Difference between revisions of "BakeBit Starter Kit with NanoPi NEO/NEO2/NEO Air"

From FriendlyELEC WiKi
Jump to: navigation, search
(updated by API)
 
(38 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
[[BakeBit/zh|查看中文]]
+
[[BakeBit Starter Kit with NanoPi NEO/NEO2/NEO Air/zh|查看中文]]
  
−
==介绍BakeBit==
+
==Introduction to BakeBit==
−
BakeBit是一套传感器连接的解决方案，包括硬件（NEO-Hub扩展板)和软件(BakeBit)。<br />
+
The BakeBit Starter Kit is a development kit composed of various sensor modules. This kit contains hardware extension boards: a NanoHat Hub, sensor modules and a software utility: BakeBit Library.<br />
−
BakeBit可以让众多传感器可以非常便捷灵活地连接到各个型号的NanoPi开发板上, 即插即用，支持数字、模拟接口，支持I2C与串口连接，所有的传感器都使用统一规格的连接线，从此远离那些乱糟糟的杜邦线与焊锡。<br />
+
The BakeBit modules can be easily connected to and work with FriendlyElec's Nano boards. They support digital interfaces, analog interfaces, I2C interfaces and etc.<br />
 
::[[File:BakeBit2.png| frameless|400px|Bakebit]]
 
::[[File:BakeBit2.png| frameless|400px|Bakebit]]
 
<br />
 
<br />
  
−
==如何在开发板上使用BakeBit==
+
==Connect NanoHat Hub Board to NanoPi NEO/AIR==
−
目前支持的开发板有NanoPi NEO, NanoPi Air，<br />
+
Currently the BakeBit modules work with FriendlyElec's NanoPi NEO and NanoPi NEO Air.<br />
−
连接方法是简单地堆叠[http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_NEO_Hub NEO-Hub]扩展板到你的NanoPi NEO上即可：
+
Use male pin-headers to connect your NanoPi NEO/AIR to the [http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_NEO_Hub NanoHat Hub]:
 
::[[File:NEOHubConnect.jpg| frameless|600px|NEOHubConnect]]<br />
 
::[[File:NEOHubConnect.jpg| frameless|600px|NEOHubConnect]]<br />
  
−
==安装BakeBit软件==
+
==FriendlyElec Boards and Image Files that Work with BakeBit==
 +
Here is a table of the FrendlyElec boards and their image files that work with BakeBit. These image files are under the "officail-ROMs" directory of the download link. Make sure the image file that runs on your board supports BakeBit before you want to play BakeBit with your board.:<br />
  
−
* 第1步 - 通过ssh，或者串口终端进入开发板的命令行，从 github 上下载BakeBit代码:
+
::{| class="wikitable"
 +
|-
 +
  | Board Type
 +
  | Image File
 +
  | Download
 +
|-
 +
  | NanoPi NEO2
 +
  | nanopi-neo2_friendly-core-xenial_4.11.0_YYYYMMDD.img.zip
 +
  | [http://download.friendlyelec.com/NanoPiNEO2 Download Link]
 +
|-
 +
  | NanoPi NEO2
 +
  | nanopi-neo2_friendly-core-xenial_3.10.65_YYYYMMDD.img.zip
 +
  | [http://download.friendlyelec.com/NanoPiNEO2 Download Link]
 +
|-
 +
  | NanoPi NEO
 +
  | nanopi-neo_friendly-core-xenial_4.11.0_YYYYMMDD.img.zip
 +
  | [http://download.friendlyelec.com/NanoPiNEO Download Link]
 +
|-
 +
  | NanoPi NEO
 +
  | nanopi-neo_friendly-core-xenial_3.4.39_YYYYMMDD.img.zip
 +
  | [http://download.friendlyelec.com/NanoPiNEO Download Link]
 +
|-
 +
  | NanoPi NEO Air
 +
  | nanopi-neo-air_friendly-core-xenial_4.11.0_YYYYMMDD.img.zip
 +
  | [http://download.friendlyelec.com/NanoPiNEOAir Download Link]
 +
|-
 +
  | NanoPi NEO Air
 +
  | nanopi-neo-air-ubuntu-core-qte-sd4g-YYYYMMDD.img.zip
 +
  | [http://download.friendlyelec.com/NanoPiNEOAir Download Link]
 +
|}
 +
 
