Difference between revisions of "APITestPage"

From FriendlyELEC WiKi
Jump to: navigation, search
(updated by API)
(updated by API)
 
(20 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
[[NanoPC-T6/zh|查看中文]]
 
−
<!--
 
−
[[File:NanoPC-T6-01B.jpg|thumb|Overview]]
 
−
[[File:NanoPC-T6-A01.jpg|thumb|Front]]
 
−
[[File:NanoPC-T6-B01.jpg|thumb|Back]]
 
−
[[File:T6-01.jpg|thumb|frameless|250x250px|Case]]
 
−
[[File:T6-02.jpg|thumb|frameless|250x250px|Case]]
 
−
[[File:T6-03.jpg|thumb|frameless|250x250px|Case]]
 
−
[[File:T6-04.jpg|thumb|frameless|250x250px|Case]]
 
−
-->
 
−
[[File:NanoPC-T6LTS-01B.jpg|thumb|Overview]]
 
−
[[File:NanoPC-T6LTS-A01.jpg|thumb|Front]]
 
−
[[File:NanoPC-T6LTS-B01.jpg|thumb|Back]]
 
−
[[File:T6LTS-01.jpg|thumb|frameless|250x250px|Case]]
 
−
[[File:T6LTS-02.jpg|thumb|frameless|250x250px|Case]]
 
−
[[File:T6LTS-03.jpg|thumb|frameless|250x250px|Case]]
 
−
<!--
 
−
[[File:T6LTS-04.jpg|thumb|frameless|250x250px|Case]]
 
−
-->
 
−
==Introduction==
 
−
NanoPC-T6 LTS (as "T6") is a one-for-all high performance open source platform for edge computing, designed and developed by the FriendlyElec team. <br/><br/>
 
−
It has two 2.5G Ethernet ports. It is based on Rockchip's RK3588, and has 4GB/8GB/16G LPDDR4x RAM and an optional 32GB/64GB/256/0GB eMMC flash. It works with systems including OpenMediaVault, FriendlyWrt, Android, Android TV, Debian, Ubuntu etc. It supports GPU and VPU acceleration.<br/><br/>
 
−
T6 is a compact board of 110 x 80 mm with rich hardware resources and an optional CNC metal case. It has 2 HDMI output ports and 1 HDMI IN port. T6 can play video streams including 8K60p H.265/VP9 , 8K30p H264 etc and record video streams including 4K60p H.265. T6 has one M.2 B-Key slot that supports an M.2 NVME SSD disk, one M.2 E-Key that supports an M.2 2230 WiFi module.<br/><br/>
 
−
In addition, T6 has one USB 3.0 and two USB 2.0 ports, and one full-featured USB-C port that is powered by DC-12V.<br/><br/>
 
−
In summary, T6 is well suited for enterprise customers to develop mini machine vision systems with multiple Ethernet ports and for embedded system hobbyists to explore and implement prototype designs.
 
