Difference between revisions of "APITestPage"

From FriendlyELEC WiKi
Jump to: navigation, search
(updated by API)
(updated by API)
 
(89 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
[[NanoPC-T4/zh|查看中文]]
 
  
−
==Introduction==
+
{{BurnLinuxToExtDrive-Rockchip/zh|NanoPC-T4}}
−
[[File:NanoPC-T4-01B.jpg|thumb|Overview]]
+
{{BurnLinuxToExtDrive-Rockchip|NanoPC-T4}}
−
[[File:NanoPC-T4-A01.jpg|thumb|Front]]
+
−
[[File:NanoPC-T4-B01.jpg|thumb|Back]]
+
−
* The NanoPC-T4 is by far the smallest RK3399 based high-performance ARM board with popular ports and interfaces. Its software is fully open source. It is as small as 100 x 64 mm. It has 4GB LPDDR3 RAM, 16GB eMMC flash, onboard 2.4G & 5G dual-band WiFi module and a full standard M.2 PCIe interface which supports an NVME SSD high-speed hard drive. The NanoPC-T4 supports GPU and VPU acceleration and works with Android 7.1 and Lubuntu Desktop.
+
−
 
+
−
* The NanoPC-T4 has a MIPI-CSI dual camera interface, a MIPI-DSI and an eDP display interfaces, and an HDMI 2.0 interface. It has Type-C/DP, USB 3.0, USB2.0, MicroSD, Gbps Ethernet port, 3.5mm audio jack, infrared receiver, AD input, serial debug interface and a 40Pin RPi compatible connector.
+
−
 
+
−
* The RK3399 SoC has an internal Mali-T860 GPU which has powerful capabilities of processing 3D and HD H.265/H2.64 video streams. It supports dual camera inputs, dual ISP interface capable of doing image processing up to 13MPix/s. The NanoPC-T4 is a perfect platform for AI and deep learning applications. It can be widely used in advertisement machines, game machines, video conference applications, surveillance systems, clusters, VR/AR applications, machine vision applications and etc.
+
−
 
+
−
==Hardware Spec==
+
−
* SoC: Rockchip RK3399
+
−
** CPU: big.LITTLE，Dual-Core Cortex-A72(up to 2.0GHz) + Quad-Core Cortex-A53(up to 1.5GHz)
+
−
** GPU: Mali-T864 GPU，supports OpenGL ES1.1/2.0/3.0/3.1, OpenCL, DX11, and AFBC
+
−
** VPU: 4K VP9 and 4K 10bits H265/H264 60fps decoding, Dual VOP, etc
+
−
* PMU: RK808-D PMIC, cooperated with independent DC/DC, enabling DVFS, sofeware power-down, RTC wake-up, system sleep mode
+
−
* RAM: Dual-Channel 4GB LPDDR3-1866
+
−
* Flash: 16GB eMMC 5.1 Flash
+
−
* Ethernet: Native Gigabit Ethernet
+
−
* Wi-Fi/BT: 802.11a/b/g/n/ac, Bluetooth 4.1, Wi-Fi and Bluetooth combo module, 2x2 MIMO, dual antenna interface
+
−
* Video Input: one or two 4-Lane MIPI-CSI, dual ISP, up to 13MPix/s，supports simultaneous input of dual camera data
+
−
* Video output
+
−
** HDMI: HDMI 2.0a, supports 4K@60Hz，HDCP 1.4/2.2
+
−
** DP on Type-C: DisplayPort 1.2 Alt Mode on USB Type-C
+
−
** LCD Interface: one eDP 1.3（4-Lane，10.8Gbps）, one or two 4-Lane MIPI-DSI
+
−
* Audio Out: 3.5mm Dual channel headphone jack, or HDMI
+
−
* Audio In: 2-Pin 2.54mm microphone interface
+
−
* USB 2.0: 2 independent native USB 2.0 Host A interfaces
+
−
* USB 3.0: 1 native USB 3.0 Host A type interface
+
−
* USB Type-C: Supports USB3.0 Type-C and DisplayPort 1.2 Alt Mode on USB Type-C
+
−
* PCIe: One M.2 M-Key PCIe x4 socket, compatible with PCIe 2.1, Dual operation mode; Onboard M3 PCB nut for mounting M.2 2280 module
+
−
* microSD Slot x 1
+
−
* 40Pin GPIO Extension ports:
+
−
** 3 X 3V/1.8V I2C, up to 1 x 3V UART, 1 X 3V SPI, 1 x SPDIF_TX, up to 8 x 3V GPIOs
+
−
** 1 x 1.8V I2S, 3 x 1.8V GPIOs
+
−
* ADC: 3 x 1.8V ADC inputs, 5 Pin 2.54mm header
+
−
* Debug: one Debug UART, 4 Pin 2.54mm header, 3V level, 1500000bps
+
−
* Keys: PowerKey, Reset, MASKROM(BOOT), Recovery
+
−
* LED: 1 x power LED and 1 x GPIO Controlled LED
+
−
* IR reciver: Onboard IR reciver, Acceptes 38KHz carrier frequency
+
−
* RTC Battery: 2 Pin 1.27/1.25mm RTC battery input connector
+
−
* Cooling: two 2.5mm PCB nuts for mounting heat sink; 3 Pin 12V cooling fan interface with PWM
+
−
* Power supply: DC 12V/2A
+
−
* PCB: Ten Layer, 100 mm x 64 mm
+
−
*Ambient Operating Temperature: -20℃ to 70℃
+
−
 
