Difference between revisions of "Template:BurnLinuxToEMMC-RK3588"

From FriendlyELEC WiKi
Jump to: navigation, search
(updated by API)
(updated by API)
Line 8: Line 8:
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
   | rk3588-sd-friendlywrt-21.02-YYYYMMDD.img.gz
+
   | rk3NNN-sd-friendlywrt-21.02-YYYYMMDD.img.gz
|-
+
  | rk3588-sd-friendlywrt-21.02-docker-YYYYMMDD.img.gz
+
|-
+
  | rk3588-sd-friendlywrt-22.03-YYYYMMDD.img.gz
+
|-
+
  | rk3588-sd-friendlywrt-22.03-docker-YYYYMMDD.img.gz
+
 
|}
 
|}
 
If the file is in 7z, zip or rar format, you will need to extract it first. If the file is too large to write, you can compress it into .gz format and try again.
 
If the file is in 7z, zip or rar format, you will need to extract it first. If the file is too large to write, you can compress it into .gz format and try again.
Line 21: Line 15:
 
* This method firstly boots a mini Linux from a TF card and then automatically runs an EFlasher utility to install the OS to eMMC.<br />
 
* This method firstly boots a mini Linux from a TF card and then automatically runs an EFlasher utility to install the OS to eMMC.<br />
 
* You can connect your system to an HDMI monitor and watch its progress. This is optional. You can watch its progress by observing its LEDs as well.<br />
 
* You can connect your system to an HDMI monitor and watch its progress. This is optional. You can watch its progress by observing its LEDs as well.<br />
Visit [http://download.friendlyelec.com/{{#replace:{{#replace:{{BASEPAGENAME}}| |}}|/zh|}} download link] to download the needed utilities and image file:<br />
+
* By default, flashing starts automatically. If you want to change it to manual, you can use a image file with the word "multiple-os" in the file name. [[EFlasher/zh|EFlasher]] will stay in the OS selection interface and you need to use Use the mouse to select the OS you want to burn. <br />
{| class="wikitable"
+
<br/>
|-
+
  | colspan=2 | '''Image File'''
+
|-
+
  | rk3588-eflasher-friendlywrt-21.02-YYYYMMDD.img.gz
+
  | [[How to Build FriendlyWrt|FriendlyWrt]],based on OpenWrt 21.02, kernel version 5.10.y
+
|-
+
  | rk3588-eflasher-friendlywrt-21.02-docker-YYYYMMDD.img.gz
+
  | [[How to Build FriendlyWrt|FriendlyWrt]], pre-installed Docker, based on OpenWrt 21.02, kernel version 5.10.y
+
|-
+
  | rk3588-eflasher-friendlywrt-22.03-YYYYMMDD.img.gz
+
  | [[How to Build FriendlyWrt|FriendlyWrt]], based on OpenWrt 22.03, kernel version 5.10.y
+
|-
+
  | rk3588-eflasher-friendlywrt-22.03-docker-YYYYMMDD.img.gz
+
  | [[How to Build FriendlyWrt|FriendlyWrt]], pre-installed Docker, based on OpenWrt 22.03, kernel version 5.10.y
+
|-
+
  | rk3588-eflasher-debian-bullseye-core-5.10-arm64-YYYYMMDD.img.gz
+
  | Debian 11(Bullseye) Core, No desktop environment, command line only<br />Kernel version 5.10.y
+
|-
+
  | rk3588-eflasher-debian-bullseye-minimal-5.10-arm64-YYYYMMDD.img.gz
+
  | Debian 11(Bullseye) Desktop, Uses Xfce as default desktop<br />No pre-installed recommended software, supports hardware acceleration, kernel version 5.10.y
+
|-
+
  | rk3588-eflasher-debian-bullseye-desktop-5.10-arm64-YYYYMMDD.img.gz
+
  | Debian 11(Bullseye) Desktop, uses Xfce as default desktop, pre-installed mpv, smplayer and chromium brower, supports hardware acceleration, kernel version 5.10.y
+
|-
+
  | rk3588-eflasher-androidtv-YYYYMMDD.img.zip
+
  | Android TV
+
|-
+
  | rk3588-eflasher-android12-YYYYMMDD.img.zip
+
  | Android 12 (Tablet)
+
|-
+
  | rk3588-eflasher-ubuntu-focal-desktop-5.10-arm64-YYYYMMDD.img.gz
+
  | Ubuntu20.04(Focal) Desktop, uses LXQT as default desktop, pre-installed mpv, smplayer and chromium brower, supports hardware acceleration, kernel version 5.10.y
+
|-
+
  | rk3588-eflasher-ubuntu-jammy-desktop-arm64-YYYYMMDD.img.gz
+
  | Ubuntu 22.04 with GNOME and Wayland, pre-installed web browser and other recommended software, kernel version 5.10.y
+
|-
+
  | rk3588-eflasher-ubuntu-jammy-minimal-arm64-YYYYMMDD.img.gz
+
  | Lightweight Ubuntu 22.04 with GNOME and Wayland, recommended software is not included, kernel version 5.10.y
+
|-
+
  | rk3588-eflasher-ubuntu-jammy-x11-desktop-arm64-YYYYMMDD.img.gz
+
  | Ubuntu 22.04 with Xubuntu and X11, pre-installed Panfrost GPU driver and other recommended software, kernel version 5.10.y
+
|-
+
  | rk3588-eflasher-friendlycore-focal-5.10-arm64-YYYYMMDD.img.gz
+
  | 64-bit FriendlyCore image file,pre-installed Qt5, based on Ubuntu core 20.04, kernel version 5.10.y
+
|-
+
  | colspan=2 | '''Other:'''
+
|-
+
  | rk3588-eflasher-multiple-os-YYYYMMDD-25g.img.gz
+
  | Multiple operating systems are included, you need to connect a monitor and mouse when booting, and select the operating system you want to burn on the interface
+
|-
+
  | colspan=2 | '''Flash Utility:'''
+
|-
+
  | win32diskimager.rar
+
  | Windows utility. Under Linux users can use "dd"
+
|}
+
 
