Difference between revisions of "BakeBit Starter Kit with NanoPi NEO/NEO2/NEO Air"

Latest revision as of 07:17, 21 February 2022

1 Introduction to BakeBit

The BakeBit Starter Kit is a development kit composed of various sensor modules. This kit contains hardware extension boards: a NanoHat Hub, sensor modules and a software utility: BakeBit Library.
The BakeBit modules can be easily connected to and work with FriendlyElec's Nano boards. They support digital interfaces, analog interfaces, I2C interfaces and etc.

2 Connect NanoHat Hub Board to NanoPi NEO/AIR

Currently the BakeBit modules work with FriendlyElec's NanoPi NEO and NanoPi NEO Air.
Use male pin-headers to connect your NanoPi NEO/AIR to the NanoHat Hub:

3 FriendlyElec Boards and Image Files that Work with BakeBit

Here is a table of the FrendlyElec boards and their image files that work with BakeBit. These image files are under the "officail-ROMs" directory of the download link. Make sure the image file that runs on your board supports BakeBit before you want to play BakeBit with your board.:

Board Type	Image File	Download
NanoPi NEO2	nanopi-neo2_friendly-core-xenial_4.11.0_YYYYMMDD.img.zip	Download Link
NanoPi NEO2	nanopi-neo2_friendly-core-xenial_3.10.65_YYYYMMDD.img.zip	Download Link
NanoPi NEO	nanopi-neo_friendly-core-xenial_4.11.0_YYYYMMDD.img.zip	Download Link
NanoPi NEO	nanopi-neo_friendly-core-xenial_3.4.39_YYYYMMDD.img.zip	Download Link
NanoPi NEO Air	nanopi-neo-air_friendly-core-xenial_4.11.0_YYYYMMDD.img.zip	Download Link
NanoPi NEO Air	nanopi-neo-air-ubuntu-core-qte-sd4g-YYYYMMDD.img.zip	Download Link

4 Install BakeBit Package

Connect your NanoPi NEO/AIR to the internet, open a terminal on your NanoPi NEO/AIR from SSH login and download the BakeBit source code from github:

cd  ~
git clone https://github.com/friendlyarm/BakeBit.git

Run the installation script for BakeBit:

cd BakeBit/Script
chmod +x install.sh
sudo ./install.sh

Reboot your board after installation is finished:

reboot

5 Run Code Sample in Python

Connect a BakeBit Starter Kit’s LED module to the NanoHat Hub's D3 interface and run the following command on a master device's command line:

python ~/BakeBit/Software/Python/bakebit_led_blink.py

If the LED is blinking your BakeBit is proved to be working. For more code samples in Python you can check them in the directory ~/BakeBit/Software/Python/ .

6 Run Code Sample in C

Connect a BakeBit Starter Kit’s LED module to the NanoHat Hub's D4 interface and run the following commands on a master device's command line:

cd ~/BakeBit/Software/C/
gcc bakebit_digital_write.c bakebit.c -Wall
./a.out

If the LED is blinking your BakeBit is proved to be working. For more code samples in C you can check them in the directory ~/BakeBit/Software/C/ .

7 BakeBit Starter Kit

The BakeBit Starter Kit currently contains 12 sensor modules.
Here is a list of the sensor modules:

