Template:FriendlyWrt19/zh

From FriendlyELEC WiKi
Revision as of 05:05, 7 February 2020 by Yftan (Talk | contribs) (Work with FriendlyWrt)

Jump to: navigation, search

1 Work with FriendlyWrt

1.1 Introduction to FriendlyWrt

FriendlyWrt is a customized system made by FriendlyElec based on an OpenWrt distribution. It is open source and well suitable for developing IoT applications, NAS applications, smart home gateways etc.

1.2 Account & Password

By default the password is NULL. You can set a password for root for web and SSH login.

1.3 Network Connection

Use a network cable to connect {{{1}}}'s WAN to a master router and the board will get an IP address via DHCP. Login into the router and check {{{1}}}'s IP address.

1.4 Login FriendlyWrt

Type {{{1}}}'s IP address in a browser's address bar and enter to open FriendlyWrt's administration page or you can login into FriendlyWrt's administration page via SSH.

1.5 Install Software Packages

1.5.1 Update Package List

Before install software packages update the package list:

$ opkg update

1.5.2 List Available Packages

$ opkg list

At the time of writing there are 3241 available packages.

1.5.3 List Installed Packages

$ opkg list-installed

1.5.4 Install Packages

$ opkg install <package names>

1.5.5 Remove Packages

$ opkg remove <package names>

1.6 Work with Docker Applications

1.6.1 Docker使用:安装JellyBin影音服务器

mkdir -p /jellyfin/config
mkdir -p /jellyfin/videos
docker run --restart=always -d -p 8096:8096 -v /jellyfin/config:/config -v /jellyfin/videos:/videos jellyfin/jellyfin:10.1.0-arm64 -name myjellyfin

安装完成后,使用8096端口进行访问,效果如下:
FriendlyWrt+JerryFin

1.6.2 Docker使用:安装个人网盘nextcloud

mkdir /nextcloud -p
docker run -d -p 8888:80  --name nextcloud  -v /nextcloud/:/var/www/html/ --restart=always --privileged=true  arm64v8/nextcloud

安装完成后,使用8888端口进行访问。

1.7 启动swap分区

在命令行执行以下命令,然后重启:

/etc/enable-swap.sh
reboot

1.8 挂载smbfs共享资源

mount -t cifs //192.168.1.10/shared /movie -o username=xxx,password=yyy,file_mode=0644

1.9 编译FriendlyWrt

请参考: How to Build FriendlyWrt/zh