 +
==Install BakeBit Package==
 +
* Connect your NanoPi NEO/AIR to the internet, open a terminal on your NanoPi NEO/AIR from SSH login and download the BakeBit source code from github:
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
 
cd  ~
 
cd  ~
Line 20: Line 53:
 
</syntaxhighlight>
 
</syntaxhighlight>
  
−
* 第2步 - 使用如下命令在开发板上安装BakeBit:
+
* Run the installation script for BakeBit:
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
 
cd BakeBit/Script
 
cd BakeBit/Script
 
chmod +x install.sh
 
chmod +x install.sh
−
./install.sh
+
sudo ./install.sh
 
</syntaxhighlight>
 
</syntaxhighlight>
  
−
* 第3步 - 重启开发板:
+
* Reboot your board after installation is finished:
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
 
reboot
 
reboot
 
</syntaxhighlight>
 
</syntaxhighlight>
 +
<!---
 +
* Verify BakeBit Functions:
 +
Connect a BakeBit Starter Kit’s LED module to the NanoHat Hub's D3 interface and run the following command on the NanoPi NEO's command line: <br />
 +
<syntaxhighlight lang="bash">
 +
python ~/BakeBit/Software/Python/bakebit_led_blink.py
 +
</syntaxhighlight>
 +
If the LED is blinking your BakeBit is proved to be working.
 +
--->
  
−
* 第4步 - 验证BakeBit是否正常工作:
+
==Run Code Sample in Python==
−
将LED配件连接到NEO-Hub上的D3插座，在命令行执行以下命令操作LED: <br />
+
Connect a BakeBit Starter Kit’s LED module to the NanoHat Hub's D3 interface and run the following command on a master device's command line:<br />
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
−
python ~/BakeBit/Software/Python/grove_led_blink.py
+
python ~/BakeBit/Software/Python/bakebit_led_blink.py
 
</syntaxhighlight>
 
</syntaxhighlight>
−
看到LED闪烁，恭喜你，BakeBit已经为你准备好了！
+
If the LED is blinking your BakeBit is proved to be working. For more code samples in Python you can check them in the directory ~/BakeBit/Software/Python/  .
 +
 
 +
==Run Code Sample in C==
 +
Connect a BakeBit Starter Kit’s LED module to the NanoHat Hub's D4 interface and run the following commands on a master device's command line:<br />
 +
<syntaxhighlight lang="bash">
 +
cd ~/BakeBit/Software/C/
 +
gcc bakebit_digital_write.c bakebit.c -Wall
 +
./a.out
 +
</syntaxhighlight>
 +
If the LED is blinking your BakeBit is proved to be working. For more code samples in C you can check them in the directory ~/BakeBit/Software/C/ .
  
 
==BakeBit Starter Kit==
 
==BakeBit Starter Kit==
−
 
+
The BakeBit Starter Kit currently contains 12 sensor modules.<br />
−
BakeBit Starter Kit是一个基础套件，包含了适用于NanoPi NEO的NEO-Hub扩展板及12个传感器。<br />
+
Here is a list of the sensor modules:
−
下表列出了该套件所包含的传感器：
+
  
 
::{| class="wikitable"
 
::{| class="wikitable"
 
|-
 
|-
−
|1    || '''BakeBit-Button'''<br />[[File:BakeBit - Button01.jpg |frameless|150px]]    || '''按钮开关模块'''<br />
+
|1    || '''BakeBit-Button'''<br />[[File:BakeBit - Button01.jpg |frameless|150px]]    || '''Button'''<br />
−
'''连接方式''': 连接到数字接口 D3 或D5<br />
+
'''Connection''': to NanoHat Hub's Digital Interface D2 ~D5<br />
−
'''示例源代码''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_buzzer.py <br />
+
'''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_button.py <br />
−
'''WiKi网址''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Buzzer <br />
+
'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Button <br />
 