1	BakeBit-Button	Button Connection: to NanoHat Hub's Digital Interface D2 ~D5 Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_button.py WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Button
2	BBakeBit-Buzzer	Buzzer Connection: to NanoHat Hub's Digital Interface D3 or D5 Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_buzzer.py WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Buzzer
3	BakeBit-Green LED	Green LED, Luminance Adjustable Connection: to NanoHat Hub's Digital Interface D2 ~D5 Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_led_blink.py WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Green_LED
4	BakeBit-JoyStick	Joystick Connection: to NanoHat Hub's Analog Interface A0 ~A2 Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_prj_UIControl_via_Joystick.py WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_JoyStick
5	BakeBit-LED Bar	Multi-Color LED Bar, Five LEDs Connection: to NanoHat Hub's Digital Interface D3 or D5 Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_ledbar.py WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_LED_Bar
6	BakeBit-Light Sensor	Light Sensor Connection: to NanoHat Hub's Analog Interface A0~A2 Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_light_sensor.py WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Light_Sensor
7	BakeBit-OLED 128X64	Monochromatic OLED (0.96”, 128x64) Connection: to NanoHat Hub's I2C Interface Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_128_64_oled_test.py WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_OLED_128x64
8	BakeBit-Red LED	Red LED, Luminance Adjustable Connection: to NanoHat Hub's Digital Interface D2 ~D5 Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_led_blink.py WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Red_LED
9	BakeBit - Rotary Angle Sensor	Rotary Angle Sensor Connection: to NanoHat Hub's Analog Interface A0~A2 Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_rotary_angle_sensor.py WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Rotary_Angle_Sensor
10	BakeBit - Servo	Servo Connection: to NanoHat Hub's Digital Interface D3 or D5 Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_servo.py WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Servo
11	BakeBit - Sound Sensor	Sound Sensor Connection: to NanoHat Hub's Analog Interface A0~A2 Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_sound_sensor.py WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Sound_Sensor
12	BakeBit - Ultrasonic	Ultrasonic Sensor, Measure Distance Connection: to NanoHat Hub's Digital Interface D2~D5 Source Code: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_ultrasonic.py WiKi Site: http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Ultrasonic

8 Resources

Project Page: https://github.com/friendlyarm/BakeBit
User's Manual in PDF: http://wiki.friendlyelec.com/bakebit/bakebit_starter_kit_manual_en.pdf

9 Update Log

9.1 December-11-2016

Released English version

9.2 Jan-19-2017

Renamed "NEO-Hub" to "NanoHat-Hub"

9.3 Jan-20-2017

Renamed "NanoHat-Hub" to "NanoHat Hub"

