Template:BurnAndroidToEMMC-Allwinner

Boot from eMMC

• Extract an Android image and the USB flashing utility "LiveSuitV306_For_Linux64.zip" under Ubuntu and install LiveSuit by running the following command:

$ ./LiveSuit.run

Run LiveSuit:

$ cd /root/Bin/LiveSuit
$ ./LiveSuit.sh

Click on the "Image" button to select an Android image:

• Refer to 编译烧写U-boot to make an installation TF card with U-boot;
• After a TF card is done, take it out and insert it to your board's BOOT card slot. Connect your board to a host PC with a MicroUSB cable and your board will be automatically powered on. Press any key to enter the U-boot commandline mode and run the following command to enter USB download mode:

$ efex

此时PC机上的LiveSuit工具会弹出是否进行烧写的提示，如下:

注意：必须先在PC机上运行LiveSuit，再执行efex命令，否则将检测失败。
点击Yes按钮，开始通过USB将Android系统固件烧写到eMMC中。等待烧写完毕后，断电并从BOOT卡槽中取出TF卡，此时再上电就会从eMMC启动系统了。