+
−
==Software Features==
+
−
 
+
−
==Diagram, Layout and Dimension==
+
−
===Layout===
+
−
[[File:NanoPC-T4-1902-IF-01.jpg |thumb|600px|NanoPC-T4 Layout]]
+
−
* '''40 Pin GPIO Pin Spec'''
+
−
::{| class="wikitable"
+
−
|-
+
−
|'''Pin#''' || '''Assignment'''          ||'''Pin#'''  || '''Assignment'''   
+
−
|-
+
−
|1    || VCC3V3_SYS  ||2    || VCC5V0_SYS
+
−
|-
+
−
|3    || I2C2_SDA(3V)      ||4    || VCC5V0_SYS
+
−
|-
+
−
|5    || I2C2_SCL(3V)      ||6    || GND
+
−
|-
+
−
|7    || GPIO1_A0(3V)      ||8    || GPIO4_C1/I2C3_SCL(3V)
+
−
|-
+
−
|9    || GND          ||10    || GPIO4_C0/I2C3_SDA(3V)
+
−
|-
+
−
|11  || GPIO1_A1(3V)      ||12    || GPIO1_C2(3V)
+
−
|-
+
−
|13  || GPIO1_A3(3V)      ||14    || GND
+
−
|-
+
−
|15  || GPIO1_A4(3V)      ||16    || GPIO1_C6(3V)
+
−
|-
+
−
|17  || VCC3V3_SYS ||18    || GPIO1_C7(3V)
+
−
|-
+
−
|19  || SPI1_TXD/UART4_TX(3V)    ||20    || GND
+
−
|-
+
−
|21  || SPI1_RXD/UART4_RX(3V)    ||22    || GPIO1_D0(3V)
+
−
|-
+
−
|23  || SPI1_CLK(3V)    ||24    || SPI1_CSn0(3V)
+
−
|-
+
−
|25  || GND          ||26    || GPIO4_C5/SPDIF_TX(3V)
+
−
|-
+
−
|27  || I2C2_SDA(1.8V)      ||28    || I2C2_SCL(1.8V)
+
−
|-
+
−
|29  || I2S1_LRCK_RX(1.8V)      ||30    || GND
+
−
|-
+
−
|31  ||I2S1_LRCK_TX(1.8V)    ||32    || I2S_CLK(1.8V)
+
−
|-
+
−
|33  || I2S1_SCLK(1.8V)      ||34    || GND
+
−
|-
+
−
|35  || I2S1_SDI0(1.8V)    ||36    || I2S1_SDO0(1.8V)
+
−
|-
+
−
|37  || GPIO3_D4(1.8V)    ||38    || GPIO3_D5(1.8V)
+
−
|-
+
−
|39  || GND          ||40    || GPIO3_D6(1.8V)
+
−
|}
+
−
 
