Difference between revisions of "Template:BurnAndroidToEMMC-Allwinner"
From FriendlyELEC WiKi
(updated by API) |
(→eMMC启动) |
||
| Line 1: | Line 1: | ||
| − | ===== | + | =====Boot from eMMC===== |
| − | * | + | * Extract the Android image file and the USB flashing utility "LiveSuitV306_For_Linux64.zip" under Ubuntu and run the following commands to install LiveSuit： |
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
$ ./LiveSuit.run | $ ./LiveSuit.run | ||
| Line 9: | Line 9: | ||
$ ./LiveSuit.sh | $ ./LiveSuit.sh | ||
</syntaxhighlight> | </syntaxhighlight> | ||
| − | + | Click on the Image button to select an Android image file:<br> | |
[[File:sunxi-livesuit-select.png|frameless|500px|]] | [[File:sunxi-livesuit-select.png|frameless|500px|]] | ||
| − | * | + | * Refer to [[NanoPi_M1_Plus#.E7.BC.96.E8.AF.91U-boot|编译烧写U-boot]] to make an installation TF card with U-boot; |
* 制作完成TF卡后，拔出TF卡插入板子的BOOT卡槽，使用MicroUSB线连接板子和PC机，此时板子会上电启动并运行U-boot，键盘敲入任意按键进行U-boot命令行模式，执行下列命令进行USB下载模式: | * 制作完成TF卡后，拔出TF卡插入板子的BOOT卡槽，使用MicroUSB线连接板子和PC机，此时板子会上电启动并运行U-boot，键盘敲入任意按键进行U-boot命令行模式，执行下列命令进行USB下载模式: | ||
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
Revision as of 09:52, 29 January 2018
Boot from eMMC
- Extract the Android image file and the USB flashing utility "LiveSuitV306_For_Linux64.zip" under Ubuntu and run the following commands to install LiveSuit：
$ ./LiveSuit.run
运行LiveSuit：
$ cd /root/Bin/LiveSuit $ ./LiveSuit.sh
Click on the Image button to select an Android image file:
- Refer to 编译烧写U-boot to make an installation TF card with U-boot;
- 制作完成TF卡后，拔出TF卡插入板子的BOOT卡槽，使用MicroUSB线连接板子和PC机，此时板子会上电启动并运行U-boot，键盘敲入任意按键进行U-boot命令行模式，执行下列命令进行USB下载模式:
$ efex此时PC机上的LiveSuit工具会弹出是否进行烧写的提示，如下:
注意：必须先在PC机上运行LiveSuit，再执行efex命令，否则将检测失败。
点击Yes按钮，开始通过USB将Android系统固件烧写到eMMC中。等待烧写完毕后，断电并从BOOT卡槽中取出TF卡，此时再上电就会从eMMC启动系统了。
