  • It supports GPIO. You can access it via "/sys/class/gpio/".
  • It supports UART0/1/2/3. You can access it via "/dev/ttySX".


  • It supports PWM0. You can access it via "/sys/class/pwm/". The UART0 pin is multiplexed.
  • It supports I2S0. It works together with PCM5102A codec. The I2C1 pin is multiplexed.
  • It supports Watchdog. You can access it via "/dev/watchX".
  • It can read a CPU ID. You can access it via "/sys/bus/nvmem/devices/sunxi-sid0/nvmem".
  • It supports IR Receiver. You need to connect an IR receiver to the board.
  • It supports dynamic CPU voltage regulation.


  • It supports TF Card.
  • It supports 1000M Ethernet.
  • It supports H5's internal Codec and supports voice playing and recording.
  • 支持USB Camera(CAM202)。
  • 支持市面上常见USB WiFi Adapter。
  • 支持市面上常见USB Ethernet Adapter。
  • 支持市面上常见USB Serial Converter。
  • 支持市面上常见USB Sound Card。


文件系统
  • 基于UbuntuCore-16.04构建,保留UbuntuCore的原始特性。
  • 内置常用软件包: VIM/Nano/SSHserver等。
  • 内置Qt-Embedded-4.8,适合企业用户快速开发需要图形界面的产品。
  • 内置网络管理工具NetworkManager,自动检测和连接网络,便于管理网络,参考 NetworkManager
  • 内置命令行配置工具npi-config,可用于配置用户密码、系统语言、时区、Hostname、SSH开关、自动登录选项、硬件接口,参考Npi-config
  • 支持首次启动时自动扩展文件系统。
  • 支持启动时自动修复文件系统。
  • 启动512MB的swap分区。
  • 支持WiringNP,通过类似Arduino的API访问NanoPi的gpio/i2c/spi等,参考 [WiringNP
  • 支持BakeBit,BakeBit是一套传感器连接的解决方案,包括硬件(NanoHat Hub扩展板)和软件(BakeBit),参考BakeBit
  • 支持RPi.GPIO,通过Python访问NanoPi的gpio,参考 RPi.GPIO