Here are the steps:<br />
 
Here are the steps:<br />
 
* Get an SDHC card with a minimum capacity of 8G
 
* Get an SDHC card with a minimum capacity of 8G
* Download a rk3588-eflasher-OSNAME-YYYYMMDD.img.gz image file and a win32diskimager;
+
* Visit [http://download.friendlyelec.com/{{#replace:{{#replace:{{BASEPAGENAME}}| |}}|/zh|}} download link]to download image files (in the "01_Official images/02_SD-to-eMMC images" directory) and win32diskimager tool (in the "05_Tools" directory);
* Under Windows, run win32diskimager as administrator, select your SD card and extracted [[EFlasher/zh|EFlasher]] image file, and click on “Write” to write image file on the SD card; or under Linux, you use the dd command to write the rk3588-eflasher-OSNAME-YYYYMMDD.img file to the SD card.
+
* Extract the .gz format compressed file to get the .img format image file;
 +
* Run the win32diskimager utility under Windows as administrator. On the utility's main window select your SD card's drive, the wanted image file and click on "write" to start flashing the SD card.  
 
* Eject your SD card and insert it to {{{1}}}’s microSD card slot.
 
* Eject your SD card and insert it to {{{1}}}’s microSD card slot.
 
* Turn on {{{1}}}, it will boot from the SD card and automatically run [[EFlasher/zh|EFlasher]] to install the OS to the board’s eMMC. You connect your board to an HDMI monitor or observer the board’s LEDs to watch its installation progress   
 
* Turn on {{{1}}}, it will boot from the SD card and automatically run [[EFlasher/zh|EFlasher]] to install the OS to the board’s eMMC. You connect your board to an HDMI monitor or observer the board’s LEDs to watch its installation progress   
Line 156: Line 96:
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
   | rk3588-sd-friendlywrt-22.03-YYYYMMDD.img.gz
+
   | rk3NNN-sd-friendlywrt-21.02-YYYYMMDD.img.gz
|-
+
  | rk3588-sd-friendlywrt-22.03-docker-YYYYMMDD.img.gz
+
|-
+
  | rk3588-sd-friendlywrt-21.02-YYYYMMDD.img.gz
+
|-
+
  | rk3588-sd-friendlywrt-21.02-docker-YYYYMMDD.img.gz
+
|-
+
  | rk3588-sd-ubuntu-jammy-desktop-5.10-arm64-20221029.img.gz
+
 
|}
 
|}
 
4) Eject the TF card, insert the TF card to {{{1}}}, power it on it will automatically install your firmware. You can watch the installation progress by observing the LEDs’ status.<br />
 
4) Eject the TF card, insert the TF card to {{{1}}}, power it on it will automatically install your firmware. You can watch the installation progress by observing the LEDs’ status.<br />
Line 202: Line 134:
 
Go to “Upgrade Firmware(升级固件)”, click on “Firmware(固件)”, select your wanted image file, and click on “Upgrade(升级)” to install. After installation is done, your board will reboot automatically and load the system from eMMC;<br />
 
Go to “Upgrade Firmware(升级固件)”, click on “Firmware(固件)”, select your wanted image file, and click on “Upgrade(升级)” to install. After installation is done, your board will reboot automatically and load the system from eMMC;<br />
 
* Option 2: Install OS that is packaged & placed in multiple partition images<br />
 