+
−
* '''eDP Interface Pin Spec'''
+
−
:: Connector P/N: I-PEX-20455-030E
+
−
::{| class="wikitable"
+
−
|-
+
−
|'''Pin#''' || '''Assignment'''      || '''Description'''   
+
−
|-
+
−
|1    || GND        || Signal ground
+
−
|-
+
−
|2    || EDP_TX3N  || eDP data lane 3 negative output
+
−
|-
+
−
|3    || EDP_TX3P  || eDP data lane 3 positive output 
+
−
|-
+
−
|4    || GND        || Signal ground
+
−
|-
+
−
|5    || EDP_TX2N  || eDP data lane 2 negative output
+
−
|-
+
−
|6    || EDP_TX2P  || eDP data lane 2 positive output     
+
−
|-
+
−
|7    || GND        || Signal ground
+
−
|-
+
−
|8    || EDP_TX1N  || eDP data lane 1 negative output 
+
−
|-
+
−
|9    || EDP_TX1P  || eDP data lane 1 positive output     
+
−
|-
+
−
|10    || GND      || Signal ground
+
−
|-
+
−
|11    || EDP_TX0N  || eDP data lane 0 negative output 
+
−
|-
+
−
|12    || EDP_TX0P  || eDP data lane 0 positive output 
+
−
|-
+
−
|13    || GND      || Signal ground
+
−
|-
+
−
|14    || EDPAUXP  || eDP CH-AUX positive differential output
+
−
|-
+
−
|15    || EDPAUXN  || eDP CH-AUX negative differential output 
+
−
|-
+
−
|16    || GND      || Signal ground
+
−
|-
+
−
|17    || VCC3V3_SYS || 3.3V Power output for logic
+
−
|-
+
−
|18    || VCC3V3_SYS || 3.3V Power output for logic
+
−
|-
+
−
|19    || I2C4_SDA  || 3V I2C data signal, Connect to touch panel
+
−
|-
+
−
|20    || I2C4_SCL  || 3V I2C clock signal, Connect to touch panel
+
−
|-
+
−
|21    || GPIO1_C4_TP_INT ||  3V interrupt input, Connect to the interrupt output of touch panel
+
−
|-
+
−
|22    || GPIO1_B5_TP_RST ||  3V output for reseting touch panel, Connect to the reset input of touch panel 
+
−
|-
+
−
|23    || PWM0_BL        || 3V PWM output, for LCD backlight dimming. pull up to VCC3V3_SYS on LCD side.
+
−
|-
+
−
|24    || GPIO4_D5_LCD_BL_EN || 3V output for turning on/off the LCD backlight
+
−
|-
+
−
|25    || GND        || Backlight ground
+
−
|-
+
−
|26    || GND        || Backlight ground
+
−
|-
+
−
|27    || GND        || Backlight ground
+
−
|-
+
−
|28    || VCC12V0_SYS || 12V Power output for Backlight Power
+
−
|-
+
−
|29    || VCC12V0_SYS || 12V Power output for Backlight Power
+
−
|-
+
−
|30    || VCC12V0_SYS || 12V Power output for Backlight Power 
+
−
|}
+
−
* '''MIPI-DSI Interface Pin Spec'''
+
−
:: 0.5mm FPC connector
+
−
::{| class="wikitable"
+
−
|-
+
−
|'''Pin#''' || '''Assignment'''            || '''Description '''
+
−
|-
+
−
|1, 2, 3 || VCC5V0_SYS  || 5V power output
+
−
|-
+
−
|4|| GND                || Return current path
+
−
|-
+
−
|5 || I2C4_SDA          || 3V I2C data signal, Connect to touch panel
+
−
|-
+
−
|6  || I2C4_SCL        || 3V I2C clock signal, Connect to touch panel
+
−
|-
+
−
|7  || GND              || Return current path
+
−
|-
+
−
|8      || GPIO1_C4_TP_INT || 3V interrupt input, Connect to the interrupt output of touch panel 
+
−
|-
+
−
|9      || GND        || Return current path
+
−
|-   
+
−
|10      || PWM0_BL    || 3V PWM output, for LCD backlight dimming
+
−
|-
+
−
|11      || GND        || Return current path
+
−
|-
+
−
|12      || GPIO4_D5_LCD_BL_EN || 3V output for turning on/off the LCD backlight
+
−
|-
+
−
|13      || GPIO4_D6_LCD_RST_H  || 3V output for reseting the LCD module
+
−
|-
+
−
|14      || GPIO1_B5_TP_RST    || 3V output for reseting touch panel, Connect to the reset input of touch panel
+
−
|-
+
−
|15      || GND              || Return current path
+
−
|-
+
−
|16      || MIPI_TX0_D3N    || MIPI DSI negative differential data line transceiver output
+
−
|-
+
−
|17      || MIPI_TX0_D3P    || MIPI DSI positive differential data line transceiver output
+
−
|-
+
−
|18      || GND    ||  Return current path
+
−
|-
+
−
|19      || MIPI_TX0_D2N  || MIPI DSI negative differential data line transceiver output
+
−
|-
+
−
|20    || MIPI_TX0_D2P  || MIPI DSI positive differential data line transceiver output
