Difference between revisions of "Template:OfficialUbuntuCore/zh"

Revision as of 05:19, 7 February 2020

   User Name: pi
   Password: pi

   User Name: Root
   Password: fa

$ sudo apt-get update

By default "eth0" is assigned an IP address obtained via dhcp. If you want to change the setting you need to change the following file:

vi /etc/network/interfaces.d/eth0

比如修改成静态IP地址，如下所示：

auto eth0
iface eth0 inet static
    address 192.168.1.231
    netmask 255.255.255.0
    gateway 192.168.1.1

要配置另一个网口 eth1，可以在 /etc/network/interfaces.d/ 下新增一个 eth1 文件，配置格式可以参考 eth0。

@@ Line 7: / Line 7: @@
      User Name: Root
      Password: fa
-===更新软件包===
+===Update Software Packages===
 <syntaxhighlight lang="bash">
 $ sudo apt-get update
 </syntaxhighlight>
-===配置网络===
+===Setup Network Configurations===
-默认已将 eth0 配置成 dhcp 自动获取IP地址，要更改配置，可以修改这个文件：
+By default "eth0" is assigned an IP address obtained via dhcp. If you want to change the setting you need to change the following file:
 <syntaxhighlight lang="bash">
 vi /etc/network/interfaces.d/eth0