Difference between revisions of "Matrix - Water Sensor"

From FriendlyELEC WiKi
Jump to: navigation, search
(硬件连接)
(Basic Device Operation)
 
(8 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
[[Matrix - Water Sensor/zh|查看中文]]
 
[[Matrix - Water Sensor/zh|查看中文]]
  
==介绍==
+
==Introduction==
[[File:Water Sensor.jpg|thumb|水位检测模块]]
+
[[File:Water Sensor.jpg|thumb|Water Sensor]]
* 模块Matrix-Water_Sensor是一个简易、性价比较高的水位/水滴识别检测传感器模块,适用于对液位高度的检测,可轻松完成水量到模拟信号的转换。
+
* The Matrix-Water_Sensor is a simple sensor module. It can be used to detect a water level and convert the amount of water to analog signals.
* 灵敏度可通过电位器调节。
+
* Its sensitivity can be adjusted via a potentiometer.
  
==特性==
+
==Features==
* 使用标准的3 PIN接口
+
* Standard 3 Pin interface
* 尺寸为 16x60mm
+
* PCB dimension(mm): 16 x 60
* PCB尺寸(mm):16x60
+
 
[[File:Soil_Moisture_Sensor.png | frameless|350px|Water Sensor.PCB]]
 
[[File:Soil_Moisture_Sensor.png | frameless|350px|Water Sensor.PCB]]
  
Line 24: Line 23:
 
|}
 
|}
  
==工作原理==
+
==Basic Device Operation==
* 模块通过一系列暴露的平行导线线迹,利用线迹电极间的电阻与液位高度成比例,测量水量大小从而判断水位。
+
* The module has a series of exposed traces. The resistance of these exposed traces are proportional to the water level. This mechanism is used to measure the amount of water and therefore calculate the water level. It can be used to detect whether or not there is rainfall as well.
利用线迹电极间的电阻与雨滴量成比例,测量是否下雨。
+
  
 
==Applications==
 
==Applications==
Line 32: Line 30:
 
For more details about the Matrix-Analog_to_Digital_Converter module refer to wiki:[[Matrix_-_Analog_to_Digital_Converter]]。<br>
 
For more details about the Matrix-Analog_to_Digital_Converter module refer to wiki:[[Matrix_-_Analog_to_Digital_Converter]]。<br>
  
===连接NanoPi M1===
+
===Connect to NanoPi M1===
参考下图连接模块:<br>
+
Refer to the following connection diagram to connect the module to the NanoPi M1:<br>
 
[[File:Matrix-Water_Sensor_nanopi_m1.jpg|frameless|600px|Matrix-Water_Sensor_nanopi_m1]]
 
[[File:Matrix-Water_Sensor_nanopi_m1.jpg|frameless|600px|Matrix-Water_Sensor_nanopi_m1]]
  
连接说明:
+
Connection Details:
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
Line 48: Line 46:
 
|}
 
|}
  
===连接NanoPi 2===
+
===Connect to NanoPi 2===
参考下图连接模块:<br>
+
Refer to the following connection diagram to connect the module to the NanoPi 2:<br>
 
[[File:Matrix-Water_Sensor_nanopi_2.jpg|frameless|600px|Matrix-Water_Sensor_nanopi_2]]
 
[[File:Matrix-Water_Sensor_nanopi_2.jpg|frameless|600px|Matrix-Water_Sensor_nanopi_2]]
  
连接说明:
+
Connection Details:
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
Line 64: Line 62:
 
|}
 
|}
  
===连接NanoPi M2 / NanoPi 2 Fire===
+
===Connect to NanoPi M2 / NanoPi 2 Fire===
NanoPi M2和NanoPi 2 Fire的40 Pin引脚定义是一模一样的,所以它们操作Matrix配件的步骤是一样的,这里仅以NanoPi M2为例。<br>
+
Refer to the following connection diagram to connect the module to the NanoPi M2/ NanoPi 2 Fire:<br>
参考下图连接模块:<br>
+
 
[[File:Matrix-Water_Sensor_nanopi_m2.jpg|frameless|600px|Matrix-Water_Sensor_nanopi_m2]]
 
[[File:Matrix-Water_Sensor_nanopi_m2.jpg|frameless|600px|Matrix-Water_Sensor_nanopi_m2]]
  
连接说明:
+
Connection Details:
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
Line 81: Line 78:
 
|}
 
|}
  
===连接NanoPC-T2===
+
===Connect to NanoPC-T2===
参考下图连接模块:<br>
+
Refer to the following connection diagram to connect the module to the NanoPC-T2:<br>
 
[[File:Matrix-Water_Sensor_NanoPC-T2.jpg|frameless|600px|Matrix-Water_Sensor_NanoPC-T2]]
 
[[File:Matrix-Water_Sensor_NanoPC-T2.jpg|frameless|600px|Matrix-Water_Sensor_NanoPC-T2]]
  
连接说明:
+
Connection Details:
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
Line 97: Line 94:
 
|}
 
|}
  
==编译运行测试程序==
+
==Compile & Run Test Program==
启动开发板并运行Debian系统,进入系统后克隆Matrix代码仓库:
+
Boot your ARM board with Debian and copy the matrix code:
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
 
$ apt-get update && apt-get install git
 
$ apt-get update && apt-get install git
 
$ git clone https://github.com/friendlyarm/matrix.git
 
$ git clone https://github.com/friendlyarm/matrix.git
 
</syntaxhighlight>
 
</syntaxhighlight>
克隆完成后会得到一个名为matrix的目录。
+
If your cloning is done successfully a "matrix" directory will be generated.
  