+
−
|-
+
−
|21    || GND    ||  Return current path
+
−
|-
+
−
|22    || MIPI_TX0_D1N  || MIPI DSI negative differential data line transceiver output
+
−
|-
+
−
|23 || MIPI_TX0_D1P  || MIPI DSI positive differential data line transceiver output
+
−
|-
+
−
|24 || GND  ||  Return current path
+
−
|-
+
−
|25 || MIPI_TX0_D0N || MIPI DSI negative differential data line transceiver output
+
−
|-
+
−
|26 || MIPI_TX0_D0P  || MIPI DSI positive differential data line transceiver output
+
−
|-
+
−
|27 || GND    || Return current path
+
−
|-
+
−
|28 || MIPI_TX0_CLKN  || MIPI DSI negative differential clock line transceiver output
+
−
|-
+
−
|29 || MIPI_TX0_CLKP  || MIPI DSI positive differential clock line transceiver output
+
−
|-
+
−
|30 || GND    || Return current path
+
−
|}
+
−
* '''MIPI-CSI Interface Pin Spec'''
+
−
:: 0.5mm FPC Connector
+
−
:: MIPI-CSI2 can be configured to MIPI-DSI
+
−
::{| class="wikitable"
+
−
|-
+
−
|'''Pin#''' ||  '''MIPI-CSI1'''  ||  '''MIPI-CSI2'''  ||  '''Description ''' 
+
−
|-
+
−
|1    ||  VCC5V0_SYS  || VCC5V0_SYS  ||  5V Power ouput
+
−
|-
+
−
|2    ||  VCC5V0_SYS || VCC5V0_SYS    ||  5V Power ouput
+
−
|-
+
−
|3    ||    GND    ||  GND          ||  Return current path
+
−
|-
+
−
|4    || VCC_CSI_AF2.8V || VCC_CSI_AF2.8V || 2.8V Power for VCM
+
−
|-
+
−
|5    || VCC_CSI_1.2V  || VCC_CSI_1.2V  || 1.2V Power for image sensor core circuit
+
−
|-
+
−
|6    ||  VCC1V8_CAM  ||  VCC1V8_CAM  || 1.8V power for I/O circuit
+
−
|-
+
−
|7    ||  VCC_CSI_2.8V || VCC_CSI_2.8V || 2.8V power for image sensor analog circuit
+
−
|-
+
−
|8    ||  VCC_CSI_1.0V || VCC_CSI_1.0V || 1.0V Power for image sensor core circuit
+
−
|-
+
−
|9    || I2C1_SCL ||  I2C2_SCL        || 1.8V I2C clock signal
+
−
|-
+
−
|10    || I2C1_SDA || I2C2_SDA        ||  1.8V I2C data signal
+
−
|-
+
−
|11    || MIPI_CSI0_RST || MIPI_CSI1_RST || reset  camera module
+
−
|-
+
−
|12    || MIPI_CSI0_PWN || MIPI_CSI1_PWN  || Power down camera module
+
−
|-
+
−
|13    ||  GND          ||      GND          || Return current path
+
−
|-
+
−
|14    || GPIO2_B3_CIF_CLKOUTA || GPIO2_B3_CIF_CLKOUTA || MCLK to camera module
+
−
|-
+
−
|15      || GND          ||    GND            || Return current path
+
−
|-
+
−
|16    ||  MIPI_RX0_D3P  || MIPI_TX1/RX1_D3P  || MIPI CSI positive differential data line transceiver output
+
−
|-
+
−
|17    ||  MIPI_RX0_D3N || MIPI_TX1/RX1_D3N    || MIPI CSI negative differential data line transceiver output
+
−
|-
+
−
|18    ||  GND    || GND                      || Return current path
+
−
|-
+
−
|19    || MIPI_RX0_D2P || MIPI_TX1/RX1_D2P  || MIPI CSI positive differential data line transceiver output
+
−
|-
+
−
|20    || MIPI_RX0_D2N || MIPI_TX1/RX1_D2N    || MIPI CSI negative differential data line transceiver output
+
−
|-
+
−
|21    || GND || GND    || Return current path
+
−
|-
+
−
|22    ||  MIPI_RX0_D1P  || MIPI_TX1/RX1_D1P  || MIPI CSI positive differential data line transceiver output
+
−
|-
+
−
|23    || MIPI_RX0_D1N || MIPI_TX1/RX1_D1N    || MIPI CSI negative differential data line transceiver output
+
−
|-
+
−
|24    || GND || GND    || Return current path
+
−
|-
+
−
|25    || MIPI_RX0_CLKP || MIPI_TX1/RX1_CLKP  || MIPI CSI positive differential clock line transceiver output
+
−
|-
+
−
|26    || MIPI_RX0_CLKN || MIPI_TX1/RX1_CLKN    || MIPI CSI negative differential clock line transceiver output
+
−
|-
+
−
|27    || GND ||  GND  || Return current path
+
−
|-
+
−
|28    || MIPI_RX0_D0P || MIPI_TX1/RX1_D0P || MIPI CSI positive differential data line transceiver output
+
−
|-
+
−
|29    || MIPI_RX0_D0N || MIPI_TX1/RX1_D0N  || MIPI CSI negative differential data line transceiver output
+
−
|-
+
−
|30    || GND      ||  GND    || Return current path
+
−
|}
+
−
* '''M.2 PCIe Pin Spec'''
+
−
:: PCIe Gen 2.1 x4
+
−
