Difference between revisions of "Matrix - Rotary Encoder"

From FriendlyELEC WiKi
Jump to: navigation, search
(编译运行测试程序)
Line 98: Line 98:
 
|}
 
|}
  
==编译运行测试程序==
+
==Compile & Run Test Program==
启动开发板并运行Debian系统,进入系统后克隆Matrix代码仓库:
+
Boot your ARM board with Debian and copy the matrix code:
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
 
$ apt-get update && apt-get install git
 
$ apt-get update && apt-get install git
 
$ git clone https://github.com/friendlyarm/matrix.git
 
$ git clone https://github.com/friendlyarm/matrix.git
 
</syntaxhighlight>
 
</syntaxhighlight>
克隆完成后会得到一个名为matrix的目录。
+
If your cloning is done successfully a "matrix" directory will be generated.
  
编译并安装Matrix:
+
Compile and install Matrix:
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
 
$ cd matrix
 
$ cd matrix
Line 112: Line 112:
 
</syntaxhighlight>
 
</syntaxhighlight>
  
运行测试程序:
+
Run test program:
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
 
$ matrix-rotary_encoder
 
$ matrix-rotary_encoder
 
</syntaxhighlight>
 
</syntaxhighlight>
注意:此模块并不支持热插拔,启动系统前需要确保硬件连接正确。<br>
+
Note: this module is not plug and play therefore before running the module please make sure it is connected to an ARM board.<br>
运行效果如下:<br>
+
Here is what you should observe:<br>
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
 
Get sw=0 value=1
 
Get sw=0 value=1
Line 125: Line 125:
 
Get sw=0 value=5
 
Get sw=0 value=5
 
</syntaxhighlight>
 
</syntaxhighlight>
旋转模块时,能读到对应的值。
+
Rotating this module will trigger events and generate values.
  
 
==代码说明==
 
==代码说明==

Revision as of 23:58, 23 June 2016

查看中文

1 Introduction

2 Features

File:Matrix-Rotary Encoder PCB.png

  • Pin Description:
Pin Description

3 Basic Device Operation

4 Applications

4.1 Connect to NanoPi M1

Refer to the following connection diagram to connect the module to the NanoPi M1:
Matrix-Rotary_Encoder_nanopi_m1

Connection Details:

Matrix-Rotary_Encoder NanoPi M1
R Pin7
G Pin8
B Pin10
V Pin4
G Pin6

4.2 Connect to NanoPi 2

Refer to the following connection diagram to connect the module to the NanoPi 2:
Matrix-Rotary_Encoder_nanopi_2

Connection Details:

Matrix-Rotary_Encoder NanoPi 2
R Pin7
G Pin8
B Pin10
V Pin4
G Pin6

4.3 Connect to NanoPi M2 / NanoPi 2 Fire

Refer to the following connection diagram to connect the module to the NanoPi M2/ NanoPi 2 Fire:
Matrix-Rotary_Encoder_nanopi_m2

Connection Details:

Matrix-Rotary_Encoder NanoPi M2
R Pin7
G Pin8
B Pin10
V Pin4
G Pin6

4.4 Connect to NanoPC-T2

Refer to the following connection diagram to connect the module to the NanoPC-T2:
Matrix-Rotary_Encoder_NanoPC-T2

Connection Details:

Matrix-Rotary_Encoder NanoPC-T2
R Pin15
G Pin16
B Pin17
V Pin29
G Pin30

5 Compile & Run Test Program

Boot your ARM board with Debian and copy the matrix code:

$ apt-get update && apt-get install git
$ git clone https://github.com/friendlyarm/matrix.git

If your cloning is done successfully a "matrix" directory will be generated.

Compile and install Matrix:

$ cd matrix
$ make && make install

Run test program:

$ matrix-rotary_encoder

Note: this module is not plug and play therefore before running the module please make sure it is connected to an ARM board.
Here is what you should observe:

Get sw=0 value=1
Get sw=0 value=2
Get sw=0 value=3
Get sw=0 value=4
Get sw=0 value=5

Rotating this module will trigger events and generate values.

6 代码说明

所有的开发板都共用一套Matrix代码,本模块的测试示例代码为matrix-rotary_encoder,内容如下:

int main(int argc, char ** argv) 
{ 
    int i = 0;
    int encoderSw = 0;
    int encoderValue = 0;
    int board;
    int swPin = GPIO_PIN(7);
    int siaPin = GPIO_PIN(8);
    int sibPin = GPIO_PIN(10);
 
    if ((board = boardInit()) < 0) {
        printf("Fail to init board\n");
        return -1;
    }
    if (board == BOARD_NANOPI_T2) {
        swPin = GPIO_PIN(15);
        siaPin = GPIO_PIN(16);
        sibPin = GPIO_PIN(17);
    }
    system("modprobe "DRIVER_MODULE);
    if (rotaryEncoderInit(swPin, siaPin, sibPin)) {
        printf("Fail to init rotary encoder\n");
        goto err;
    }
    signal(SIGINT, encoderHandler);
    for (i=0; i<ENCODER_READ_TIMES; i++) {
        rotaryEncoderRead(ENCODER_SW, &encoderSw);
        rotaryEncoderRead(ENCODER_VALUE, &encoderValue);
        printf("Get sw=%d value=%d\n", encoderSw, encoderValue);
        sleep(1);
    }
    rotaryEncoderDeInit();
err:
    system("rmmod "DRIVER_MODULE);
    return 0;
}

API说明参考维基:Matrix API reference manual

7 相关资料