|-
 
|-
−
|2  || '''BBakeBit-Buzzer'''<br />[[File:BakeBit - Buzzer.jpg |frameless|150px]]    || '''蜂鸣器模块'''<br />
+
|2  || '''BBakeBit-Buzzer'''<br />[[File:BakeBit - Buzzer.jpg |frameless|150px]]    || '''Buzzer'''<br />
−
'''连接方式''': 连接到数字接口 D2 ~ D5<br />
+
'''Connection''': to NanoHat Hub's Digital Interface D3 or D5<br />
−
'''示例源代码''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_button.py<br />
+
'''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_buzzer.py<br />
−
'''WiKi网址''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Button <br />
+
'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Buzzer <br />
 
|-
 
|-
−
|3    || '''BakeBit-Green LED'''<br />[[File:BakeBit_-_Green_LED.jpg |frameless|150px]]    || '''绿色的LED发光二极管模块，亮度可调节'''<br />
+
|3    || '''BakeBit-Green LED'''<br />[[File:BakeBit_-_Green_LED.jpg |frameless|150px]]    || '''Green LED, Luminance Adjustable'''<br />
−
'''连接方式''': 连接到数字接口 D2 ~D5<br />
+
'''Connection''': to NanoHat Hub's Digital Interface D2 ~D5<br />
−
'''示例源代码''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_led_blink.py <br />
+
'''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_led_blink.py <br />
−
'''WiKi网址''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Green_LED <br />
+
'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Green_LED <br />
 
|-
 
|-
−
|4  || '''BakeBit-JoyStick'''<br />[[File:BakeBit_-_JoyStick.jpg |frameless|150px]]    || '''摇杆模块'''<br />
+
|4  || '''BakeBit-JoyStick'''<br />[[File:BakeBit_-_JoyStick.jpg |frameless|150px]]    || '''Joystick'''<br />
−
'''连接方式''': 连接到模拟接口 A0 ~D2<br />
+
'''Connection''': to NanoHat Hub's Analog Interface A0 ~A2<br />
−
'''示例源代码''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_prj_UIControl_via_Joystick.py <br />
+
'''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_prj_UIControl_via_Joystick.py <br />
−
'''WiKi网址''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_JoyStick <br />
+
'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_JoyStick <br />
 
|-
 
|-
−
|5  || '''BakeBit-LED Bar'''<br />[[File:BakeBit_-_LED_Bar.jpg |frameless|150px]]    || '''多彩LED模块，由五个多彩LED发光二极管组成'''<br />
+
|5  || '''BakeBit-LED Bar'''<br />[[File:BakeBit_-_LED_Bar.jpg |frameless|150px]]    || '''Multi-Color LED Bar, Five LEDs'''<br />
−
'''连接方式''': 连接到数字接口D3或D5<br />
+
'''Connection''': to NanoHat Hub's Digital Interface D3 or D5<br />
−
'''示例源代码''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_ledbar.py <br />
+
'''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_ledbar.py <br />
−
'''WiKi网址''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_LED_Bar <br />
+
'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_LED_Bar <br />
 
|-
 
|-
−
|6  || '''BakeBit-Light Sensor'''<br />[[File:BakeBit - Light Sensor.jpg|frameless|120px]]    || '''光敏电阻模块'''<br />
+
|6  || '''BakeBit-Light Sensor'''<br />[[File:BakeBit - Light Sensor.jpg|frameless|120px]]    || '''Light Sensor'''<br />
−
'''连接方式''': 连接到模拟接口A0~A2<br />
+
'''Connection''': to NanoHat Hub's Analog Interface A0~A2<br />
−
'''示例源代码''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_light_sensor.py <br />
+
'''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_light_sensor.py <br />
−
'''WiKi网址''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Light_Sensor <br />
+
'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Light_Sensor <br />
 
