NanoPi R5S

From FriendlyELEC WiKi
Revision as of 02:11, 6 May 2022 by Yonganch (Talk | contribs) (Hardware Spec)

Jump to: navigation, search

查看中文

1 Introduction

Overview
Front
Back
  • The NanoPi R5S is a RK3568 SoC based ARM board.

2 Hardware Spec

  • SoC: Rockchip RK3568
    • CPU: Quad-core ARM Cortex-A55 CPU, up to 2.0GHz
    • GPU: Mali-G52 1-Core-2EE,supports OpenGL ES 1.1, 2.0, and 3.2, Vulkan 1.0 and 1.1, OpenCL 2.0 Full Profile
    • VPU: 4KP60 H.265/H.264/VP9 video decoder, 1080P60 H.264/H.265 video encoder
    • NPU: Support 0.8T
  • RAM: 2GB LPDDR4X
  • Flash: 8GB eMMC
  • Ethernet: one Native Gigabit Ethernet, and two PCIe 2.5G Ethernet
  • USB: two USB 3.0 Type-A ports
  • HDMI:
    • support HDMI1.4 and HDMI2.0 operation
    • support up to 10 bits Deep Color modes
    • support up to 1080p@120Hz and 4096x2304@60Hz
    • support 3-D video formats
  • PCIe: M.2 Key M, PCIe2.0 x1, support NVME, PCIe WiFi etc
  • microSD: support UHS-I
  • GPIO:
    • 12-pin 0.5mm FPC connector
    • with up to 1x SPI, up to 3x UARTs, up to 2x PWMs, up to 8x GPIOs
  • SDIO or I2S:
    • 2x8-pin 1.27mm connector
    • Compatible with SDIO3.0 protocol
    • 4bits data bus widths
    • or 1x I2S with 2x SDO and 3x SDI
  • Debug: one Debug UART, 3 Pin 2.54mm header, 3.3V level, 1500000bps
  • LEDs: 4 x GPIO Controlled LED (SYS, WAN, LAN1, LAN2)
  • others:
    • 2 Pin 1.27/1.25mm RTC battery input connector for low power RTC IC HYM8563TS
    • MASK KEY for eMMC update
    • one 5V Fan connector
  • Power supply: USB-C, support PD, 5V/9V/12V input
  • PCB: 8 Layer, 62x90x1.6mm
  • Ambient Operating Temperature: 0℃ to 70℃

3 Diagram, Layout and Dimension

3.1 Layout

NanoPi R5S Layout
  • 12-pin GPIO
Pin# GPIO SPI UART PWM POWER Description
1 VCC3V3_SYS 3.3V power output
2 VCC3V3_SYS 3.3V power output
3 GPIO3_C3 SPI1_CLK_M1 UART5_RX_M1 3.3V level
4 GND
5 GPIO3_C2 SPI1_MISOI_M1 UART5_TX_M1 3.3V level
6 GPIO3_A1 SPI1_CS0_M1 3.3V level
7 GPIO3_C1 SPI1_MOSI_M1 3.3V level
8 GND
9 GPIO4_C5 UART9_TX_M1 3.3V level
10 GPIO4_C6 UART9_RX_M1 3.3V level
11 GPIO3_C4 UART7_TX_M1 PWM14_M0 3.3V level
12 GPIO3_C5 UART7_RX_M1 PWM15_IR_M0 3.3V level
  • 2x8-pin SDIO/I2S
Pin# GPIO SDIO I2S POWER Description
1 VCC5V0_SYS 5V power output
2 VCC5V0_SYS 5V power output
3 GPIO3_C6 SDMMC2_D0_M0 I2S1_MCLK_M1 1.8V level
4 GPIO3_C7 SDMMC2_D1_M0 I2S1_SCLK_TX_M1 1.8V level
5 GND
6 GND
7 GPIO3_D0 SDMMC2_D2_M0 I2S1_LRCK_TX_M1 1.8V level
8 GPIO3_D3 SDMMC2_CLK_M0 I2S1_SDI1_M1 1.8V level
9 GND
10 GND
11 GPIO3_D1 SDMMC2_D3_M0 I2S1_SDO0_M1 1.8V level
12 GPIO3_D2 SDMMC2_CMD_M0 I2S1_SDI0_M1 1.8V level
13 GND
14 GND
15 GPIO3_D5 I2S1_SDI3_M1 1.8V level
16 GPIO3_D4 I2S1_SDI2_M1 1.8V level
  • Debug UART Pin Spec
3.3V level signals, 1500000bps
Pin# Assignment Description
1 GND 0V
2 UART2DBG_TX output
3 UART2DBG_RX intput
  • USB Port
Each USB 3.0 port has 1.4A overcurrent protection.
  • RTC
RTC backup current is 0.25μA TYP (VDD =3.0V, TA =25℃).
Connector P/N: Molex 53398-0271

4 Get Started

5 Link to Rockchip Resources

6 Schematic, PCB CAD File

  • Schematic: []
  • PCB CAD File:[]