NanoPi M4 SATA HAT

From FriendlyELEC WiKi
Revision as of 05:27, 8 May 2019 by Yonganch (Talk | contribs) (Features)

Jump to: navigation, search

Features

Back
  • SATA
    • Use Marvell 88SE9215 Four-Port 6 Gbps SATA I/O Controller
    • Four Sata Ports. It supports three communication rates: 6 Gbps, 3 Gbps, and 1.5 Gbps
    • One 4-Pin power connector. It includes a 12V and a 5V outputs and is able to carry large currents
    • Four LEDs for indicating the status of each sata port
  • Power
    • Two 12V Power Input options. It includes a 5.5*2.1mm DC-Jack and a 5566-04A connector
    • The output current of the 12V to 5V DC/DC regulator is up to 8A
    • One PowerKey button and PowerKey jumper
  • USB
    • Two 4-PIN PH2.0 USB 2.0 host connectors.
  • Heat dissipation
    • Two PCB nuts for mounting a heatsink above the PCIe to SATA brigde
    • One 2-PIN PH2.0 connector for fan. The 12V output is modulated by PWM1
  • GPIO
    • ALL the signals of the NanoPi M4's 40-PIN connector are populated
  • About Power Supply
Overview
Front
Back