9.4 May-24-2017

Added section 3

9.5 May-29-2017

Added sections 5 and 6

@@ Line 9: / Line 9: @@
 ==Connect NanoHat Hub Board to NanoPi NEO/AIR==
 Currently the BakeBit modules work with FriendlyElec's NanoPi NEO and NanoPi NEO Air.<br />
-Use male pin-headers to connect your NanoPi NEO/AIR to the [http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_NEO_Hub NanoHat Hub]:
+Use male pin-headers to connect your NanoPi NEO/AIR to the [http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_NEO_Hub NanoHat Hub]:
 ::[[File:NEOHubConnect.jpg| frameless|600px|NEOHubConnect]]<br />
@@ Line 17: / Line 17: @@
 ::{| class="wikitable"
 |-
-|Board Type||Image File||Download Link 1||Download Link 2
+  | Board Type
+  | Image File
+  | Download
 |-
-|NanoPi NEO2|| nanopi-neo2_ubuntu-core-xenial_4.11.0_YYYYMMDD.img.zip||[https://pan.baidu.com/s/1eRDbeG6 baidu space] ||[https://www.mediafire.com/folder/ah4i6w029912b/NanoPi-NEO2 MediaFire]
+  | NanoPi NEO2
+  | nanopi-neo2_friendly-core-xenial_4.11.0_YYYYMMDD.img.zip
+  | [http://download.friendlyelec.com/NanoPiNEO2 Download Link]
 |-
-|NanoPi NEO2|| nanopi-neo2_ubuntu-core-xenial_3.10.65_YYYYMMDD.img.zip||[https://pan.baidu.com/s/1eRDbeG6 baidu space] ||[https://www.mediafire.com/folder/ah4i6w029912b/NanoPi-NEO2 MediaFire]
+  | NanoPi NEO2
+  | nanopi-neo2_friendly-core-xenial_3.10.65_YYYYMMDD.img.zip
+  | [http://download.friendlyelec.com/NanoPiNEO2 Download Link]
 |-
-|NanoPi NEO||nanopi-neo_ubuntu-core-xenial_4.11.0_YYYYMMDD.img.zip||[http://pan.baidu.com/s/1boQFxN5 baidu space]||[https://www.mediafire.com/folder/n5o8ihvqhnf6s/Nanopi-NEO MediaFire]
+  | NanoPi NEO
+  | nanopi-neo_friendly-core-xenial_4.11.0_YYYYMMDD.img.zip
+  | [http://download.friendlyelec.com/NanoPiNEO Download Link]
 |-
-|NanoPi NEO||nanopi-neo_ubuntu-core-xenial_3.4.39_YYYYMMDD.img.zip||[http://pan.baidu.com/s/1boQFxN5 baidu space]||[https://www.mediafire.com/folder/n5o8ihvqhnf6s/Nanopi-NEO MediaFire]
+  | NanoPi NEO
+  | nanopi-neo_friendly-core-xenial_3.4.39_YYYYMMDD.img.zip
+  | [http://download.friendlyelec.com/NanoPiNEO Download Link]
 |-
-|NanoPi NEO Air||nanopi-neo-air_ubuntu-core-xenial_4.11.0_YYYYMMDD.img.zip||[https://pan.baidu.com/s/1kUMRucf baidu space]||[https://www.mediafire.com/folder/sr5d0qpz774cs/NanoPi-NEO_Air MediaFire]
+  | NanoPi NEO Air
+  | nanopi-neo-air_friendly-core-xenial_4.11.0_YYYYMMDD.img.zip
+  | [http://download.friendlyelec.com/NanoPiNEOAir Download Link]
 |-
-|NanoPi NEO Air||nanopi-neo-air-ubuntu-core-qte-sd4g-YYYYMMDD.img.zip||[https://pan.baidu.com/s/1kUMRucf baidu space]||[https://www.mediafire.com/folder/sr5d0qpz774cs/NanoPi-NEO_Air MediaFire]
+  | NanoPi NEO Air
+  | nanopi-neo-air-ubuntu-core-qte-sd4g-YYYYMMDD.img.zip
+  | [http://download.friendlyelec.com/NanoPiNEOAir Download Link]
 |}
@@ Line 84: / Line 98: @@
 '''Connection''': to NanoHat Hub's Digital Interface D2 ~D5<br />
 '''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_button.py <br />
-'''WiKi Site''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Button <br />
+'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Button <br />
 |-
 |2   || '''BBakeBit-Buzzer'''<br />[[File:BakeBit - Buzzer.jpg |frameless|150px]]    || '''Buzzer'''<br />
 '''Connection''': to NanoHat Hub's Digital Interface D3 or D5<br />
 '''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_buzzer.py<br />
-'''WiKi Site''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Buzzer <br />
+'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Buzzer <br />
 |-
 |3    || '''BakeBit-Green LED'''<br />[[File:BakeBit_-_Green_LED.jpg |frameless|150px]]    || '''Green LED, Luminance Adjustable'''<br />
 '''Connection''': to NanoHat Hub's Digital Interface D2 ~D5<br />
 '''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_led_blink.py <br />
-'''WiKi Site''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Green_LED <br />
+'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Green_LED <br />
 |-
 |4   || '''BakeBit-JoyStick'''<br />[[File:BakeBit_-_JoyStick.jpg |frameless|150px]]    || '''Joystick'''<br />
 '''Connection''': to NanoHat Hub's Analog Interface A0 ~A2<br />
 '''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_prj_UIControl_via_Joystick.py <br />
-'''WiKi Site''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_JoyStick <br />
+'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_JoyStick <br />
 |-
