Difference between revisions of "Matrix - MCAM400"

From FriendlyELEC WiKi
Jump to: navigation, search
(IR Cut-Off filter motor driver)
(MIPI interface Pin Spec)
Line 43: Line 43:
 
::{| class="wikitable"
 
::{| class="wikitable"
 
|-
 
|-
|'''Pin#''' ||  '''MIPI-CSI1'''  || '''Description '''   
+
|'''Pin#''' ||  '''Name'''  || '''Description '''   
 
|-
 
|-
 
|1    ||  VDD_5V  ||  5V Power input, 3.6V to 5.5V
 
|1    ||  VDD_5V  ||  5V Power input, 3.6V to 5.5V

Revision as of 10:15, 11 December 2018

查看中文

1 Introduction

MCAM400
MCAM400
MCAM400
  • The MCAM400 module uses Omni Vision's 4MP CMOS OV4689 image sensor. It has MIPI output interface and supports up to 2688 x 1520 photographing and 1920x1080@120fps video recording.

2 Features

  • Omnivision OV4689 4M pixels Sensor
  • 4-lane MIPI interface
  • M12 lens
  • Build in IR Cut-Off filter motor driver
  • Module Size: 38mm x 38mm

3 Sensor Spec

  • Sensor size: 1/3"
  • Active pixels: 2688H x 1520V
  • Pixel size: 2.0 um x 2.0 um
  • Output format: 10-bit RAW RGB
  • Max S/N ratio: 38.3dB
  • Dynamic range:64.6dB@1xgain
  • Sensitivity: 1900mv/lux-sec
  • Temperature range:
    • operating: -30℃ to +85℃ junction temperature
    • stable image: 0℃ to +60℃ junction temperature

4 Lens Spec

  • Focal Length: 3.3 mm
  • Aperture: F2.2
  • MAX FOV: 135℃
  • H/V FOV: 180℃(H), 80℃(V)
  • TV Distortion : < 15%
  • Focusing distance : 2cm to infinity
  • Optical Structure: 4G+IR CUT
  • Thread Size:M12x0.5
  • Barrel Material: Aluminium Alloy

5 Drawing

MCAM400 drawing.png

6 MIPI interface Pin Spec

Connector type : 0.5mm pitch FPC

Pin# Name Description
1 VDD_5V 5V Power input, 3.6V to 5.5V
2 VDD_5V 5V Power input, 3.6V to 5.5V
3 GND Return current path
4 /NC no connection
5 /NC no connection
6 VCC_IO power and reference level for I2C, PWDN, XSHUTDOWN circuit, 1.8V type
7 /NC no connection
8 /NC no connection
9 I2C_SCL I2C clock signal
10 I2C_SDA I2C data signal
11 XSHUTDOWN XSHUTDOWN signal of OV4689 , connect to GPIO
12 /NC no connection
13 GND Return current path
14 EXTCLK EXTCLK to OV4689
15 GND Return current path
16 MIPI_D3P MIPI TX data lane 3 positive output
17 MIPI_D3N MIPI TX data lane 3 negative output
18 GND Return current path
19 MIPI_D2P MIPI TX data lane 2 positive output
20 MIPI_D2N MIPI TX data lane 2 negative output
21 GND Return current path
22 MIPI_D1P MIPI TX data lane 1 positive output
23 MIPI_D1N MIPI TX data lane 1 negative output
24 GND Return current path
25 MIPI_CLKP MIPI TX clock lane positive output
26 MIPI_CLKN MIPI TX clock lane negative output
27 GND Return current path
28 MIPI_D0P MIPI TX data lane 0 positive output
29 MIPI_D0N MIPI TX data lane 0 negative output
30 GND Return current path

7 IR Cut-Off filter motor driver

  • 3.3V,300mA, the circuit is show as below

IR Cut-Off filter motor driver.png

8 Resources