Difference between revisions of "Template:H5SoftwareFeature-FriendlyCore"

From FriendlyELEC WiKi
Jump to: navigation, search
(updated by API)
 
(7 intermediate revisions by 2 users not shown)
Line 3: Line 3:
 
| style="background: PaleTurquoise; color: black" colspan="2"| '''FriendlyCore System'''         
 
| style="background: PaleTurquoise; color: black" colspan="2"| '''FriendlyCore System'''         
 
|-
 
|-
−
|Cross-Compiler ||  
+
|Cross-Compiler
 +
|style="width: 90%;"|
 
*gcc-linaro-6.3.1-2017.02-x86_64_aarch64-linux-gnu <br>
 
*gcc-linaro-6.3.1-2017.02-x86_64_aarch64-linux-gnu <br>
 
*it applies to 64-bit Armv8 Cortex-A, little-endian architechture. FriendlyElec uses it for its H5 based boards.
 
*it applies to 64-bit Armv8 Cortex-A, little-endian architechture. FriendlyElec uses it for its H5 based boards.
Line 17: Line 18:
 
|rowspan="1"| Linux-4.14
 
|rowspan="1"| Linux-4.14
 
|
 
|
−
*支持LED，通过/sys/class/leds访问。
+
*It supports LED. You can access it via "/sys/class/leds".
−
*支持GPIO，通过/sys/class/gpio/访问。
+
*It supports GPIO. You can access it via "/sys/class/gpio/".
−
*支持UART0/1/2/3，通过/dev/ttySX访问。
+
*It supports UART0/1/2/3. You can access it via "/dev/ttySX".
 
{{#switch: {{{1}}}
 
{{#switch: {{{1}}}
 
  | NanoPi-K1-Plus|NanoPi-NEO-Core2 =
 
  | NanoPi-K1-Plus|NanoPi-NEO-Core2 =
−
*支持I2C0/1/2，通过/dev/i2c-X访问。
+
*It supports I2C0/1/2. You can access it via "/dev/i2c-X".
 
  | NanoPi-NEO2|NanoPi-NEO-Plus2 =
 
  | NanoPi-NEO2|NanoPi-NEO-Plus2 =
−
*支持I2C0，通过/dev/i2c-X访问。
+
*It supports I2C0. You can access it via "/dev/i2c-X".
 
}}
 
}}
 
{{#switch: {{{1}}}
 
{{#switch: {{{1}}}
 
  | NanoPi-K1-Plus|NanoPi-NEO-Core2 =
 
  | NanoPi-K1-Plus|NanoPi-NEO-Core2 =
−
*支持SPI0/1，通过/dev/spidevX.X访问，SPI1与UART3引脚复用。
+
*It supports SPI0/1. You can access it via "/dev/spidevX.X". The SPI1 and UART3 pins are multiplexed.
 
  | NanoPi-NEO2|NanoPi-NEO2-Plus2 =
 
  | NanoPi-NEO2|NanoPi-NEO2-Plus2 =
−
*支持SPI0，通过/dev/spidevX.X访问。
+
*It supports SPI0. You can access it via "/dev/spidevX.X".
 
}}
 
}}
−
*支持PWM0，通过/sys/class/pwm/访问，与UART0引脚复用。
+
*It supports PWM0. You can access it via "/sys/class/pwm/". The UART0 pin is multiplexed.
−
*支持I2S0，默认配合PCM5102A codec使用，与I2C1引脚复用。
+
*It supports I2S0. It works together with PCM5102A codec. The I2C1 pin is multiplexed.
−
*支持Watchdog，通过/dev/watchX访问。
+
*It supports Watchdog. You can access it via "/dev/watchX".
−
*支持读取CPU ID，通过/sys/bus/nvmem/devices/sunxi-sid0/nvmem访问。
+
*It can read a CPU ID. You can access it via "/sys/bus/nvmem/devices/sunxi-sid0/nvmem".
 
{{#switch: {{{1}}}
 
{{#switch: {{{1}}}
 
  | NanoPi-K1-Plus =
 
  | NanoPi-K1-Plus =
−
*支持IR Receive
+
*It supports IR Receiver
 
  | #default =  
 
  | #default =  
−
*支持IR Receive，需自行外接IR接收器。
+
*It supports IR Receiver. You need to connect an IR receiver to the board.
 
}}
 
}}
 
{{#switch: {{{1}}}
 
{{#switch: {{{1}}}
 
  | NanoPi-K1-Plus =
 
  | NanoPi-K1-Plus =
−
*支持WiFi模块RTL8189。
+
*It supports WiFi RTL8189.
−
*支持HDMI音视频输出。
+
*It supports HDMI audio output.
 
}}
 
}}
−
*支持CPU动态电压调节。
+
*It supports dynamic CPU voltage regulation.
 