  
−
==Hardware Spec==
+
{{BurnLinuxToExtDrive-Rockchip/zh|NanoPC-T4}}
−
* SoC: Rockchip RK3588
+
{{BurnLinuxToExtDrive-Rockchip|NanoPC-T4}}
−
** CPU: Quad-core ARM Cortex-A76(up to 2.4GHz) and quad-core Cortex-A55 CPU (up to 1.8GHz)
+
−
** GPU: Mali-G610 MP4, compatible with OpenGLES 1.1, 2.0, and 3.2, OpenCL up to 2.2 and Vulkan1.2
+
−
** VPU: 8K@60fps H.265 and VP9 decoder, 8K@30fps H.264 decoder, 4K@60fps AV1 decoder, 8K@30fps H.264 and H.265 encoder
+
−
** NPU: 6TOPs, supports INT4/INT8/INT16/FP16
+
−
* RAM: 64-bit 4GB/8GB/16GB LPDDR4X at 2133MHz
+
−
* eMMC Flash: 32GB/64GB/256GB eMMC, at HS400 mode
+
−
* Nor Flash: 32MB SPI Nor Flash
+
−
* microSD: support up to SDR104 mode
+
−
* Ethernet: 2 x PCIe 2.5G Ethernet
+
−
* 1 x USB 3.0 Type-A,
+
−
* 1 x Full function USB Type‑C™ port, support DP display up to 4Kp60, USB 3.0
+
−
* 2 x USB 2.0 Type-A
+
−
* Video input:
+
−
** 1 x Standard HDMI input port, up to 4Kp60
+
−
** 2 x 4-lane MIPI-CSI, compatible with MIPI V1.2
+
−
* Video output:
+
−
** 2 x Standard HDMI output ports
+
−
*** compatible with HDMI2.1, HDMI2.0, and HDMI1.4 operation
+
−
*** one support displays up to 7680x4320@60Hz, another one support up to 4Kp60
+
−
*** Support RGB/YUV(up to 10bit) format
+
−
** 2 x 4-lane MIPI-DSI, compatible with MIPI DPHY 2.0 or CPHY 1.1
+
−
* Audio:
+
−
** 1 x 3.5mm jack for stereo headphone output
+
−
** 1 x 2.0mm PH-2A connector for analog microphone input
+
−
* GPIO:
+
−
** 40-pin 2.54mm header connector
+
−
** up to 2 x SPIs, 6 x UARTs, 1 x I2Cs, 8 x PWMs, 2 x I2Ss, 28 x GPIOs
+
−
* M.2 Connectors
+
−
** one M.2 M-Key connector with PCIe 3.0 x4 for NVMe SSDs up to 2,500 MB/s
+
−
** one M.2 E-key connector with PCIe 2.1 x1 and USB2.0 Host
+
−
* others:
+
−
** 10 Pin 2.54mm header connector including Debug UART(3.3V TTL) and 2 x USB 2.0 Host
+
−
** 2 Pin 1.27/1.25mm RTC battery input connector for low power RTC IC HYM8563TS
+
−
** one 38Khz IR receiver
+
−
** MASK button for eMMC update, reset button, and Power button
+
−
** one 5V Fan connector
+
−
** USB-C to Debug UART
+
−
** 2 x GPIO Controlled LED (SYS, LED1)
+
−
* Power supply: 5.5*2.1mm DC Jack & 2-Pin 3.5mm pitch connector, 12VDC input.
+
−
* PCB: 8 Layer, 110x80x1.6mm
+
−
*Ambient Operating Temperature: 0℃ to 70℃
+
−
 