编译并安装Matrix:
+
Compile and install Matrix:
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
 
$ cd matrix
 
$ cd matrix
Line 111: Line 108:
 
</syntaxhighlight>
 
</syntaxhighlight>
  
运行测试程序:
+
Run test program:
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
 
$ matrix-adc
 
$ matrix-adc
 
</syntaxhighlight>
 
</syntaxhighlight>
注意:此模块并不支持热插拔,启动系统前需要确保硬件连接正确。<br>
+
Note: this module is not plug and play therefore before running the module please make sure it is connected to an ARM board.<br>
运行效果如下:<br>
+
Here is what you should observe:<br>
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
 
The channel0 value is 2460
 
The channel0 value is 2460
 
</syntaxhighlight>
 
</syntaxhighlight>
  
==代码说明==
+
==Code Sample==
所有的开发板都共用一套Matrix代码,本模块的测试示例代码为matrix-analog_to_digital_converter,内容如下:
+
This Matrix code sample can work with all the ARM boards mentioned in this module's wiki. The name of this code sample is "matrix-analog_to_digital_converter". Here is its source code:
 
<syntaxhighlight lang="c">
 
<syntaxhighlight lang="c">
 
int main(int argc, char ** argv)
 
int main(int argc, char ** argv)
Line 151: Line 148:
 
}
 
}
 
</syntaxhighlight>
 
</syntaxhighlight>
API说明参考维基:[[Matrix API reference manual/zh|Matrix API reference manual]] <br>
+
For more details about this APIs called in this code sample refer to [[Matrix API reference manual]] <br>
  
==相关资料==
+
==Resources==
 +
 
 +
==Update Log==
 +
===June-28-2016===
 +
* Created English wiki

Latest revision as of 02:33, 8 August 2016

查看中文

1 Introduction

Water Sensor
  • The Matrix-Water_Sensor is a simple sensor module. It can be used to detect a water level and convert the amount of water to analog signals.
  • Its sensitivity can be adjusted via a potentiometer.

2 Features

  • Standard 3 Pin interface
  • PCB dimension(mm): 16 x 60

Water Sensor.PCB

  • Pin Description
Pin Description
S GPIO
V Supply Voltage 5V
G Ground

3 Basic Device Operation

  • The module has a series of exposed traces. The resistance of these exposed traces are proportional to the water level. This mechanism is used to measure the amount of water and therefore calculate the water level. It can be used to detect whether or not there is rainfall as well.

4 Applications

The Matrix-Water_Sensor module outputs analog signals which can be converted to digital signals through an ADC converter e.g. the Matrix-Analog_to_Digital_Converter module.
For more details about the Matrix-Analog_to_Digital_Converter module refer to wiki:Matrix_-_Analog_to_Digital_Converter

4.1 Connect to NanoPi M1

Refer to the following connection diagram to connect the module to the NanoPi M1:
Matrix-Water_Sensor_nanopi_m1

Connection Details:

Matrix-Water_Sensor
GND NanoPi M1 Pin9
5V NanoPi M1 Pin2
S Matrix-Analog_to_Digital_Converter A0

4.2 Connect to NanoPi 2

Refer to the following connection diagram to connect the module to the NanoPi 2:
Matrix-Water_Sensor_nanopi_2

Connection Details:

Matrix-Water_Sensor
GND NanoPi 2 Pin9
5V NanoPi 2 Pin2
S Matrix-Analog_to_Digital_Converter A0

4.3 Connect to NanoPi M2 / NanoPi 2 Fire

Refer to the following connection diagram to connect the module to the NanoPi M2/ NanoPi 2 Fire:
Matrix-Water_Sensor_nanopi_m2

Connection Details:

Matrix-Water_Sensor
GND NanoPi M2 Pin9
5V NanoPi M2 Pin2
S Matrix-Analog_to_Digital_Converter A0

4.4 Connect to NanoPC-T2

Refer to the following connection diagram to connect the module to the NanoPC-T2:
Matrix-Water_Sensor_NanoPC-T2

Connection Details:

Matrix-Potentiometer
GND NanoPC-T2 USB Host GND
5V NanoPC-T2 USB Host 5V
S Matrix-Analog_to_Digital_Converter A0

5 Compile & Run Test Program

Boot your ARM board with Debian and copy the matrix code:

$ apt-get update && apt-get install git
$ git clone https://github.com/friendlyarm/matrix.git

If your cloning is done successfully a "matrix" directory will be generated.

Compile and install Matrix:

$ cd matrix
$ make && make install

Run test program:

$ matrix-adc

Note: this module is not plug and play therefore before running the module please make sure it is connected to an ARM board.
Here is what you should observe:

The channel0 value is 2460

6 Code Sample

This Matrix code sample can work with all the ARM boards mentioned in this module's wiki. The name of this code sample is "matrix-analog_to_digital_converter". Here is its source code:

int main(int argc, char ** argv)
{
    int i = 0;
    int value = 0;
    int channel = 0;
 
    if (boardInit() < 0) {
        printf("Fail to init board\n");
        return -1;
    }
 
    if (argc == 2)
        channel = atoi(argv[1]);
    system("modprobe "DRIVER_MODULE);
    signal(SIGINT, intHandler);
    for (i=0; i<ADC_READ_TIMES; i++) {
        if (pcf8591Read(channel, &value) != -1) {
            printf("The channel%d value is %d\n", channel, value);
        } else {
            printf("Fail to get channel%d value\n", channel);
        }
    }
    system("rmmod "DRIVER_MODULE);
 
    return 0;
}

For more details about this APIs called in this code sample refer to Matrix API reference manual

7 Resources

8 Update Log

8.1 June-28-2016

  • Created English wiki