Difference between revisions of "NanoPi M4 SATA HAT"
From FriendlyELEC WiKi
(→Features) |
(→Features) |
||
| Line 17: | Line 17: | ||
* '''GPIO''' | * '''GPIO''' | ||
** ALL the signals of the NanoPi M4's 40-PIN connector are populated | ** ALL the signals of the NanoPi M4's 40-PIN connector are populated | ||
| + | * '''Power Supply'' | ||
| + | ** If connect one or two hard disk, We recommend our 12V 2A Universal Power Adapter https://www.friendlyarm.com/index.php?route=product/product&path=73&product_id=233 | ||
| + | |||
[[File:NanoPi_M4_SATA_HAT-01B.jpg||thumb|Overview]][[File:NanoPi_M4_SATA_HAT-A01.jpg||thumb|Front]][[File:NanoPi_M4_SATA_HAT-B01.jpg||thumb|Back]] | [[File:NanoPi_M4_SATA_HAT-01B.jpg||thumb|Overview]][[File:NanoPi_M4_SATA_HAT-A01.jpg||thumb|Front]][[File:NanoPi_M4_SATA_HAT-B01.jpg||thumb|Back]] | ||
Revision as of 05:22, 8 May 2019
Features
- SATA
- Use Marvell 88SE9215 Four-Port 6 Gbps SATA I/O Controller
- Four Sata Ports. It supports three communication rates: 6 Gbps, 3 Gbps, and 1.5 Gbps
- One 4-Pin power connector. It includes a 12V and a 5V outputs and is able to carry large currents
- Four LEDs for indicating the status of each sata port
- Power
- Two 12V Power Input options. It includes a 5.5*2.1mm DC-Jack and a 5566-04A connector
- The output current of the 12V to 5V DC/DC regulator is up to 8A
- One PowerKey button and PowerKey jumper
- USB
- Two 4-PIN PH2.0 USB 2.0 host connectors.
- Heat dissipation
- Two PCB nuts for mounting a heatsink above the PCIe to SATA brigde
- One 2-PIN PH2.0 connector for fan. The 12V output is modulated by PWM1
- GPIO
- ALL the signals of the NanoPi M4's 40-PIN connector are populated
- 'Power Supply
- If connect one or two hard disk, We recommend our 12V 2A Universal Power Adapter https://www.friendlyarm.com/index.php?route=product/product&path=73&product_id=233