+
−
==Diagram, Layout and Dimension==
+
−
===NanoPC-T6-LTS===
+
−
[[File:NanoPC-T6LTS_Layout-L.jpg|1100px]]
+
−
===NanoPC-T6===
+
−
[[File:NanoPC-T6 Layout-L.jpg|1100px]]
+
−
===Layout===
+
−
<!-- [[File:NanoPC-T6_Layout.jpg|thumb|frameless|300px|NanoPC-T6 Layout]] -->
+
−
* '''40-pin GPIO'''
+
−
::{| class="wikitable"
+
−
|-
+
−
|'''Pin#'''            || '''GPIO'''  || '''SPI'''    || '''UART'''  || '''I2C'''  || '''I2S'''  || '''PWM''' ||'''POWER'''      ||'''Description'''
+
−
|-
+
−
|1,17                  ||            ||              ||            ||            ||            ||          ||  VCC3V3_SYS_S3 || 3.3V Power Output, 500mA Max
+
−
|-
+
−
|2,4                  ||            ||              ||            ||            ||            ||          ||  VCC_5V0        || 5V Power Output, 500mA Max
+
−
|-
+
−
|6,9,14,20,25,30,34,39 ||            ||              ||            ||            ||            ||          ||  GND            || Power and Signal Ground
+
−
|-
+
−
|3                    ||  GPIO1_D7  ||              ||            || I2C8_SDA_M2 ||            ||          ||                  || pulled up to 3.3V with 2.2K on T6
+
−
|- 
+
−
|5                    ||  GPIO1_D6  ||              ||            || I2C8_SCL_M2 ||            ||          ||                  || pulled up to 3.3V with 2.2K on T6
+
−
|-
+
−
|7                    ||  GPIO3_B2  ||              ||            ||            || I2S2_SDI_M1||          ||                  || 3.3V
+
−
|-
+
−
|8                    ||  GPIO0_C5  ||              || UART0_TX_M0 ||            ||            ||  PWM4_M0  ||                  ||  3.3V     
+
−
|-
+
−
|10                    ||  GPIO0_C4  ||              || UART0_RX_M0 ||            ||            ||          ||                  ||  3.3V
+
−
|-
+
−
|11                    || GPIO3_C2    ||              ||            ||            ||            || PWM14_M0  ||                  ||  3.3V
+
−
|-
+
−
|12                    || GPIO3_B7    ||              ||            ||            ||            ||          ||                  ||  3.3V
+
−
|- 
+
−
|13                    || GPIO3_C3    ||              ||            ||            ||            ||PWM15_IR_M0||                  ||  3.3V
+
−
|-
+
−
|15                    || GPIO1_A7    ||              ||            ||            ||            ||          ||                  ||  3.3V
+
−
|-
+
−
|16                    || GPIO3_B3    ||              ||            ||            || I2S2_SDO_M1 ||          ||                ||  3.3V
+
−
|-
+
−
|18                    || GPIO3_B4    ||              ||            ||            || I2S2_MCLK_M1||          ||                ||  3.3V
+
−
|-
+
−
|19                    || GPIO1_B2    || SPI0_MOSI_M2  || UART4_RX_M2 ||            ||            ||          ||                  ||  3.3V
+
−
|-
+
−
|21                    || GPIO1_B1    || SPI0_MISO_M2  ||            ||            ||            ||          ||                  ||  3.3V
+
−
|-
+
−
|22                    || GPIO1_B5    || SPI0_CS1_M0  || UART7_TX_M2 ||            ||            ||          ||                  ||  3.3V
+
−
|-
+
−
|23                    || GPIO1_B3    || SPI0_CLK_M2  ||  UART4_TX_M2 ||            ||            ||          ||                  ||  3.3V
+
−
|-
+
−
|24                    || GPIO1_B4    || SPI0_CS0_M2  || UART7_RX_M2  ||            ||            ||          ||                  ||  3.3V
+
−
|-
+
−
|26                    || GPIO1_B0    ||              ||            ||            ||            ||          ||                  ||  3.3V
+
−
|-
+
−
|27                    || GPIO1_A0    ||              || UART6_RX_M1 ||            ||            ||          ||                  ||  3.3V
+
−
|-
+
−
|28                    || GPIO1_A1    ||              || UART6_TX_M1 ||            ||            ||          ||                  ||  3.3V
+
−
|-
+
−
|29                    || GPIO3_B5    ||              || UART3_TX_M1 ||            || I2S2_SCLK_M1 || PWM12_M0 ||                  ||  3.3V
+
−
|-
+
−
|31                    || GPIO3_B6    ||              || UART3_RX_M1 ||            || I2S2_LRCK_M1  ||  PWM13_M0 ||                  ||  3.3V
+
−
|-
+
−
|32                    || GPIO0_C6    ||              ||            ||            ||              || PWM5_M1  ||                  ||  3.3V
+
−
|-
+
−
|33                    || GPIO3_B0    ||              ||            ||            ||              || PWM9_M0  ||                  ||  3.3V
+
−
|-
+
−
|35                    || GPIO3_A0    || SPI4_MISO_M1  ||            ||            ||  I2S3_MCLK  || PWM10_M0  ||                  ||  3.3V
