Difference between revisions of "NanoPi M4 SATA HAT"

From FriendlyELEC WiKi
Jump to: navigation, search
(Spec)
(Block)
 
(18 intermediate revisions by 2 users not shown)
Line 1: Line 1:
==Spec==
+
==Features==
 +
[[File:M4_SATA_HAT_layout.jpg||thumb|Back]]
 
* '''SATA'''
 
* '''SATA'''
** Four Sata Ports, Supports communication speeds of 6 Gbps, 3 Gbps, and 1.5 Gbps
+
** Use Marvell 88SE9215 Four-Port 6 Gbps SATA I/O Controller
** One 4-Pin power connector, include 12V and 5V output, which is able to carry large current
+
** Four Sata Ports. It supports three communication rates: 6 Gbps, 3 Gbps, and 1.5 Gbps
** Four LEDs for Indicating status of each Sata Port
+
** One 4-Pin power connector. It includes a 12V and a 5V outputs and is able to carry large currents
 +
** Four LEDs for indicating the status of each sata port
 
* '''Power'''
 
* '''Power'''
** Two 12V Power Input options, include one DC-Jack and one 5566-04A Connector
+
** Two 12V Power Input options. It includes a 5.5*2.1mm DC-Jack and a 5566-04A connector
** Output current of 12V to 5V DC/DC regulator is up to 8A
+
** The output current of the 12V to 5V DC/DC regulator is up to 8A
 
** One PowerKey button and PowerKey jumper
 
** One PowerKey button and PowerKey jumper
 
* '''USB'''
 
* '''USB'''
** Two 4-PIN PH2.0 USB 2.0 host connector
+
** Two 4-PIN PH2.0 USB 2.0 host connectors.
 
* '''Heat dissipation'''
 
* '''Heat dissipation'''
** Two PCB nuts for mounting heatsink above the PCIe to SATA brigde
+
** Two PCB nuts for mounting a heatsink above the PCIe to SATA brigde
** One 2-PIN PH2.0 connector for fan. 12V output and modulated by PWM1
+
** One 2-PIN PH2.0 connector for fan. The 12V output is modulated by PWM1
 +
* '''GPIO'''
 +
** ALL the signals of the NanoPi M4's 40-PIN connector are populated
 +
* '''About Power Supply'''
 +
** To drive one or two hard disk, We recommend our 12V 2A Universal Power Adapter https://www.friendlyarm.com/index.php?route=product/product&path=73&product_id=233
 +
** To drive four hard disk, We recommend PC Power
 +
 
 +
[[File:NanoPi_M4_SATA_HAT-01B.jpg||thumb|Overview]][[File:NanoPi_M4_SATA_HAT-A01.jpg||thumb|Front]][[File:NanoPi_M4_SATA_HAT-B01.jpg||thumb|Back]]
 +
 
 +
==Block==
 +
[[File:M4_SATA_HAT_Block.jpg|600px]]
 +
 
 +
==Resources==
 +
* 2D CAD file [http://wiki.friendlyarm.com/wiki/images/3/32/M4_SATA_HAT_2D_DWG.zip M4_SATA_HAT_2D_DWG.zip]

Latest revision as of 08:56, 14 June 2019

1 Features

Back
  • SATA
    • Use Marvell 88SE9215 Four-Port 6 Gbps SATA I/O Controller
    • Four Sata Ports. It supports three communication rates: 6 Gbps, 3 Gbps, and 1.5 Gbps
    • One 4-Pin power connector. It includes a 12V and a 5V outputs and is able to carry large currents
    • Four LEDs for indicating the status of each sata port
  • Power
    • Two 12V Power Input options. It includes a 5.5*2.1mm DC-Jack and a 5566-04A connector
    • The output current of the 12V to 5V DC/DC regulator is up to 8A
    • One PowerKey button and PowerKey jumper
  • USB
    • Two 4-PIN PH2.0 USB 2.0 host connectors.
  • Heat dissipation
    • Two PCB nuts for mounting a heatsink above the PCIe to SATA brigde
    • One 2-PIN PH2.0 connector for fan. The 12V output is modulated by PWM1
  • GPIO
    • ALL the signals of the NanoPi M4's 40-PIN connector are populated
  • About Power Supply
Overview
Front
Back

2 Block

M4 SATA HAT Block.jpg

3 Resources