Difference between revisions of "Template:S5Pxx18Android"
From FriendlyELEC WiKi
(updated by API) |
(updated by API) |
||
| Line 1: | Line 1: | ||
==Work with Android== | ==Work with Android== | ||
| − | ===Work with 4G Module EC20 under | + | ===Work with 4G Module EC20 under Android5=== |
====Hardware Setup==== | ====Hardware Setup==== | ||
{{#switch: {{{1}}} | {{#switch: {{{1}}} | ||
| Line 20: | Line 20: | ||
}} | }} | ||
Power on the board and you will be able to surf the internet with the 4G module like using an Android phone.<br /> | Power on the board and you will be able to surf the internet with the 4G module like using an Android phone.<br /> | ||
| + | |||
| + | {{#switch: {{{1}}} | ||
| + | | Smart4418 = | ||
| + | ===Connect Smart4418 to 4G Module=== | ||
| + | * The Smart4418 can work with some 4G modules under Android 4.4. After you connect a 4G module (e.g. ME909u-521 which supports FDD-LTE) to a Smart4418 power on the board the 4G module will be activated automatically | ||
| + | [[File:4G Model-nanopc-t3.png|frameless|500px|4G Model]] | ||
| + | | #default = | ||
| + | }} | ||
===Modify the Android boot Logo=== | ===Modify the Android boot Logo=== | ||
Revision as of 05:43, 25 December 2018
Contents
1 Work with Android
1.1 Work with 4G Module EC20 under Android5
1.1.1 Hardware Setup
Connect an EC20 module to a USB to miniPCIe board and connect the board to an ARM board's USB Host. Here is a hardware setup:
Power on the board and you will be able to surf the internet with the 4G module like using an Android phone.
1.2 Modify the Android boot Logo
Replace the logo.bmp:
/opt/FriendlyARM/smart4418/android/device/friendly-arm/nanopi3/boot/logo.bmp /opt/FriendlyARM/smart4418/android/device/friendly-arm/nanopi2/boot/logo.bmp
Replace the bootanimation.zip:
/opt/FriendlyARM/smart4418/android/device/friendly-arm/nanopi3/bootanimation.zip /opt/FriendlyARM/smart4418/android/device/friendly-arm/nanopi2/bootanimation.zip
Re-compile android.
