BakeBit - Red LED

From FriendlyELEC WiKi
Revision as of 16:15, 14 December 2016 by Yftan (Talk | contribs) (特性)

Jump to: navigation, search

查看中文

1 Introduction

Red LED
  • The BakeBit - Red LED is an LED module. This module has a a triode which is used to turn the LED on or off. There is a potentiometer in series connection with the LED. When users adjust the potentiometer the LED's luminance will be changed accordingly.Or you input PWM signals to control the the LED's luminance.

2 Hardware Spec

  • Standard 2.0mm pitch 4-Pin BakeBit Interface
  • LED's luminance adjustable
  • Digital Input
  • LED Color: Red

BakeBit - Red LED


  • Pin Description:
Pin Description
GND Ground
5V 5V Supply Voltage
NC Not Connected
SIG Signal

3 示例程序:LED Blink

BakeBit_-_Green_LED使用同一个示例源代码,可参考BakeBit_-_Green_LED的网页。

4 相关资料