Difference between revisions of "NanoPi M4 SATA HAT"

From FriendlyELEC WiKi
Jump to: navigation, search
(Features)
Line 12: Line 12:
 
** One PowerKey button and PowerKey jumper
 
** One PowerKey button and PowerKey jumper
 
* '''USB'''
 
* '''USB'''
** Two 4-PIN PH2.0 USB 2.0 host connector
+
** Two 4-PIN PH2.0 USB 2.0 host connector.
* '''Heat dissipation'''
+
* '''Heat dissipation''
 
** Two PCB nuts for mounting heatsink above the PCIe to SATA brigde
 
** Two PCB nuts for mounting heatsink above the PCIe to SATA brigde
 
** One 2-PIN PH2.0 connector for fan. 12V output and modulated by PWM1
 
** One 2-PIN PH2.0 connector for fan. 12V output and modulated by PWM1
 +
* GPIO
 +
** ALL the GPIOs of NanoPi M4 40-PIN connector are available

Revision as of 03:51, 29 January 2019

Features

Overview
Front
Back
  • SATA
    • Four Sata Ports, Supports communication speeds of 6 Gbps, 3 Gbps, and 1.5 Gbps
    • One 4-Pin power connector, include 12V and 5V output, which is able to carry large current
    • Four LEDs for Indicating status of each Sata Port
  • Power
    • Two 12V Power Input options, include one DC-Jack and one 5566-04A Connector
    • Output current of 12V to 5V DC/DC regulator is up to 8A
    • One PowerKey button and PowerKey jumper
  • USB
    • Two 4-PIN PH2.0 USB 2.0 host connector.
  • 'Heat dissipation
    • Two PCB nuts for mounting heatsink above the PCIe to SATA brigde
    • One 2-PIN PH2.0 connector for fan. 12V output and modulated by PWM1
  • GPIO
    • ALL the GPIOs of NanoPi M4 40-PIN connector are available