{{#switch: {{{1}}}
 
{{#switch: {{{1}}}
 
  | NanoPi-K1-Plus|NanoPi-NEO-Core2|NanoPi-NEO2 =
 
  | NanoPi-K1-Plus|NanoPi-NEO-Core2|NanoPi-NEO2 =
−
*支持Micro USB OTG。
+
*It supports Micro USB OTG.
 
}}
 
}}
 
{{#switch: {{{1}}}
 
{{#switch: {{{1}}}
 
  | NanoPi-K1-Plus|NanoPi-NEO-Core2|NanoPi-NEO2 =
 
  | NanoPi-K1-Plus|NanoPi-NEO-Core2|NanoPi-NEO2 =
−
*支持USB Host1/2/3。
+
*It supports USB Host1/2/3.
 
  | NanoPi-NEO-Plus2 =
 
  | NanoPi-NEO-Plus2 =
−
*支持USB Host0/1/2/3。
+
*It supports USB Host0/1/2/3.
 
}}
 
}}
−
*支持TF Card。
+
*It supports TF Card.
 
{{#switch: {{{1}}}
 
{{#switch: {{{1}}}
 
  | NanoPi-K1-Plus|NanoPi-NEO-Core2|NanoPi-NEO-Plus2 =
 
  | NanoPi-K1-Plus|NanoPi-NEO-Core2|NanoPi-NEO-Plus2 =
−
*支持eMMC。
+
*It supports eMMC.
 
}}
 
}}
−
*支持1000M Ethernet。
+
*It supports 1000M Ethernet.
−
*支持H5自带Codec，录音与播放。
+
*It supports H5's internal Codec and supports voice playing and recording.
 
{{#switch: {{{1}}}
 
{{#switch: {{{1}}}
 
  | NanoPi-K1-Plus =  
 
  | NanoPi-K1-Plus =  
−
*支持DVP Camera(CAM500B)。
+
*It supports DVP Camera(CAM500B).
 
}}
 
}}
−
*支持USB Camera(CAM202)。
+
*It supports USB Camera(CAM202).
−
*支持市面上常见USB WiFi Adapter。
+
*It supports popular USB WiFi Adapters.
−
*支持市面上常见USB Ethernet Adapter。
+
*It supports popular USB Ethernet Adapters.
−
*支持市面上常见USB Serial Converter。
+
*It supports popular USB Serial Converters.
−
*支持市面上常见USB Sound Card。
+
*It supports popular USB Sound Cards.
 
{{#switch: {{{1}}}
 
{{#switch: {{{1}}}
 
  | NanoPi-NEO2|NanoPi-NEO-Core2|NanoPi-NEO-Plus2 =
 
  | NanoPi-NEO2|NanoPi-NEO-Core2|NanoPi-NEO-Plus2 =
−
*支持NanoHat PCM5102A。
+
*It supports FriendlyElec's NanoHat PCM5102A.
 
}}
 
}}
 
{{#switch: {{{1}}}
 
{{#switch: {{{1}}}
 
  | NanoPi-NEO-Core2 =
 
  | NanoPi-NEO-Core2 =
−
*支持SPI Flash MX25L12835F。
+
*It supports SPI Flash MX25L12835F.
 