* Option 2: Install OS that is packaged & placed in multiple partition images<br />
Go to [http://download.friendlyelec.com/{{#replace:{{#replace:{{BASEPAGENAME}}| |}}|/zh|}} network drive] to download your needed package and extract it.
+
Go to [http://download.friendlyelec.com/{{#replace:{{#replace:{{BASEPAGENAME}}| |}}|/zh|}} network drive] to download your needed package and extract it (in the "01_Official images/03_USB upgrade images).
{| class="wikitable"
+
|-
+
  | colspan=2 | '''Image File'''
+
|-
+
  | rk3588-usb-friendlywrt-21.02-YYYYMMDD.zip
+
  | '''[[How to Build FriendlyWrt|FriendlyWrt]]'''<br/>Based on OpenWrt 21.02<br />Kernel version 5.10.y
+
|-
+
  | rk3588-usb-friendlywrt-21.02-docker-YYYYMMDD.zip
+
  | '''[[How to Build FriendlyWrt|FriendlyWrt]]'''<br/>Pre-installed Docker<br />Based on OpenWrt 21.02<br />Kernel version 5.10.y
+
|-
+
  | rk3588-usb-friendlywrt-22.03-YYYYMMDD.zip
+
  | '''[[How to Build FriendlyWrt|FriendlyWrt]]'''<br/>Based on OpenWrt 22.03<br />Kernel version 5.10.y
+
|-
+
  | rk3588-usb-friendlywrt-22.03-docker-YYYYMMDD.zip
+
  | '''[[How to Build FriendlyWrt|FriendlyWrt]]'''<br/>Pre-installed Docker<br />Based on OpenWrt 22.03<br />Kernel version 5.10.y
+
|-
+
  | rk3588-usb-debian-bullseye-core-arm64-YYYYMMDD.zip
+
  | '''Debian 11(Bullseye) Core'''<br />No desktop environment, command line only<br />Kernel version 5.10.y
+
|-
+
  | rk3588-usb-debian-bullseye-minimal-arm64-YYYYMMDD.zip
+
  | '''Debian 11(Bullseye) Desktop'''<br />Uses Xfce as default desktop<br />No pre-installed recommended software<br />Supports hardware acceleration<br >Kernel version 5.10.y
+
|-
+
  | rk3588-usb-debian-bullseye-desktop-arm64-YYYYMMDD.zip
+
  | '''Debian 11(Bullseye) Desktop'''<br />Uses Xfce as default desktop<br />Pre-installed mpv, smplayer and chromium brower<br />Supports hardware acceleration<br >Kernel version 5.10.y
+
|-
+
  | rk3588-usb-androidtv-YYYYMMDD.img.zip
+
  | '''Android TV'''
+
|-
+
  | rk3588-usb-android12-YYYYMMDD.img.zip
+
  | '''Android 12 (Tablet)'''
+
|-
+
  | rk3588-usb-ubuntu-focal-desktop-5.10-arm64-YYYYMMDD.zip
+
  | '''Ubuntu20.04(Focal) Desktop'''<br />Uses LXQT as default desktop<br />Pre-installed mpv, smplayer and chromium brower<br />Supports hardware acceleration<br >Kernel version 5.10.y
+
|-
+
  | rk3588-usb-ubuntu-jammy-desktop-arm64-YYYYMMDD.zip
+
  | Ubuntu 22.04 with GNOME and Wayland<br />Pre-installed web browser and other recommended software<br />kernel version 5.10.y
+
|-
+
  | rk3588-usb-ubuntu-jammy-minimal-arm64-YYYYMMDD.zip
+
  | Lightweight Ubuntu 22.04 with GNOME and Wayland<br />Recommended software is not included<br />kernel version 5.10.y
+
|-
+
  | rk3588-usb-ubuntu-jammy-x11-desktop-arm64-YYYYMMDD.zip
+
  | Ubuntu 22.04 with Xubuntu and X11<br />Pre-installed Panfrost GPU driver and other recommended software<br />kernel version 5.10.y
+
|-
+
  | rk3588-usb-friendlycore-focal-5.10-arm64-YYYYMMDD.zip
+
  | 64-bit FriendlyCore image file,pre-installed Qt5, based on Ubuntu core 20.04, kernel version 5.10.y
+
|}
+
 
