Difference between revisions of "Matrix - LED"

From FriendlyELEC WiKi
Jump to: navigation, search
(特性)
Line 8: Line 8:
 
一个直径为5mm的LED,3-Pin 2.54mm排针,V接电源,G接地,S信号通过一个三极管放大控制LED的导通或关闭。您可以向S输出静态的高低电平信号,也可以输出变化的PWM信号,信号电平可以是3.3V或5V。当您向S输出高电平时LED以最大亮度发光,低电平就完全熄灭,可变占空比的PWM信号可以调节发光的亮度。我们提供红、绿、白三种颜色的配件供您购买。
 
一个直径为5mm的LED,3-Pin 2.54mm排针,V接电源,G接地,S信号通过一个三极管放大控制LED的导通或关闭。您可以向S输出静态的高低电平信号,也可以输出变化的PWM信号,信号电平可以是3.3V或5V。当您向S输出高电平时LED以最大亮度发光,低电平就完全熄灭,可变占空比的PWM信号可以调节发光的亮度。我们提供红、绿、白三种颜色的配件供您购买。
  
==特性==
+
==Features==
* GPIO或PWM控制,3.3/5V电平,亮度通过PWM可调
+
* GPIO/PWM interface, 3.3/5V, PWM brightness control
* 体积小巧, 带固定孔,方便嵌入到外壳
+
* Tiny, easy to be used in various situations
* 2.54mm排针接口,接线方便,通用性强
+
* 2.54mm spacing pin
  
 
==How To==
 
==How To==

Revision as of 07:28, 7 August 2015

查看中文

1 Introduction

LED
LED
LED

一个直径为5mm的LED,3-Pin 2.54mm排针,V接电源,G接地,S信号通过一个三极管放大控制LED的导通或关闭。您可以向S输出静态的高低电平信号,也可以输出变化的PWM信号,信号电平可以是3.3V或5V。当您向S输出高电平时LED以最大亮度发光,低电平就完全熄灭,可变占空比的PWM信号可以调节发光的亮度。我们提供红、绿、白三种颜色的配件供您购买。

2 Features

  • GPIO/PWM interface, 3.3/5V, PWM brightness control
  • Tiny, easy to be used in various situations
  • 2.54mm spacing pin

3 How To

3.1 Connection

  • Connect to Tiny4412 SDK (1506)
Connect the module's pin S to GPIO PIN1, V to 5V and G grounded

3.2 Code Sample in C Under Linux

#include <stdio.h>
#include <unistd.h>
#include "libfahw.h"
 
#define LED_BLINK_TIMES     10
 
int main(int argc, char ** argv)
{
    int ledPin = TINY4412_GPIO_PIN1;
    int i = 0;
    int ret = -1;
 
    if ((ret = exportGPIOPin(ledPin)) == -1) {
        printf("exportGPIOPin(%d) failed\n", ledPin);
    }
    if ((ret = setGPIODirection(ledPin, GPIO_OUT)) == -1) {
        printf("setGPIODirection(%d) failed\n", ledPin);
    }
 
    for (i = 0; i < LED_BLINK_TIMES; i++) {
        if (i % 2) {
            ret = setGPIOValue(ledPin, GPIO_HIGH);
        } else {
            ret = setGPIOValue(ledPin, GPIO_LOW);
        }
        if (ret == -1) {
            printf("setGPIOValue(%d) failed\n", ledPin);
        }
        printf("LED blinking times %d\n", i);
        sleep(1);
    }
    unexportGPIOPin(ledPin);
    return 0;
}

3.3 Compile and Run

git clone http://github.com/friendlyarm/fa-hardware.git
cd fa-hardware
cd demo
cd matrix-led
make

Copy your compiled bin to your board and you are ready to go.

4 Resources