Difference between revisions of "Template:DebianJessieAllwinnerH3"

From FriendlyELEC WiKi
Jump to: navigation, search
(Connect to DVP Camera CAM500B)
(updated by API)
 
Line 35: Line 35:
 
</syntaxhighlight>
 
</syntaxhighlight>
  
 +
<!--
 
===Check System Information with Rpi-Monitor===
 
===Check System Information with Rpi-Monitor===
 
Our OS contains the Rpi-Monitor utility with which users can check system information and status.<br>
 
Our OS contains the Rpi-Monitor utility with which users can check system information and status.<br>
Line 44: Line 45:
 
[[File:rpi-monitor.png|frameless|500px|rpi-monitor]] <br>
 
[[File:rpi-monitor.png|frameless|500px|rpi-monitor]] <br>
 
Users can easily check these system information and status.
 
Users can easily check these system information and status.
 
+
-->
 
===Test GPU===
 
===Test GPU===
 
Note: this function is only supported in Allwinner Linux-3.4.y.<br>
 
Note: this function is only supported in Allwinner Linux-3.4.y.<br>

Latest revision as of 05:30, 11 June 2018

1 Connect to DVP Camera CAM500B

The CAM500B camera module is a 5M-pixel camera with DVP interface. For more tech details about it you can refer to Matrix - CAM500B.
connect your H3 board to a CAM500B. Then boot OS, connect your board to a network, log into the board as root and run "mjpg-streamer":

$ cd /root/mjpg-streamer
$ make
$ ./start.sh

The mjpg-streamer application is an open source video steam server. After it is successfully started the following messages will be popped up:

 
 i: Using V4L2 device.: /dev/video0
 i: Desired Resolution: 1280 x 720
 i: Frames Per Second.: 30
 i: Format............: YUV
 i: JPEG Quality......: 90
 o: www-folder-path...: ./www/
 o: HTTP TCP port.....: 8080
 o: username:password.: disabled
 o: commands..........: enabled

In our case the board's IP address was 192.168.1.230. We typed 192.168.1.230:8080 in a browser and were able to view the images taken from the camera's. Here is what you would expect to observe:
mjpg-streamer-cam500a
The mjpg-streamer utility uses libjpeg to software-encode steam data. The Linux-4.x based ROM currently doesn't support hardware-encoding. If you use a Linux-3.x based ROM you can use the ffmpeg utility to hardware-encode stream data and this can greatly release CPU's resources and speed up encoding:

$ ffmpeg -t 30 -f v4l2 -channel 0 -video_size 1280x720 -i /dev/video0 -pix_fmt nv12 -r 30 \
        -b:v 64k -c:v cedrus264 test.mp4

By default it records a 30-second video. Typing "q" stops video recording. After recording is stopped a test.mp4 file will be generated.

2 Check CPU's Working Temperature

You can use the following command to read H3's temperature and frequency

cpu_freq

3 Test GPU

Note: this function is only supported in Allwinner Linux-3.4.y.
After OS loads please login from a terminal and run the following command:

glmark2-es2

m1-gpu-glmark2

4 Test VPU

Note: this function is only supported in Allwinner Linux-3.4.y
Visit this link download link to download files
After OS is loaded login from a terminal and run the following commands:

$ sudo apt-get install mpv
$ video_play mpv ./big_buck_bunny_1080p_H264_AAC_25fps_7200K.MP4

In our test it could do hard coding and play 1080P video fluently.