|-
 
|-
−
|7  || '''BakeBit-OLED 128X64'''<br />[[File:BakeBit - Button01.jpg |frameless|150px]]    || '''单色OLED屏幕 (0.96寸、128x64分辨率)'''<br />
+
|7  || '''BakeBit-OLED 128X64'''<br />[[File:BakeBit_-_OLED.jpg |frameless|150px]]    || '''Monochromatic OLED (0.96”, 128x64)'''<br />
−
'''连接方式''': 连接到I2C接口<br />
+
'''Connection''': to NanoHat Hub's I2C Interface<br />
−
'''示例源代码''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_128_64_oled_test.py<br />
+
'''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_128_64_oled_test.py<br />
−
'''WiKi网址''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_OLED_128x64 <br />
+
'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_OLED_128x64 <br />
 
|-
 
|-
−
|8  || '''BakeBit-Red LED'''<br />[[File:BakeBit_-_Red_LED.jpg |frameless|150px]]    || '''红色LED模块，亮度可调节'''<br />
+
|8  || '''BakeBit-Red LED'''<br />[[File:BakeBit_-_Red_LED.jpg |frameless|150px]]    || '''Red LED, Luminance Adjustable'''<br />
−
'''连接方式''': 连接到数字接口 D2 ~D5<br />
+
'''Connection''': to NanoHat Hub's Digital Interface D2 ~D5<br />
−
'''示例源代码''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_led_blink.py <br />
+
'''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_led_blink.py <br />
−
'''WiKi网址''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Red_LED <br />
+
'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Red_LED <br />
 
|-
 
|-
−
|9  || '''BakeBit - Rotary Angle Sensor'''<br />[[File:BakeBit_-_Rotary_Angle_Senso.jpg |frameless|150px]]    || '''电位器'''<br />
+
|9  || '''BakeBit - Rotary Angle Sensor'''<br />[[File:BakeBit_-_Rotary_Angle_Senso.jpg |frameless|150px]]    || '''Rotary Angle Sensor'''<br />
−
'''连接方式''': 连接到模拟接口 A0~A2<br />
+
'''Connection''': to NanoHat Hub's Analog Interface A0~A2<br />
−
'''示例源代码''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_rotary_angle_sensor.py <br />
+
'''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_rotary_angle_sensor.py <br />
−
'''WiKi网址''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Rotary_Angle_Sensor <br />
+
'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Rotary_Angle_Sensor <br />
 
|-
 
|-
−
|10  || '''BakeBit - Servo'''<br />[[File:BakeBit - Servo.jpg|frameless|120px]]    || '''舵机模块'''<br />
+
|10  || '''BakeBit - Servo'''<br />[[File:BakeBit - Servo.jpg|frameless|120px]]    || '''Servo'''<br />
−
'''连接方式''': 连接到数字接口 D3或D5<br />
+
'''Connection''': to NanoHat Hub's Digital Interface D3 or D5<br />
−
'''示例源代码''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_servo.py<br />
+
'''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_servo.py<br />
−
'''WiKi网址''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Servo <br />
+
'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Servo <br />
 
|-
 
|-
−
|11    || '''BakeBit - Sound Sensor'''<br />[[File:BakeBit_-_Sound_Sensor.jpg |frameless|150px]]    || '''声音检测模块，用于检测声音信号'''<br />
+
|11    || '''BakeBit - Sound Sensor'''<br />[[File:BakeBit_-_Sound_Sensor.jpg |frameless|150px]]    || '''Sound Sensor'''<br />
−
'''连接方式''': 连接到模拟接口A0~A2<br />
+
'''Connection''': to NanoHat Hub's Analog Interface A0~A2<br />
−
'''示例源代码''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_sound_sensor.py<br />
+
'''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_sound_sensor.py<br />
−
'''WiKi网址''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Sound_Sensor <br />
+
'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Sound_Sensor <br />
 