+
−
|-
+
−
|36                    || GPIO3_A3    || SPI4_CS0_M1  || UART8_RX_M1  ||            ||  I2S3_SDO    ||            ||                  || 3.3V
+
−
|-
+
−
|37                    || GPIO3_A4    || SPI4_CS1_M1  ||              ||            ||  I2S3_SDI    ||            ||                  || 3.3V
+
−
|-
+
−
|38                    || GPIO3_A1    || SPI4_MOSI_M1    ||            ||            ||  I2S3_SCLK    ||            ||                  || 3.3V
+
−
|-
+
−
|40                    || GPIO3_A2    || SPI4_CLK_M1  ||  UART8_TX_M1  ||            ||  I2S3_LRCK    ||            ||                  || 3.3V
+
−
|}
+
−
* '''MIPI-DSI'''
+
−
:: 0.5mm FPC Connector
+
−
::{| class="wikitable"
+
−
|-
+
−
|'''Pin#''' ||  '''MIPI-DSI0'''  ||  '''MIPI-DSI1'''  ||  '''Description ''' 
+
−
|-
+
−
|1,2,3      ||  VCC_5V0          || VCC_5V0            ||  5V Power ouput
+
−
|-
+
−
|4,7,9,11,15,18,21,24,27,30||GND  ||  GND              ||  Power and Signal Ground
+
−
|-
+
−
|5          || I2C5_SDA_M0        ||  I2C4_SDA_M3      ||  3.3V, I2C Data, pulled up to 3.3V with 2.2K on T6
+
−
|-
+
−
|6          || I2C5_SCL_M0        ||  I2C4_SCL_M3      ||  3.3V, I2C Clock, pulled up to 3.3V with 2.2K on T6
+
−
|-
+
−
|8          || GPIO3_C0          ||  GPIO4_A0        ||  3.3V, GPIO
+
−
|-
+
−
|10        || GPIO3_B1/PWM2_M1  ||  GPIO3_D5/PWM11_M3 ||  3.3V, GPIO/PWM
+
−
|-
+
−
|12        || GPIO3_A6          ||  GPIO4_A3          ||  3.3V, GPIO
+
−
|-
+
−
|13        || /NC                ||  /NC              ||  No Connection
+
−
|-
+
−
|14        || GPIO3_C1          || GPIO4_A1          ||  3.3V, GPIO
+
−
|-
+
−
|16        || MIPI_DPHY0_TX_D3N  || MIPI_DPHY1_TX_D3N  ||  MIPI TX Lane3 ouput N
+
−
|-
+
−
|17        || MIPI_DPHY0_TX_D3P  || MIPI_DPHY1_TX_D3P  ||  MIPI TX Lane3 ouput P
+
−
|-
+
−
|19        || MIPI_DPHY0_TX_D2N  || MIPI_DPHY1_TX_D2N  ||  MIPI TX Lane2 ouput N
+
−
|-
+
−
|20        || MIPI_DPHY0_TX_D2P  || MIPI_DPHY1_TX_D2P  ||  MIPI TX Lane2 ouput P
+
−
|-
+
−
|22        || MIPI_DPHY0_TX_D1N  || MIPI_DPHY1_TX_D1N  ||  MIPI TX Lane1 ouput N
+
−
|-
+
−
|23        || MIPI_DPHY0_TX_D1P  || MIPI_DPHY1_TX_D1P  ||  MIPI TX Lane1 ouput P
+
−
|-
+
−
|25        || MIPI_DPHY0_TX_D0N  || MIPI_DPHY1_TX_D0N  ||  MIPI TX Lane0 ouput N
+
−
|-
+
−
|26        || MIPI_DPHY0_TX_D0P  || MIPI_DPHY1_TX_D0P  ||  MIPI TX Lane0 ouput P
+
−
|-
+
−
|28        || MIPI_DPHY0_TX_CLKN || MIPI_DPHY1_TX_CLKN ||  MIPI TX Clock ouput N
+
−
|-
+
−
|29        || MIPI_DPHY0_TX_CLKP || MIPI_DPHY1_TX_CLKP ||  MIPI TX Clock ouput P
+
−
|}
+
−
* '''MIPI-CSI'''
+
−
:: 0.5mm FPC Connector
+
−
::{| class="wikitable"
+
−
|-
+
−
|'''Pin#''' ||  '''MIPI-CSI0'''  ||  '''MIPI-CSI1'''  ||  '''Description ''' 
+
−
|-
+
−
|1,2        ||  VCC_5V0          || VCC_5V0            ||  5V Power ouput
+
−
|-
+
−
|3,13,15,18,21,24,27,30          || GND  ||  GND      ||  Power and Signal Ground
+
−
|-
+
−
|4,5,7      || /NC                || /NC                ||  No Connection
+
−
|-
+
−
|6          || VCC_1V8_S3        || VCC_1V8_S3        ||  1.8V Power ouput, 100mA Max
+
−
|-
+
−
|8          || VSYNC_MASTER      || VSYNC_SLAVE        ||  Have been Connected together on T6 for sensor synchronization
+
−
|-
+
−
|9          || I2C3_SCL_M0        ||  I2C7_SCL_M0      ||  1.8V, I2C Clock, pulled up to 1.8V with 2.2K on T6
+
−
|-
+
−
|10        || I2C3_SDA_M0        ||  I2C7_SDA_M0      ||  1.8V, I2C Data, pulled up to 1.8V with 2.2K on T6
+
−
|-
+
−
|11        ||  GPIO4_C4          ||  GPIO2_C1        ||  1.8V, GPIO
+
−
|-
+
−
|12        || GPIO4_C5          ||  GPIO2_C2          ||  1.8V, GPIO
+
−
|-
+
−
|14        || MIPI_CAM1_CLKOUT  ||  MIPI_CAM2_CLKOUT  ||  1.8V, CLock ouput for Sensor
+
−
|-
+
−
|16        || MIPI_CSI0_RX_D3P  ||  MIPI_CSI1_RX_D3P  ||  MIPI RX Lane3 iuput P
+
−
|-
+
−
|17        || MIPI_CSI0_RX_D3N  ||  MIPI_CSI1_RX_D3N  ||  MIPI RX Lane3 iuput N
+
−
|-
+
−
|19        || MIPI_CSI0_RX_D2P  ||  MIPI_CSI1_RX_D2P  ||  MIPI RX Lane2 iuput P
+
−
|-
+
−
|20        || MIPI_CSI0_RX_D2P  ||  MIPI_CSI1_RX_D2N  ||  MIPI RX Lane2 iuput N
+
−
|-
+
−
|22        || MIPI_CSI0_RX_D1P  ||  MIPI_CSI1_RX_D1P  ||  MIPI RX Lane1 iuput P
+
−
|-
+
−
|23        || MIPI_CSI0_RX_D1N  || MIPI_CSI1_RX_D1N  ||  MIPI RX Lane1 iuput N
+
−
|-
+
−
|25        || MIPI_CSI0_RX_CLK0P || MIPI_CSI1_RX_CLK0P ||  MIPI RX Clock iuput P
+
−
|-
+
−
|26        || MIPI_CSI0_RX_CLK0N || MIPI_CSI1_RX_CLK0N ||  MIPI RX Clock iuput N
+
−
|-
+
−
|28        || MIPI_CSI0_RX_D0P  || MIPI_CSI1_RX_D0P  ||  MIPI RX Lane0 iuput P
+
−
|-
+
−
|29        || MIPI_CSI0_RX_D0N  || MIPI_CSI1_RX_D0N  ||  MIPI RX Lane0 iuput N
+
−
|}
+
−
 