After it is extracted, you will see some utilities and a configuration file under the directory. double click on RKDevTool.exe, you will see a “Found a new Maskrom device” message on the utility. Click on the “Execute”, wait a moment and it will be installed. After installation is done your system will automatically reboot and load the system from eMMC.<br />
 
After it is extracted, you will see some utilities and a configuration file under the directory. double click on RKDevTool.exe, you will see a “Found a new Maskrom device” message on the utility. Click on the “Execute”, wait a moment and it will be installed. After installation is done your system will automatically reboot and load the system from eMMC.<br />

Revision as of 16:46, 1 August 2023

1 Install OS to eMMC

1.1 Option 1: Install OS on Web Page

Get a TF card which has been installed with FriendlyWrt, log in FriendlyWrt on the web page, click on “System” ->”eMMC Tools”. Click on “Select file” to select your wanted image file, either an official image (the name might start with “rk3588-sd”) or a third party image. The file should be a “.gz” or “.img” file.
After a file is selected, click on “Upload and Write” to start installing an OS.
Friendlywrt-emmctools2-en.png
After installation is done, eject the SD card, the system will automatically reboot and load the OS from eMMC. After the OS begins to load, if the system LED is flashing and the network LED is on, it means the the OS has loaded successfully. If the OS is FriendlyWrt, you can click on “Go to Homepage” to enter the homepage.
Note that if you are burning the FriendlyElec firmware, you need to use an image file with the "-sd-" file name, similar to the one below:

rk3NNN-sd-friendlywrt-21.02-YYYYMMDD.img.gz

If the file is in 7z, zip or rar format, you will need to extract it first. If the file is too large to write, you can compress it into .gz format and try again.

1.2 Option 2: Install OS via TF Card
1.2.1 Install OS to eMMC
  • This method firstly boots a mini Linux from a TF card and then automatically runs an EFlasher utility to install the OS to eMMC.
  • You can connect your system to an HDMI monitor and watch its progress. This is optional. You can watch its progress by observing its LEDs as well.
  • By default, flashing starts automatically. If you want to change it to manual, you can use a image file with the word "multiple-os" in the file name. EFlasher will stay in the OS selection interface and you need to use Use the mouse to select the OS you want to burn.