|-
 
|-
−
|12    || '''BakeBit - Ultrasonic'''<br />[[File:BakeBit_-_Ultrasonic.jpg |frameless|150px]]    || '''超声波模块，用来探测障碍物，并计算到障碍物距离'''<br />
+
|12    || '''BakeBit - Ultrasonic'''<br />[[File:BakeBit_-_Ultrasonic.jpg |frameless|150px]]    || '''Ultrasonic Sensor, Measure Distance'''<br />
−
'''连接方式''': 连接到数字接口D2~D5<br />
+
'''Connection''': to NanoHat Hub's Digital Interface D2~D5<br />
−
'''示例源代码''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_ultrasonic.py<br />
+
'''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_ultrasonic.py<br />
−
'''WiKi网址''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Ultrasonic <br />
+
'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Ultrasonic <br />
 
|-
 
|-
 
|}
 
|}
  
−
==其它相关资源==
+
==Resources==
−
github项目网址: https://github.com/friendlyarm/BakeBit <br />
+
Project Page: https://github.com/friendlyarm/BakeBit <br />
−
PDF手册: http://wiki.friendlyarm.com/bakebit/bakebit_starter_kit_manual_cn.pdf <br />
+
User's Manual in PDF: http://wiki.friendlyelec.com/bakebit/bakebit_starter_kit_manual_en.pdf <br />
 +
 
 +
==Update Log==
 +
===December-11-2016===
 +
* Released English version
 +
 
 +
===Jan-19-2017===
 +
* Renamed "NEO-Hub" to "NanoHat-Hub"
 +
 
 +
===Jan-20-2017===
 +
* Renamed "NanoHat-Hub" to "NanoHat Hub"
 +
 
 +
===May-24-2017===
 +
* Added section 3
 +
 
 +
===May-29-2017===
 +
* Added sections 5 and 6

Latest revision as of 07:17, 21 February 2022

查看中文

1 Introduction to BakeBit

The BakeBit Starter Kit is a development kit composed of various sensor modules. This kit contains hardware extension boards: a NanoHat Hub, sensor modules and a software utility: BakeBit Library.
The BakeBit modules can be easily connected to and work with FriendlyElec's Nano boards. They support digital interfaces, analog interfaces, I2C interfaces and etc.

Bakebit


2 Connect NanoHat Hub Board to NanoPi NEO/AIR

Currently the BakeBit modules work with FriendlyElec's NanoPi NEO and NanoPi NEO Air.
Use male pin-headers to connect your NanoPi NEO/AIR to the NanoHat Hub:

NEOHubConnect

3 FriendlyElec Boards and Image Files that Work with BakeBit

Here is a table of the FrendlyElec boards and their image files that work with BakeBit. These image files are under the "officail-ROMs" directory of the download link. Make sure the image file that runs on your board supports BakeBit before you want to play BakeBit with your board.:

Board Type Image File Download
NanoPi NEO2 nanopi-neo2_friendly-core-xenial_4.11.0_YYYYMMDD.img.zip Download Link
NanoPi NEO2 nanopi-neo2_friendly-core-xenial_3.10.65_YYYYMMDD.img.zip Download Link
NanoPi NEO nanopi-neo_friendly-core-xenial_4.11.0_YYYYMMDD.img.zip Download Link
NanoPi NEO nanopi-neo_friendly-core-xenial_3.4.39_YYYYMMDD.img.zip Download Link
NanoPi NEO Air nanopi-neo-air_friendly-core-xenial_4.11.0_YYYYMMDD.img.zip Download Link
NanoPi NEO Air nanopi-neo-air-ubuntu-core-qte-sd4g-YYYYMMDD.img.zip Download Link

4 Install BakeBit Package

  • Connect your NanoPi NEO/AIR to the internet, open a terminal on your NanoPi NEO/AIR from SSH login and download the BakeBit source code from github:
cd  ~
git clone https://github.com/friendlyarm/BakeBit.git
  • Run the installation script for BakeBit:
cd BakeBit/Script
chmod +x install.sh
sudo ./install.sh
  • Reboot your board after installation is finished:
reboot

5 Run Code Sample in Python

Connect a BakeBit Starter Kit’s LED module to the NanoHat Hub's D3 interface and run the following command on a master device's command line:

python ~/BakeBit/Software/Python/bakebit_led_blink.py

If the LED is blinking your BakeBit is proved to be working. For more code samples in Python you can check them in the directory ~/BakeBit/Software/Python/ .