+
−
* '''10 Pin Debug UART & USB 2.0 Header'''
+
−
:: Debug UART is 3.3V level signals, 1500000bps
+
−
::{| class="wikitable"
+
−
|-
+
−
|'''Pin#''' ||'''Assignment'''  ||  '''Description '''    ||'''Pin#''' ||'''Assignment'''  ||  '''Description '''
+
−
|-
+
−
|1          ||  USB 5V          ||  5V Power Output(1A Max) ||  2        ||    USB 5V        ||  5V Power Output(1A Max)
+
−
|-
+
−
|3          || USB_HS2_DM        ||  USB 2.0 Host DM        ||  4        ||  USB_HS3_DM      ||  USB 2.0 Host DM
+
−
|-
+
−
|5          || USB_HS2_DP        ||  USB 2.0 Host DP        ||  6        ||  USB_HS3_DP      ||  USB 2.0 Host DP 
+
−
|-
+
−
|7          || GND              ||  0V                      ||  8        ||  GND              ||  0V
+
−
|-
+
−
|9          || UART2_TX_M0_DEBUG ||  Debug UART TX          ||  10      || UART2_RX_M0_DEBUG || Debug UART RX
+
−
|}
+
−
 
+
−
*'''About Power'''
+
−
** Power supply via 5.5*2.1mm DC Jack. 5V~20V, 12V is recommended.
+
−
**Power Output Capacity
+
−
::{| class="wikitable"
+
−
|-
+
−
|'''Port''' ||'''Max Output'''      ||  '''Port'''  || '''Max Output'''
+
−
|-
+
−
|USB-A 3.0  || 5V/2A                || USB-C/DP      || 5V/2A
+
−
|-
+
−
|M.2 M-Key  || 3.3V/3A              ||  M.2 E-Key    || 3.3V/3A
+
−
|-
+
−
|MIPI-CSI0  || 5V/0.5A              || MIPI-CSI1    || 5V/0.5A
+
−
|-
+
−
|MIPI-DSI0  || 5V/1A                || MIPI-DSI1    || 5V/1A
+
−
|-
+
−
|40 Pin GPIO|| 5V/0.5A, 3.3V/0.5A  || 10 Pin USB2.0 || 5V/2A
+
−
|-
+
−
|USB-A 2.0  || 5V/2A                || '''Total'''        || '''35W'''
+
−
|}
+
−
 