:: M.2 Key M Connector for Socket 2/Socket 3 PCIe-based Module, such as PCIe SSD
+
−
:: Connector P/N: [https://www.amphenolcanada.com/ProductSearch/drawings/AC/MDTXXXXXX001.pdf MDT-420-M-01002]
+
−
::{| class="wikitable"
+
−
|-
+
−
|'''Pin#''' || '''Assignment'''  || '''Description'''                      ||'''Pin#'''  || '''Assignment'''      || '''Description'''
+
−
|-
+
−
|1          || GND              || Return current path                    ||  2        || VCC3V3_SYS            || 3.3V Power output     
+
−
|-
+
−
|3          || GND              || Return current path                    ||  4        || VCC3V3_SYS            || 3.3V Power output
+
−
|-
+
−
|5          || PCIE_RX3_N      || PCIe differential data input signals  ||  6        || N/C                  || no connection
+
−
|-
+
−
|7          || PCIE_RX3_P      || PCIe differential data input signals  ||    8      || N/C                  ||  no connection
+
−
|-
+
−
|9          || GND              || Return current path                    ||  10      ||  N/C                  ||  no connection
+
−
|-
+
−
|11        || PCIE_TX3N        || PCIe differential data output signals  ||  12      ||  VCC3V3_SYS          ||  3.3V Power output
+
−
|-
+
−
|13        || PCIE_TX3P        || PCIe differential data output signals    || 14      ||  VCC3V3_SYS          ||  3.3V Power output
+
−
|- 
+
−
|15        ||  GND            || Return current path                      || 16        ||  VCC3V3_SYS        ||  3.3V Power output
+
−
|-
+
−
|17        || PCIE_RX2_N      || PCIe differential data input signals      || 18      || VCC3V3_SYS          || 3.3V Power output
+
−
|-
+
−
|19        || PCIE_RX2_P      || PCIe differential data input signals      || 20      || N/C                  || no connection
+
−
|-
+
−
|21        ||  GND            ||  Return current path                  || 22      || N/C                  || no connection
+
−
|-
+
−
|23          ||  PCIE_TX2N    ||  PCIe differential data output signals    || 24      ||    N/C              ||  no connection
+
−
|-
+
−
|25          || PCIE_TX2P  ||  PCIe differential data output signals      ||    26    ||      N/C          || no connection
+
−
|-
+
−
|27        ||  GND          ||    Return current path                  ||  28    ||  N/C                || no connection       
+
−
|-
+
−
|29        || PCIE_RX1_N    ||      PCIe differential data input signals    || 30    ||  N/C                || no connection     
+
−
|-
+
−
|31        ||  PCIE_RX1_P  ||    PCIe differential data input signals      || 32    ||  N/C                || no connection     
+
−
|-
+
−
|33        ||  GND        ||    Return current path                    ||  34    ||  N/C                    || no connection     
+
−
|-
+
−
|35        ||  PCIE_TX1N    ||    PCIe differential data output signals    || 36    ||  N/C                || no connection     
+
−
|-
+
−
|37        ||  PCIE_TX1P  ||    PCIe differential data output signals    ||  38    || DEVSLP/NC            || internal pull up to VCC3V3_SYS with 10K
+
−
|-
+
−
|39        ||  GND        ||    Return current path                      ||  40    ||  I2C2_SCL              || 1.8V I2C clock signal
+
−
|-
+
−
|41        ||  PCIE_RX0_N    ||    PCIe differential data input signals  || 42    ||  I2C2_SDA            ||  1.8V I2C data signal
+
−
|-
+
−
|43        ||  PCIE_RX0_P  ||  PCIe differential data input signals      || 44    ||  GPIO2_A2_PCIE_ALERT#    ||  1.8V GPIO signal
+
−
|-
+
−
|45        ||  GND          ||  Return current path                        || 46    ||  N/C                    ||  no connection
+
−
|-
+
−
|47        ||  PCIE_TX0N  ||  PCIe differential data output signals    || 48    ||  N/C                  ||  no connection
+
−
|-
+
−
|49        ||  PCIE_TX0P  ||  PCIe differential data output signals      || 50    || GPIO2_A4_PCIE_RESET#    ||  1.8V GPIO signal