6 Run Code Sample in C

Connect a BakeBit Starter Kit’s LED module to the NanoHat Hub's D4 interface and run the following commands on a master device's command line:

cd ~/BakeBit/Software/C/
gcc bakebit_digital_write.c bakebit.c -Wall
./a.out

If the LED is blinking your BakeBit is proved to be working. For more code samples in C you can check them in the directory ~/BakeBit/Software/C/ .

7 BakeBit Starter Kit

The BakeBit Starter Kit currently contains 12 sensor modules.
Here is a list of the sensor modules:

1 BakeBit-Button
BakeBit - Button01.jpg 		Button

Connection: to NanoHat Hub's Digital Interface D2 ~D5
Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_button.py
WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Button

2 BBakeBit-Buzzer
BakeBit - Buzzer.jpg 		Buzzer

Connection: to NanoHat Hub's Digital Interface D3 or D5
Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_buzzer.py
WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Buzzer

3 BakeBit-Green LED
BakeBit - Green LED.jpg 		Green LED, Luminance Adjustable

Connection: to NanoHat Hub's Digital Interface D2 ~D5
Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_led_blink.py
WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Green_LED

4 BakeBit-JoyStick
BakeBit - JoyStick.jpg 		Joystick

Connection: to NanoHat Hub's Analog Interface A0 ~A2
Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_prj_UIControl_via_Joystick.py
WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_JoyStick

5 BakeBit-LED Bar
BakeBit - LED Bar.jpg 		Multi-Color LED Bar, Five LEDs

Connection: to NanoHat Hub's Digital Interface D3 or D5
Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_ledbar.py
WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_LED_Bar

6 BakeBit-Light Sensor
BakeBit - Light Sensor.jpg 		Light Sensor

Connection: to NanoHat Hub's Analog Interface A0~A2
Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_light_sensor.py
WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Light_Sensor

7 BakeBit-OLED 128X64
BakeBit - OLED.jpg 		Monochromatic OLED (0.96”, 128x64)

Connection: to NanoHat Hub's I2C Interface
Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_128_64_oled_test.py
WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_OLED_128x64

8 BakeBit-Red LED
BakeBit - Red LED.jpg 		Red LED, Luminance Adjustable

Connection: to NanoHat Hub's Digital Interface D2 ~D5
Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_led_blink.py
WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Red_LED

9 BakeBit - Rotary Angle Sensor
BakeBit - Rotary Angle Senso.jpg 		Rotary Angle Sensor

Connection: to NanoHat Hub's Analog Interface A0~A2
Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_rotary_angle_sensor.py
WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Rotary_Angle_Sensor

10 BakeBit - Servo
BakeBit - Servo.jpg 		Servo

Connection: to NanoHat Hub's Digital Interface D3 or D5
Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_servo.py
WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Servo

11 BakeBit - Sound Sensor
BakeBit - Sound Sensor.jpg 		Sound Sensor

Connection: to NanoHat Hub's Analog Interface A0~A2
Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_sound_sensor.py
WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Sound_Sensor

12 BakeBit - Ultrasonic
BakeBit - Ultrasonic.jpg 		Ultrasonic Sensor, Measure Distance

Connection: to NanoHat Hub's Digital Interface D2~D5
Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_ultrasonic.py
WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Ultrasonic

8 Resources

Project Page: https://github.com/friendlyarm/BakeBit
User's Manual in PDF: http://wiki.friendlyelec.com/bakebit/bakebit_starter_kit_manual_en.pdf

9 Update Log

9.1 December-11-2016

  • Released English version

9.2 Jan-19-2017

  • Renamed "NEO-Hub" to "NanoHat-Hub"

9.3 Jan-20-2017

  • Renamed "NanoHat-Hub" to "NanoHat Hub"

9.4 May-24-2017

  • Added section 3

9.5 May-29-2017

  • Added sections 5 and 6
Retrieved from "https://wiki.friendlyelec.com/wiki/index.php?title=BakeBit_Starter_Kit_with_NanoPi_NEO/NEO2/NEO_Air&oldid=22572"