+
−
* '''Debug UART Pin Spec (On the old T6 2301)'''
+
−
:: 3.3V level signals, 1500000bps
+
−
::{| class="wikitable"
+
−
|-
+
−
|'''Pin#''' ||'''Assignment''' ||  '''Description ''' 
+
−
|-
+
−
|1    || GND                    || 0V
+
−
|-
+
−
|2  || UART2_TX_M0_DEBUG        || output
+
−
|-
+
−
|3  || UART2_RX_M0_DEBUG        || intput
+
−
|}
+
−
*'''About Power (For the old T6 2301)'''
+
−
** Power supply via 5.5*2.1mm DC Jack. 5V~20V, 12V is recommended.
+
−
**Power Output Capacity
+
−
::{| class="wikitable"
+
−
|-
+
−
|'''Port''' ||'''Max Output'''      ||  '''Port'''  || '''Max Output'''
+
−
|-
+
−
|USB-A 3.0  || 5V/2A                || USB-C/DP      || 5V/2A
+
−
|-
+
−
|M.2 M-Key  || 3.3V/3A              ||  M.2 E-Key    || 3.3V/3A
+
−
|-
+
−
|MIPI-CSI0  || 5V/0.5A              || MIPI-CSI1    || 5V/0.5A
+
−
|-
+
−
|MIPI-DSI0  || 5V/1A                || MIPI-DSI1    || 5V/1A
+
−
|-
+
−
|GPIO      || 5V/0.5A, 3.3V/0.5A  || miniPCIe  || 3.3V/3A
+
−
|-
+
−
| Total    || 35W
+
−
|}
+
−
 
+
−
 
+
−
*'''RTC'''
+
−
::RTC backup current is 0.25μA TYP (VDD =3.0V, TA =25℃).
+
−
::Connector P/N: Molex 53398-0271
+
−
[[File:T6-rtc.png|350px]]
+
−
 
+
−
*'''IR receiver'''
+
−
::Connected to PWM3_IR_M0
+
−
::38Khz carrier frequency
+
−
::compatible with NEC protocol, User code is 3B4C
+
−
::Support FriendlyELEC RC100 IR controller
+
−
 