+
−
|-
+
−
|51        ||  GND          ||    Return current path                      || 52    ||  CLKREQ#/NC              ||  internal pull down to GND with 0R
+
−
|-
+
−
|53        || PCIE_REF_CLKN || differential reference clock out for PCIe peripheral      || 54    ||  GPIO2_A3_PCIE_WAKE#    ||  1.8V GPIO signal
+
−
|-
+
−
|55        || PCIE_REF_CLKP || differential reference clock out for PCIe peripheral    || 56    || N/C            ||  no connection
+
−
|-
+
−
|57        ||  GND          ||  Return current path                                  || 58    ||        N/C                ||  no connection
+
−
|-
+
−
|59        ||  Connector Key    || Connector Key                      || 60    ||  Connector Key          ||  Connector Key
+
−
|-
+
−
|60        ||  Connector Key  || Connector Key                              || 61    ||  Connector Key            ||  Connector Key
+
−
|-
+
−
|62        || Connector Key  || Connector Key                || 63    ||    Connector Key    ||  Connector Key
+
−
|-
+
−
|64        ||  Connector Key    ||  Connector Key            || 65    ||    Connector Key        || Connector Key
+
−
|-
+
−
|66        || Connector Key    ||  Connector Key                    || 67    ||    N/C      ||  no connection
+
−
|-
+
−
|68        ||  RTC_CLKO_SOC  ||  1.8V 32.768KHz  clock output            || 69    ||    N/C        ||  no connection
+
−
|-
+
−
|70        ||  VCC3V3_SYS ||    3.3V Power output                  || 71    ||    GND                    ||  Return current path
+
−
|-
+
−
|72        || VCC3V3_SYS  ||    3.3V Power output                        || 73    ||  GND                      || Return current path
+
−
|-
+
−
|74        ||  VCC3V3_SYS  ||  3.3V Power output                        || 75    ||  GND                      || Return current path
+
−
|}
+
−
* '''ADC interface Pin Spec'''
+
−
:: ADC input rang : 0~1.8V
+
−
::{| class="wikitable"
+
−
|-
+
−
|'''Pin#''' ||'''Assignment'''     
+
−
|-
+
−
|1    || GND   
+
−
|-
+
−
|2    || VCC_1V8   
+
−
|-
+
−
|3    || ADC_IN0
+
−
|-
+
−
|4    || ADC_IN2
+
−
|-
+
−
|5    || ADC_IN3
+
−
|}
+
−
* '''Cooling Fan interface Pin Spec'''
+
−
:: Connector P/N: JST GH connector，BM03B-GHS-TBT
+
−
::{| class="wikitable"
+
−
|-
+
−
|'''Pin#''' ||'''Assignment'''  || '''Description '''   
+
−
|-
+
−
|1    || GND                || 0V
+
−
|-
+
−
|2    || 12V                || 12V output ,controlled by GPIO4_C6/PWM1
+
−
|-
+
−
|3    || GPIO2_A6_FAN_TACH  || connect to tachometer output signal , or float
+
−
|}
+
−
* '''Debug UART Pin Spec'''
+
−
:: 3V level signals, 1500000bps
+
−
::{| class="wikitable"
+
−
|-
+
−
|'''Pin#''' ||'''Assignment''' ||  '''Description ''' 
+
−
|-
+
−
|1    || GND                || 0V
+
−
|-
+
−
|2    || VCC5V0_SYS          || 5V power output
+
−
|-
+
−
|3    || UART2DBG_TX        || output
+
−
|-
+
−
|4    || UART2DBG_RX        || intput
+
−
|}
+
−
*'''Power Jack'''
+
−
::*DC-12V/2A IN, 5.5*2.1mm Power Jack
+
−
::[[File:DC-007B.png]]
+
−
*'''Power Key'''
+
−
::Plug in 12V power at power jack, then press the Power Key ( > 0.5s ) to boot NanoPC-T4.
+
−
*'''USB Port'''
+
−
::USB Type-C port has 2A overcurrent protection.
+
−
::USB 3.0 port has 2A overcurrent protection.
+
−
::Two USB 2.0 host port share 2A overcurrent protection.
+
−
*'''BOOT Key'''
+
−
::Press BOOT key to prevent the board from eMMC booting, making the board enter MASKROM mode.
+
−
*'''RTC'''
+
−
::RTC backup current is 27uA.
+
−
::Connector P/N: Molex 53398-0271
+
−
:'''Notes'''
+
−
::#The Power Jack is the only power input port. All power pins at other ports are output.
+
−
::#[[Modify_T4_PWRON|How to make T4(1802) start automatically when power is plugged in]]
+
−
::#For more details refer to [[#Schematic.2C_PCB_CAD_File|Schematics]]
+
−
 
