Difference between revisions of "Template:FriendlyCoreS5Pxx18"

From FriendlyELEC WiKi
Jump to: navigation, search
(updated by API)
(updated by API)
 
(4 intermediate revisions by the same user not shown)
Line 29: Line 29:
 
===Connect to DVP Camera CAM500B===
 
===Connect to DVP Camera CAM500B===
 
The CAM500B camera module is a 5M-pixel camera with DVP interface. For more tech details about it you can refer to [[Matrix - CAM500B]].<br>
 
The CAM500B camera module is a 5M-pixel camera with DVP interface. For more tech details about it you can refer to [[Matrix - CAM500B]].<br>
From the command line, enter the following command to preview the video:
+
Enter the following command to preview the video:
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
 
gst-launch-1.0 -e v4l2src device=/dev/video6 ! video/x-raw,format=I420,framerate=30/1,width=1280,height=720 ! nxvideosink
 
gst-launch-1.0 -e v4l2src device=/dev/video6 ! video/x-raw,format=I420,framerate=30/1,width=1280,height=720 ! nxvideosink
 
</syntaxhighlight>
 
</syntaxhighlight>
Command line enter the following command to start recording (VPU hardware encoding):
+
Enter the following command to start recording (VPU hardware encoding):
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
 
gst-launch-1.0 -e v4l2src device=/dev/video6 ! video/x-raw,format=I420,framerate=30/1,width=1280,height=720 ! tee name=t t. \
 
gst-launch-1.0 -e v4l2src device=/dev/video6 ! video/x-raw,format=I420,framerate=30/1,width=1280,height=720 ! tee name=t t. \
Line 64: Line 64:
 
/sys/class/i2c-dev/i2c-3/device/3-002d/wakealarm<br>
 
/sys/class/i2c-dev/i2c-3/device/3-002d/wakealarm<br>
 
your board may be it does not support this feature.
 
your board may be it does not support this feature.
 +
 +
===Installing and Using OpenCV 4.1.2===
 +
OpenCV has been pre-installed in FriendlyCore (Version after 20191126) and does not require manual installation.<br />
 +
Please refre this link: https://github.com/friendlyarm/install-opencv-on-friendlycore/blob/s5pxx18/README.md
 +
<br>
 +
Quick test:
 +
<syntaxhighlight lang="bash">
 +
. /usr/bin/cv-env.sh
 +
. /usr/bin/setqt5env-eglfs
 +
cd /usr/local/share/opencv4/samples/python
 +
python3 turing.py
 +
</syntaxhighlight>
 +
 +
===Installing and Using Caffe===
 +
<syntaxhighlight lang="bash">
 +
git clone https://github.com/friendlyarm/install-caffe-on-friendlycore
 +
cd install-caffe-on-friendlycore
 +
sudo ./install-caffe.sh
 +
</syntaxhighlight>

Latest revision as of 11:20, 27 November 2019

1 Run Qt 5.10.0 Demo with GPU acceleration

Run the following command

$ sudo qt5demo

S5pxx18-QtE

2 Run Qt 5.10.0 Demo with OpenGL

Run the following command

. setqt5env
cd $QTDIR
cd /examples/opengl/qopenglwidget
./qopenglwidget

For more Qt 5.10.0 examples, please go to:
cd $QTDIR/examples/

3 Play HD Video with Hardware-decoding

gst-player is console player, it base on GStreamer, support VPU with Hardware-decoding:

sudo gst-player /home/pi/demo.mp4

The equivalent gsteamer command is as follows:

sudo gst-launch-1.0 filesrc location=/home/pi/demo.mp4 ! qtdemux name=demux demux. ! queue ! faad ! audioconvert ! audioresample ! alsasink device="hw:0,DEV=1" demux. ! queue ! h264parse ! nxvideodec ! nxvideosink dst-x=0 dst-y=93 dst-w=1280 dst-h=533

4 Connect to DVP Camera CAM500B

The CAM500B camera module is a 5M-pixel camera with DVP interface. For more tech details about it you can refer to Matrix - CAM500B.
Enter the following command to preview the video:

gst-launch-1.0 -e v4l2src device=/dev/video6 ! video/x-raw,format=I420,framerate=30/1,width=1280,height=720 ! nxvideosink

Enter the following command to start recording (VPU hardware encoding):

gst-launch-1.0 -e v4l2src device=/dev/video6 ! video/x-raw,format=I420,framerate=30/1,width=1280,height=720 ! tee name=t t. \
 ! queue ! nxvideosink t. ! queue ! nxvideoenc bitrate=12000000 ! mp4mux ! \
 filesink location=result_720.mp4

5 Power Off and Schedule Power On

“PMU Power Management” feature helps us to auto power on the board at a specific time, it is implemented by an MCU, support software power-off, and RTC alarm power-up functions.

Here’s a simple guide:
Turn on automatically after 100 seconds. (Time must be greater than 60 seconds.):

$ sudo echo 100 > /sys/class/i2c-dev/i2c-3/device/3-002d/wakealarm

After setting up the automatic boot, turn off board with the 'poweroff’ command:

$ sudo poweroff

Cancel automatic boot:

$ sudo echo 0 > /sys/class/i2c-dev/i2c-3/device/3-002d/wakealarm

Query the current settings, in the front is current time, followed by the time of automatic booting: If no automatic boot is set, it will display "disabled”.

$ sudo cat /sys/class/i2c-dev/i2c-3/device/3-002d/wakealarm


Note that some older versions of hardware may not support this feature, if you don't see this file node in your system:
/sys/class/i2c-dev/i2c-3/device/3-002d/wakealarm
your board may be it does not support this feature.

6 Installing and Using OpenCV 4.1.2

OpenCV has been pre-installed in FriendlyCore (Version after 20191126) and does not require manual installation.
Please refre this link: https://github.com/friendlyarm/install-opencv-on-friendlycore/blob/s5pxx18/README.md
Quick test:

. /usr/bin/cv-env.sh
. /usr/bin/setqt5env-eglfs
cd /usr/local/share/opencv4/samples/python
python3 turing.py

7 Installing and Using Caffe

git clone https://github.com/friendlyarm/install-caffe-on-friendlycore
cd install-caffe-on-friendlycore
sudo ./install-caffe.sh