+
−
==Get Started==
+
−
===Essentials You Need===
+
−
Before starting to use your NanoPC-T6 get the following items ready
+
−
* NanoPC-T6
+
−
* MicroSD Card/TF Card: Class 10 or Above, minimum 8GB SDHC
+
−
* A DC 12V/2A power
+
−
* If you need to develop and compile,you need a computer that can connect to the Internet. It is recommended to install Ubuntu 20.04 64-bit system and use the following script to initialize the development environment, or use docker container: <br />
+
−
**[https://github.com/friendlyarm/build-env-on-ubuntu-bionic How to setup the Compiling Environment on Ubuntu bionic]<br />
+
−
**[https://github.com/friendlyarm/docker-cross-compiler-novnc docker-cross-compiler-novnc]<br />
+
−
===TF Cards We Tested===
+
−
Refer to： [[Template:TFCardsWeTested/zh|TFCardsWeTested]]
+
−
{{1500000SerialPortDebugSetting}}
+
−
===Install OS===
+
−
{{Downloads-RK3588|NanoPC-T6}}
+
−
{{BurnLinuxToSD-Rockchip|NanoPC-T6}}
+
−
{{BurnLinuxToEMMC-Rockchip|NanoPC-T6}}
+
−
{{RockchipBootPriority|NanoPC-T6}}
+
−
{{FriendlyWrt21|NanoPC-T6}}
+
−
==Work with Ubuntu 22.04 (Jammy) Desktop==
+
−
===Introduction to Ubuntu 22.04 Desktop===
+
−
{{UbuntuJammyDesktop-Intro|NanoPC-T6}}
+
−
{{UbuntuJammyDesktop-Common|NanoPC-T6}}
+
−
{{UbuntuJammyDesktop-WithHDMI|NanoPC-T6}}
+
−
{{Android12|NanoPC-T6}}
+
−
==Work with Debian11 Desktop==
+
−
===Introduction to Debian11 Desktop===
+
−
{{DebianBullseyeDesktop-XFCE-Intro|NanoPC-T6}}
+
−
{{DebianBullseyeDesktop-XFCE-Common|NanoPC-T6}}
+
−
{{DebianBullseyeDesktop-XFCE-WithHDMI|NanoPC-T6}}
+
−
{{DebianBullseyeDesktop-XFCE-HDMIIN|NanoPC-T6}}
+
−
==Work with Debian10 Desktop==
+
−
* Refer to：
+
−
** [[Debian Buster Desktop|Debian Buster]]
+
−
==Work with Ubuntu 20.04 (Focal) Desktop==
+
−
===Introduction to Ubuntu 20.04 Desktop===
+
−
{{UbuntuFocalDesktop-Intro|NanoPC-T6}}
+
−
{{UbuntuFocalDesktop-Common|NanoPC-T6}}
+
−
{{OfficialUbuntuCore|NanoPC-T6}}
+
−
{{FriendlyCoreRemoveQt}}
+
−
==How to Compile==
+
−
{{Rockchip-DevEnv|NanoPC-T6}}
+
−
{{RK3588-BuildFromSource|NanoPC-T6}}
+
−
{{RK3588-HWAccess|NanoPC-T6}}
+
−
{{RockchipMiscCustome|RK3588}}
+
−
{{RockchipCommonLinuxTips|NanoPC-T6}}
+
−
{{Template:How to Initialize and Format New SSD And HDD|NanoPC-T6}}
+
−
==Link to Rockchip Resources==
+
−
{{LinkToRockchipResources|NanoPC-T6}}
+
−
==Schematic, PCB CAD File==
+
−
*NanoPC-T6 2301 Schematic: https://wiki.friendlyelec.com/wiki/images/9/97/NanoPC-T6_2301_SCH.PDF
+
−
*NanoPC-T6 LTS 2310 Schematic: https://wiki.friendlyelec.com/wiki/images/4/44/NanoPC-T6_LTS_2310_SCH.pdf
+
−
*NanoPC-T6 2301 PCB CAD File：https://wiki.friendlyelec.com/wiki/images/9/90/NanoPC-T6_2301_DXF.zip
+
−
*NanoPC-T6 LTS 2310 PCB CAD File: https://wiki.friendlyelec.com/wiki/images/0/08/NanoPC-T6_LTS_2310_DXF.zip
+
−
 
