Template:RK3399-BootFromSDCard

Boot from SD Card

Get the following files from here download link:

• Get an 8G SDHC card and backup its data if necessary.
  

Image Files
rk3399-sd-debian-bullseye-core-4.19-arm64-YYYYMMDD.img.gz	Debian 11(Bullseye) Core, No desktop environment, command line only, Kernel version 4.19.y
rk3399-sd-debian-buster-desktop-arm64-YYYYMMDD.img.gz	Debian 10(buster) Desktop, Uses LXDE as default desktop, Supports hardware acceleration, Kernel version 4.19.y
rk3399-sd-buildroot-linux-4.19-arm64-YYYYMMDD.img.zip	Buildroot image file with Qt5-wayland (base on Rockchip Linux SDK)
rk3399-sd-friendlydesktop-bionic-4.4-arm64-YYYYMMDD.img.zip	FriendlyDesktop image file with X Window (base on Ubuntu 18.04 64bit)
rk3399-sd-friendlycore-bionic-4.4-arm64-YYYYMMDD.img.gz	FriendlyCore with Qt 5.10.0 (base on Ubuntu core 18.04) image file, kernel 4.4
rk3399-sd-friendlycore-focal-4.19-arm64-YYYYMMDD.img.gz	FriendlyCore with Qt 5.10.0 (base on Ubuntu core 20.04) image file, kernel 4.19
rk3399-sd-friendlycore-lite-focal-5.15-arm64-YYYYMMDD.img.gz	Lite version, No pre-installed Qt, Base on Ubuntu core 20.04, kernel 5.15
rk3399-sd-lubuntu-desktop-xenial-4.4-armhf-YYYYMMDD.img.zip	Lubuntu Desktop image file with X Window
rk3399-sd-android10-YYYYMMDD.img.gz	Android 10
rk3399-sd-friendlywrt-YYYYMMDD.img.zip	FriendlyWrt image file, based on OpenWrt 21.02, kernel version 5.15.y
rk3399-sd-friendlywrt-21.02-docker-YYYYMMDD.img.gz	FriendlyWrt image file，based on OpenWrt 21.02, Pre-installed Docker，kernel version 5.15.y
rk3399-sd-friendlywrt-22.03-YYYYMMDD.img.gz	FriendlyWrt image file，based on OpenWrt 22.03，kernel version 5.15.y
rk3399-sd-friendlywrt-22.03-docker-YYYYMMDD.img.gz	FriendlyWrt image file，based on OpenWrt 22.03, Pre-installed Docker，kernel version 5.15.y
rk3399-sd-friendlywrt-kernel4-YYYYMMDD.img.zip	FriendlyWrt image file, based on OpenWrt 21.02, kernel version 4.19.y
Flash Utility:
win32diskimager.rar	Windows utility. Under Linux users can use "dd"

• Extract these files. Insert an SD card(at least 8G) into a Windows PC and run the win32diskimager utility as administrator. On the utility's main window select your SD card's drive, the wanted image file and click on "write" to start flashing the SD card.
• Insert this card into your board's boot slot and power on, If the PWR LED is on and LED1 is blinking this indicates your board has successfully booted.
• The Android system does not support starting from the SD card. If you need to run the Android system, please buy the eMMC module, and then burn the Android system to the eMMC to run, referring to the following section.