 |5   || '''BakeBit-LED Bar'''<br />[[File:BakeBit_-_LED_Bar.jpg |frameless|150px]]    || '''Multi-Color LED Bar, Five LEDs'''<br />
 '''Connection''': to NanoHat Hub's Digital Interface D3 or D5<br />
 '''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_ledbar.py <br />
-'''WiKi Site''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_LED_Bar <br />
+'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_LED_Bar <br />
 |-
 |6   || '''BakeBit-Light Sensor'''<br />[[File:BakeBit - Light Sensor.jpg|frameless|120px]]    || '''Light Sensor'''<br />
 '''Connection''': to NanoHat Hub's Analog Interface A0~A2<br />
 '''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_light_sensor.py <br />
-'''WiKi Site''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Light_Sensor <br />
+'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Light_Sensor <br />
 |-
 |7   || '''BakeBit-OLED 128X64'''<br />[[File:BakeBit_-_OLED.jpg |frameless|150px]]    || '''Monochromatic OLED (0.96”, 128x64)'''<br />
 '''Connection''': to NanoHat Hub's I2C Interface<br />
 '''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_128_64_oled_test.py<br />
-'''WiKi Site''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_OLED_128x64 <br />
+'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_OLED_128x64 <br />
 |-
 |8   || '''BakeBit-Red LED'''<br />[[File:BakeBit_-_Red_LED.jpg |frameless|150px]]    || '''Red LED, Luminance Adjustable'''<br />
 '''Connection''': to NanoHat Hub's Digital Interface D2 ~D5<br />
 '''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_led_blink.py <br />
-'''WiKi Site''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Red_LED <br />
+'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Red_LED <br />
 |-
 |9   || '''BakeBit - Rotary Angle Sensor'''<br />[[File:BakeBit_-_Rotary_Angle_Senso.jpg |frameless|150px]]    || '''Rotary Angle Sensor'''<br />
 '''Connection''': to NanoHat Hub's Analog Interface A0~A2<br />
 '''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_rotary_angle_sensor.py <br />
-'''WiKi Site''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Rotary_Angle_Sensor <br />
+'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Rotary_Angle_Sensor <br />
 |-
 |10   || '''BakeBit - Servo'''<br />[[File:BakeBit - Servo.jpg|frameless|120px]]    || '''Servo'''<br />
 '''Connection''': to NanoHat Hub's Digital Interface D3 or D5<br />
 '''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_servo.py<br />
-'''WiKi Site''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Servo <br />
+'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Servo <br />
 |-
 |11    || '''BakeBit - Sound Sensor'''<br />[[File:BakeBit_-_Sound_Sensor.jpg |frameless|150px]]    || '''Sound Sensor'''<br />
 '''Connection''': to NanoHat Hub's Analog Interface A0~A2<br />
 '''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_sound_sensor.py<br />
-'''WiKi Site''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Sound_Sensor <br />
+'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Sound_Sensor <br />
 |-
 |12    || '''BakeBit - Ultrasonic'''<br />[[File:BakeBit_-_Ultrasonic.jpg |frameless|150px]]    || '''Ultrasonic Sensor, Measure Distance'''<br />
 '''Connection''': to NanoHat Hub's Digital Interface D2~D5<br />
 '''Source Code''': https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_ultrasonic.py<br />
-'''WiKi Site''': http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Ultrasonic <br />
+'''WiKi Site''': http://wiki.friendlyelec.com/wiki/index.php/BakeBit_-_Ultrasonic <br />
 |-
 |}
@@ Line 145: / Line 159: @@
 ==Resources==
 Project Page: https://github.com/friendlyarm/BakeBit <br />
-User's Manual in PDF: http://wiki.friendlyarm.com/bakebit/bakebit_starter_kit_manual_en.pdf <br />
+User's Manual in PDF: http://wiki.friendlyelec.com/bakebit/bakebit_starter_kit_manual_en.pdf <br />
 ==Update Log==

Difference between revisions of "BakeBit Starter Kit with NanoPi NEO/NEO2/NEO Air"

Latest revision as of 07:17, 21 February 2022

Contents

1 Introduction to BakeBit

2 Connect NanoHat Hub Board to NanoPi NEO/AIR

3 FriendlyElec Boards and Image Files that Work with BakeBit

4 Install BakeBit Package

5 Run Code Sample in Python

6 Run Code Sample in C

7 BakeBit Starter Kit

8 Resources

9 Update Log

9.1 December-11-2016

9.2 Jan-19-2017

9.3 Jan-20-2017

9.4 May-24-2017

9.5 May-29-2017

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Products

FAQ

Support

Tools