+
−
==Update Logs==
+
−
{{RK3588-UpdateLog|NanoPC-T6}}
+

Latest revision as of 09:58, 29 October 2024

1 安装系统到M.2或USB硬盘

可以通过使用TF卡启动eFlasher系统，将引导和系统分别安装到不同存储设备，但是由于CPU不支持直接从M.2和USB设备引导，所以虽然系统可以安装到M.2和USB设备，但是引导仍然需要安装到eMMC或者TF卡。
操作步骤如下：

  • 准备一张32G或以上容量的TF卡;
  • 访问此处的下载地址下载文件名为XXXX-eflasher-multiple-os-YYYYMMDD-30g.img.gz的固件(位于"01_系统固件/02_SD卡刷机固件(SD-to-eMMC)"目录);
  • 将固件写入TF卡，在NanoPC-T4上连接好存储设备，插入TF卡上电开机，接下来要在界面上操作，如果没有显示设备，可以使用VNC代替，请参考使用VNC操作eFlasher;
  • 在eFlasher界面上，首先选择要安装的OS，然后选择引导安装的目的地 (通常选eMMC)，以及选择系统安装的目的地（可以选eMMC,M.2硬盘,USB存储设备等），如下图所示：

Eflasher-select-boot-and-system-device.png

  • 没有eMMC时可使用TF卡作为引导，方法是将另一个TF卡通过USB读卡器插入USB端口，然后选择USB设备作为引导安装目的地，从而实现从TF卡引导，但系统存放在M.2或USB硬盘的目的;
  • 烧写完成后，从NanoPC-T4弹出SD卡，引导在eMMC的情况下，NanoPC-T4会自动重启至你刚刚烧写的系统，如果引导安装在TF卡，则需要拨掉电源，插入TF引导卡再上电开机;
  • 更详细的安装指南请参考此处;

2 Installing the System to M.2 or USB Drive

You can use a TF card to boot the eFlasher system, allowing the boot and system to be installed on different storage devices. However, since the CPU doesn’t support booting directly from M.2 and USB devices, the system can be installed on M.2 and USB devices, but the boot must still be installed on eMMC or a TF card.
Steps are as follows:

  • Prepare a TF card with a capacity of 32GB or larger.
  • Visit [the download link here](http://download.friendlyelec.com/APITestPage) to download the firmware file named XXXX-eflasher-multiple-os-YYYYMMDD-30g.img.gz (located in the “01_Official images/02_SD-to-eMMC images” directory).
  • Flash the firmware to the TF card, connect the storage device you intend to use on NanoPC-T4, insert the TF card and power on, we need to perform the operations in the eFlasher GUI. If your NanoPC-T4 does not have a display interface, you can use VNC; refer to Using VNC to Operate eFlasher.
  • In the eFlasher GUI, select the OS to install, and in the OS settings interface, choose the destination for boot installation (typically eMMC), then choose the destination for system installation (options include eMMC, M.2 hard drive, USB storage, etc.), as shown below:

Eflasher-select-boot-and-system-device.png

  • If no eMMC is available, the TF card can serve as the boot by inserting another TF card into the USB port via a USB card reader and selecting it as the boot destination, enabling booting from the TF card with the system stored on the M.2 or USB drive.
  • After flashing, eject the SD card from NanoPC-T4. If booting from eMMC, NanoPC-T4 will automatically restart into the newly flashed system. If boot installation is on a TF card, power off, insert the boot TF card, and power on again.
  • For a more detailed installation guide, please refer to this link.
Retrieved from "https://wiki.friendlyelec.com/wiki/index.php?title=APITestPage&oldid=26502"