}}
 
}}
 
|-
 
|-
−
|rowspan="1"| 文件系统
+
|rowspan="1"| File System
 
|
 
|
−
*基于UbuntuCore-16.04构建，保留UbuntuCore的原始特性。
+
*Based on UbuntuCore-16.04, it has original UbuntuCore features.
−
*内置常用软件包: VIM/Nano/SSHserver等。
+
*It has popular utilties:VIM/Nano/SSHserver and etc.
−
*内置Qt-Embedded-4.8，适合企业用户快速开发需要图形界面的产品。
+
*It has Qt-Embedded-4.8 and suitable for rapid product prototyping which needs a GUI.
−
*内置网络管理工具NetworkManager，自动检测和连接网络，便于管理网络，参考[[Use_NetworkManager_to_configure_network_settings | NetworkManager]]。
+
*It has a network management utility "NetworkManager" which can automatically detect and connect to a network. For more details refer to:[[Use_NetworkManager_to_configure_network_settings | NetworkManager]]。
−
*内置命令行配置工具npi-config，可用于配置用户密码、系统语言、时区、Hostname、SSH开关、自动登录选项、硬件接口，参考[[Npi-config]]。
+
*It has a commandline utility "npi-config" which can be used to set a user password, language, timezone, Hostname, SSH enable/disable, auto-login, hardware interface and etc. For more details refer to [[Npi-config]]。
−
*支持首次启动时自动扩展文件系统。<!-- 默认情况下烧写到SD卡上的文件系统仅能使用4GB以内的存储空间，扩展完成后即可使用存储设备的完整存储空间。-->
+
*It uses overlayfs.
−
*支持启动时自动修复文件系统。<!-- 避免由于不正常关机而导致文件损坏的问题。-->
+
*It expands the file system on the first system boot.<!-- by default the file system set on an SD card has only 4G available. After the file system is expanded the whole SD card's space will be available.-->
−
*启动512MB的swap分区。
+
*It supports file system auto-repair on system boot.<!-- Files that were damaged will be automatically repaired on system reboot.-->
−
*支持WiringNP，通过类似Arduino的API访问NanoPi的gpio/i2c/spi等，参考[[WiringNP:_NanoPi_NEO/NEO2/Air_GPIO_Programming_with_C | [WiringNP]]。
+
*It supports 512MB's swap.
−
*支持BakeBit，BakeBit是一套传感器连接的解决方案，包括硬件(NanoHat Hub扩展板)和软件(BakeBit)，参考[[BakeBit_Starter_Kit_with_NanoPi_NEO/NEO2/NEO_Air|BakeBit ]]。
+
*It supports WiringNP which functions like Arduino's API and can be used to access NanoPi boards' gpio/i2c/spi and etc. For more details refer to:[[WiringNP:_NanoPi_NEO/NEO2/Air_GPIO_Programming_with_C | WiringNP]]。
−
*支持RPi.GPIO，通过Python访问NanoPi的gpio，参考[[RPi.GPIO_:_NanoPi_NEO/NEO2/Air_GPIO_Programming_with_Python | RPi.GPIO]]。
+
*It supports FriendlyElec's BakeBit which is a set of sensor modules including hardware components(such as NanoHat Hub extension board) and software (such as BakeBit). For more details refer to [[BakeBit_Starter_Kit_with_NanoPi_NEO/NEO2/NEO_Air|BakeBit ]].
 +
*It supports RPi.GPIO which can be used to access NanoPi boards' gpio with Python. For more details refer to [[RPi.GPIO_:_NanoPi_NEO/NEO2/Air_GPIO_Programming_with_Python | RPi.GPIO]].
 
|-
 
|-
 
|}
 
|}

Latest revision as of 06:16, 21 October 2019

FriendlyCore System
Cross-Compiler
  • gcc-linaro-6.3.1-2017.02-x86_64_aarch64-linux-gnu
  • it applies to 64-bit Armv8 Cortex-A, little-endian architechture. FriendlyElec uses it for its H5 based boards.
U-boot-2017.11
  • It can recognize a FriendlyElec's H5 based board and load its dtb file accordingly.
  • It optimizes memory settings.
  • It supports voltage regulation IC sy8106a and applies only to NanoPi K1 Plus/NanoPi NEO Core2.
  • It supports MAC generation from H5's CPU ID.
  • It supports system booting from either SD card or eMMC and can automatically load the kernel from the booting device.
Linux-4.14
  • It supports LED. You can access it via "/sys/class/leds".
  • It supports GPIO. You can access it via "/sys/class/gpio/".
  • It supports UART0/1/2/3. You can access it via "/dev/ttySX".


  • It supports PWM0. You can access it via "/sys/class/pwm/". The UART0 pin is multiplexed.
  • It supports I2S0. It works together with PCM5102A codec. The I2C1 pin is multiplexed.
  • It supports Watchdog. You can access it via "/dev/watchX".
  • It can read a CPU ID. You can access it via "/sys/bus/nvmem/devices/sunxi-sid0/nvmem".
  • It supports IR Receiver. You need to connect an IR receiver to the board.
  • It supports dynamic CPU voltage regulation.


  • It supports TF Card.
  • It supports 1000M Ethernet.
  • It supports H5's internal Codec and supports voice playing and recording.
  • It supports USB Camera(CAM202).
  • It supports popular USB WiFi Adapters.
  • It supports popular USB Ethernet Adapters.
  • It supports popular USB Serial Converters.
  • It supports popular USB Sound Cards.


File System
  • Based on UbuntuCore-16.04, it has original UbuntuCore features.
  • It has popular utilties:VIM/Nano/SSHserver and etc.
  • It has Qt-Embedded-4.8 and suitable for rapid product prototyping which needs a GUI.
  • It has a network management utility "NetworkManager" which can automatically detect and connect to a network. For more details refer to: NetworkManager。
  • It has a commandline utility "npi-config" which can be used to set a user password, language, timezone, Hostname, SSH enable/disable, auto-login, hardware interface and etc. For more details refer to Npi-config。
  • It uses overlayfs.
  • It expands the file system on the first system boot.
  • It supports file system auto-repair on system boot.
  • It supports 512MB's swap.
  • It supports WiringNP which functions like Arduino's API and can be used to access NanoPi boards' gpio/i2c/spi and etc. For more details refer to: WiringNP。
  • It supports FriendlyElec's BakeBit which is a set of sensor modules including hardware components(such as NanoHat Hub extension board) and software (such as BakeBit). For more details refer to BakeBit .
  • It supports RPi.GPIO which can be used to access NanoPi boards' gpio with Python. For more details refer to RPi.GPIO.
Retrieved from "https://wiki.friendlyelec.com/wiki/index.php?title=Template:H5SoftwareFeature-FriendlyCore&oldid=20263"