Here are the steps:

  • Get an SDHC card with a minimum capacity of 8G
  • Visit download linkto download image files (in the "01_Official images/02_SD-to-eMMC images" directory) and win32diskimager tool (in the "05_Tools" directory);
  • Extract the .gz format compressed file to get the .img format image file;
  • Run the win32diskimager utility under Windows as administrator. On the utility's main window select your SD card's drive, the wanted image file and click on "write" to start flashing the SD card.
  • Eject your SD card and insert it to {{{1}}}’s microSD card slot.
  • Turn on {{{1}}}, it will boot from the SD card and automatically run EFlasher to install the OS to the board’s eMMC. You connect your board to an HDMI monitor or observer the board’s LEDs to watch its installation progress
  • After installation is done, power off the board, eject the SD card from {{{1}}}, power on the board again, {{{1}}} will load the OS from its eMMC
1.2.2 Install Flash Image File to eMMC
  • Auto Install (Default Behavior)

1) Download an “eflasher” firmware from network drive, extract it and install it to a TF card ;
2) Eject and insert the TF card to your PC, after a “FriendlyARM” device shows up(Under Linux, it is a “FriendlyARM” directory), copy an .img or .gz file to the TF card.
3) Open the eflasher.conf file on the TF card, set “autoStart=” to the name of your image file, such as:

autoStart=openwrt-rockchip-armv8_nanopi-ext4-sysupgrade.img.gz

Anyone of the files that contain “-sd-” will work. Here is a list:

rk3NNN-sd-friendlywrt-21.02-YYYYMMDD.img.gz

4) Eject the TF card, insert the TF card to {{{1}}}, power it on it will automatically install your firmware. You can watch the installation progress by observing the LEDs’ status.

  • Disable Auto Installation

If you want to disable auto installation, please open the eflasher.conf file, set “autoStart=” to empty:

autoStart=

In this case, after the system boots, it will stay at the step where you are expected to select an image file. You need to connect an HDMI monitor and a USB mouse to your board and install a firmware on its UI;

1.3 Option 3: Install OS via USB
1.3.1 Step 1: Install USB Driver and Tools/Utilities

Download a driver file DriverAssitant_v5.1.1.zip under the “tools” directory from network drive, extract and install it.
Under the same directory, download a utility RKDevTool_Release_v2.84.zip and extract it.

1.3.2 Step 2: Connect {{{1}}} to PC and Enter Installation Mode

1) Disconnect the connected USB cable and the power cord from {{{1}}}, eject the TF card;
2) Press and hold the “Mask” key, power on the board. After the status LED has been on for at least 3 seconds, release the Mask key.


1.3.3 Step 3: Install image to eMMC

A firmware in general is packaged in either of the two options: the first is an whole image (ie, update.img) which is often offered by third party developers, the second is that an image is packaged and placed in multiple partition images. FriendlyElec offers an image in the latter option.

  • Option 1: Install whole image (ie, update.img)

On a PC which has the extracted RKDevTool_Release_v2.84 utility, go to the RKDevTool_Release_v2.84 directory, run the RKDevTool.exe file. If everything works, you will see a “Found a new Maskrom device” message on the utility;
Go to “Upgrade Firmware(升级固件)”, click on “Firmware(固件)”, select your wanted image file, and click on “Upgrade(升级)” to install. After installation is done, your board will reboot automatically and load the system from eMMC;

  • Option 2: Install OS that is packaged & placed in multiple partition images

Go to network drive to download your needed package and extract it (in the "01_Official images/03_USB upgrade images). After it is extracted, you will see some utilities and a configuration file under the directory. double click on RKDevTool.exe, you will see a “Found a new Maskrom device” message on the utility. Click on the “Execute”, wait a moment and it will be installed. After installation is done your system will automatically reboot and load the system from eMMC.