+
−
===Board Dimension===
+
−
[[File:NanoPC-T4_1802_Drawing.png|frameless|800px|NanoPC-T4 Dimensions]]
+
−
 
+
−
::For more details refer to the CAD document: [http://wiki.friendlyelec.com/wiki/images/b/bc/NanoPC-T4_1802_Drawing%28dxf%29.zip NanoPC-T4_1802_Drawing(dxf).zip]
+
−
 
+
−
==Get Started==
+
−
===Essentials You Need===
+
−
Before starting to use your NanoPC-T4 get the following items ready
+
−
* NanoPC-T4
+
−
* Type-C cable
+
−
* TF Card: Class 10 or Above, minimum 8GB SDHC
+
−
* USB to serial adapter(optinal, for debugging or access from PC host)
+
−
* A DC 12V/2A power is a must
+
−
* HDMI monitor or LCD
+
−
* USB keyboard, mouse and possible a USB hub(or a TTL to serial board)
+
−
* A host computer running <b>Ubuntu 18.04 64-bit system</b>
+
−
 
+
−
{{RK3399-DebugPort|NanoPC-T4}}
+
−
==Work with Debian11 Desktop==
+
−
===Introduction to Debian11 Desktop===
+
−
{{DebianBullseyeDesktop-Intro|NanoPC-T4}}
+
−
{{DebianBullseyeDesktop-Common|NanoPC-T4}}
+
−
{{DebianBullseyeDesktop-WithHDMI|NanoPC-T4}}
+
−
==Work with Debian10 Desktop==
+
−
* Refer to：
+
−
** [[Debian Buster Desktop|Debian Buster]]
+
−
==Work with FriendlyDesktop==
+
−
{{FriendlyDesktop-Intro|NanoPC-T4}}
+
−
{{FriendlyDesktop-Contents|NanoPC-T4}}
+
−
===Using NVME SSD on FriendlyDesktop===
+
−
Please see this article: [[Template:How to Initialize and Format New SSD And HDD|How to Initialize and Format New SSD And HDD]]<br />
+
−
===How to setup WiFiAP on FriendlyDesktop===
+
−
Please see this article: [[Template:Linux-Create-WiFiAP]]<br />
+
−
{{FriendlyCoreGeneral|NanoPC-T4}}
+
−
{{FriendlyCoreRunX11Application|NanoPC-T4}}
+
−
{{RK3399 Linux mpv|NanoPC-T4}}
+
−
===Change startup LOGO===
+
−
Replace the following two files in the kernel source code directory and recompile the kernel：<br/>
+
−
kernel/logo.bmp<br/>
+
−
kernel/logo_kernel.bmp<br/>
+
−
Or use the script to operate, as shown below：
+
−
<syntaxhighlight lang="bash">
+
−
git clone https://github.com/friendlyarm/sd-fuse_rk3399
+
−
cd sd-fuse_rk3399
+
−
convert files/logo.jpg -type truecolor /tmp/logo.bmp
+
−
convert files/logo.jpg -type truecolor /tmp/logo_kernel.bmp
+
−
LOGO=/tmp/logo.bmp KERNEL_LOGO=/tmp/logo_kernel.bmp ./build-kernel.sh eflasher
+
−
LOGO=/tmp/logo.bmp KERNEL_LOGO=/tmp/logo_kernel.bmp ./build-kernel.sh friendlydesktop-arm64
+
−
./mk-emmc-image.sh friendlydesktop-arm64
+
−
</syntaxhighlight>
+
−
==Features applicable to FriendlyDesktop and FriendlyCore==
+
−
{{Linux-RK3399MIPICamera|NanoPC-T4}}
+
−
{{RK3399-Linux-Install-Docker|NanoPC-T4}}
+
−
{{RK3399 Linux FFmpeg|NanoPC-T4}}
+
−
{{How to Initialize and Format New SSD And HDD|NanoPC-T4}}
+
−
{{RK3399 Linux PWMFan|NanoPC-T4}}
+
−
===Using 4G Module EC20 on Linux===
+
−
Please see this article: [[How to use 4G Module on NanoPC-T4]]<br />
+
−
==Buildroot Linux==
+
−
{{RK3399 Buildroot Intro|NanoPC-T4}}
+
−
<br />
+
−
For a more detailed description of the Buildroot system, please refer to: [[Buildroot|Buildroot]]<br />
+
−
==Work with Lubuntu==
+
−
See here: [[Lubuntu desktop 16.04 for RK3399]]<br />
+
−
Using NVME SSD on Lubuntu: [[Template:How to Initialize and Format New SSD And HDD|How to Initialize and Format New SSD And HDD]]<br />
+
−
{{RK3399-Android8|NanoPC-T4}}
+
−
{{RK3399-Android-RemoteController|NanoPC-T4}}
+
−
{{RK3399-Android-USBCamera|NanoPC-T4}}
+
−
{{RK3399-Android-4G-EC20|NanoPC-T4}}
+
−
{{RK3399-Android-SSD|NanoPC-T4}}
+
−
{{RK3399 Android PWMFan|NanoPC-T4}}
+
−
==Work with Android7.1==
+
−
See here: [[RK3399-Android7|Android7]]
+
−
==How to Compile==
+
−
{{Rockchip-DevEnv|NanoPC-T4}}
+
−
{{RK3399-BuildFromSource|NanoPC-T4}}
+
−
{{RK3399-HWAccess|NanoPC-T4}}
+
−
{{RockchipMiscCustome|RK3399}}
+
−
 
