Difference between revisions of "PWM/zh"

From FriendlyELEC WiKi
Jump to: navigation, search
(updated by API)
(Replaced content with "English<br> TODO")
Line 1: Line 1:
[[PWM|English]]
+
[[PWM|English]]<br>
===H3上配置SYS_PWM===
+
TODO
====先确定内核已经打了这个补丁====
+
<syntaxhighlight lang="bash">
+
https://github.com/torvalds/linux/commit/179a79fd740b6b2f66b64bae5cb6ecd483987d20
+
</syntaxhighlight>
+
注: FriendlyELEC的内核源代码分支 https://github.com/friendlyarm/linux/tree/sunxi-4.14.y 已包含此提交。
+
====修改内核dts配置, 启用SYS_PWM (在NanoPi NEO上, 引脚与POWER LED复用)====
+
参考以下补丁, 配置POWER LED对应的引脚为PWM功能,然后编译并测试:
+
<syntaxhighlight lang="bash">
+
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
+
index b9826c150c0a..ca62502ad9a3 100644
+
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
+
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
+
@@ -45,6 +45,10 @@
+
/ {
+
        model = "FriendlyElec NanoPi-NEO";
+
        compatible = "friendlyelec,nanopi-neo", "allwinner,sun8i-h3";
+
+
+
+      aliases {
+
+              pwm1 = &r_pwm;
+
+      };
+
};
+
+
&emac {
+
@@ -52,4 +56,14 @@
+
        phy-mode = "mii";
+
        allwinner,leds-active-low;
+
        status = "okay";
+
-};
+
\ No newline at end of file
+
+};
+
+
+
+&gpio_leds {
+
+      pinctrl-0 = <&leds_npi>;
+
+
+
+      /delete-node/ pwr;
+
+};
+
+
+
+&r_pwm {
+
+      status = "okay";
+
+};
+
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
+
index 5eeb41744735..1802f8ca2c56 100644
+
--- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
+
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
+
@@ -89,7 +89,7 @@
+
                };
+
        };
+
       
+
-      leds {
+
+      gpio_leds: leds {
+
                compatible = "gpio-leds";
+
                pinctrl-names = "default";
+
                pinctrl-0 = <&leds_npi>, <&leds_r_npi>;
+
</syntaxhighlight>
+
====测试脚本====
+
在NanoPi NEO上测试, 可看到POWER LED以淡出效果闪烁10次:
+
<syntaxhighlight lang="bash">
+
#!/bin/bash
+
 
+
sys_pwm=/sys/class/pwm/pwmchip0
+
 
+
[ -d $sys_pwm ] || exit 1
+
 
+
if [ ! -d $sys_pwm/pwm0 ]; then
+
    echo 0 > $sys_pwm/export
+
fi
+
 
+
echo 1000 > $sys_pwm/pwm0/period
+
echo 1 > $sys_pwm/pwm0/enable
+
 
+
for n in $(seq 10); do
+
    for d in $(seq 0 50 1000); do
+
        echo $d > $sys_pwm/pwm0/duty_cycle
+
        sleep .02
+
    done
+
    sleep 1
+
done
+
</syntaxhighlight>
+

Revision as of 23:53, 5 January 2022

English
TODO