+
−
{{MoreOS}}
+
−
==Link to Rockchip Resources==
+
−
*Link to Rockchip's resources: https://gitlab.com/friendlyelec/rk3399-nougat/tree/nanopc-t4-nougat/RKDocs
+
−
*[http://opensource.rock-chips.com/images/d/d7/Rockchip_RK3399_Datasheet_V2.1-20200323.pdf RK3399 datasheet V2.1]
+
−
*[http://opensource.rock-chips.com/images/e/ee/Rockchip_RK3399TRM_V1.4_Part1-20170408.pdf RK3399TRM V1.4]
+
−
 
+
−
==Schematic, PCB CAD File==
+
−
*Schematic: [http://wiki.friendlyelec.com/wiki/images/f/f4/NanoPC-T4-1802-Schematic.pdf NanoPC-T4-1802-Schematic.pdf]
+
−
*Schematic: [http://wiki.friendlyelec.com/wiki/images/e/e0/NanoPC-T4-1902-Schematic.pdf NanoPC-T4-1902-Schematic.pdf]
+
−
*PCB CAD File：[http://wiki.friendlyelec.com/wiki/images/b/bc/NanoPC-T4_1802_Drawing%28dxf%29.zip NanoPC-T4_1802_Drawing(dxf).zip]
+
−
 
+
−
==Update Log==
+
−
{{RK3399-UpdateLog|NanoPC-T4}}
+

Latest revision as of 09:58, 29 October 2024

1 安装系统到M.2或USB硬盘

可以通过使用TF卡启动eFlasher系统，将引导和系统分别安装到不同存储设备，但是由于CPU不支持直接从M.2和USB设备引导，所以虽然系统可以安装到M.2和USB设备，但是引导仍然需要安装到eMMC或者TF卡。
操作步骤如下：

  • 准备一张32G或以上容量的TF卡;
  • 访问此处的下载地址下载文件名为XXXX-eflasher-multiple-os-YYYYMMDD-30g.img.gz的固件(位于"01_系统固件/02_SD卡刷机固件(SD-to-eMMC)"目录);
  • 将固件写入TF卡，在NanoPC-T4上连接好存储设备，插入TF卡上电开机，接下来要在界面上操作，如果没有显示设备，可以使用VNC代替，请参考使用VNC操作eFlasher;
  • 在eFlasher界面上，首先选择要安装的OS，然后选择引导安装的目的地 (通常选eMMC)，以及选择系统安装的目的地（可以选eMMC,M.2硬盘,USB存储设备等），如下图所示：

Eflasher-select-boot-and-system-device.png

  • 没有eMMC时可使用TF卡作为引导，方法是将另一个TF卡通过USB读卡器插入USB端口，然后选择USB设备作为引导安装目的地，从而实现从TF卡引导，但系统存放在M.2或USB硬盘的目的;
  • 烧写完成后，从NanoPC-T4弹出SD卡，引导在eMMC的情况下，NanoPC-T4会自动重启至你刚刚烧写的系统，如果引导安装在TF卡，则需要拨掉电源，插入TF引导卡再上电开机;
  • 更详细的安装指南请参考此处;

2 Installing the System to M.2 or USB Drive

You can use a TF card to boot the eFlasher system, allowing the boot and system to be installed on different storage devices. However, since the CPU doesn’t support booting directly from M.2 and USB devices, the system can be installed on M.2 and USB devices, but the boot must still be installed on eMMC or a TF card.
Steps are as follows:

  • Prepare a TF card with a capacity of 32GB or larger.
  • Visit [the download link here](http://download.friendlyelec.com/APITestPage) to download the firmware file named XXXX-eflasher-multiple-os-YYYYMMDD-30g.img.gz (located in the “01_Official images/02_SD-to-eMMC images” directory).
  • Flash the firmware to the TF card, connect the storage device you intend to use on NanoPC-T4, insert the TF card and power on, we need to perform the operations in the eFlasher GUI. If your NanoPC-T4 does not have a display interface, you can use VNC; refer to Using VNC to Operate eFlasher.
  • In the eFlasher GUI, select the OS to install, and in the OS settings interface, choose the destination for boot installation (typically eMMC), then choose the destination for system installation (options include eMMC, M.2 hard drive, USB storage, etc.), as shown below:

Eflasher-select-boot-and-system-device.png

  • If no eMMC is available, the TF card can serve as the boot by inserting another TF card into the USB port via a USB card reader and selecting it as the boot destination, enabling booting from the TF card with the system stored on the M.2 or USB drive.
  • After flashing, eject the SD card from NanoPC-T4. If booting from eMMC, NanoPC-T4 will automatically restart into the newly flashed system. If boot installation is on a TF card, power off, insert the boot TF card, and power on again.
  • For a more detailed installation guide, please refer to this link.
Retrieved from "https://wiki.friendlyelec.com/wiki/index.php?title=APITestPage&oldid=26502"