Difference between revisions of "Matrix - 0.96' 128x64 OLED"

From FriendlyELEC WiKi
Jump to: navigation, search
(使用方法)
(Linux下的C示例)
Line 22: Line 22:
 
::CS:  SPI CS
 
::CS:  SPI CS
  
===Linux下的C示例===
+
===Code Sample in C with Linux===
 
<syntaxhighlight lang="c">
 
<syntaxhighlight lang="c">
 
#include <stdio.h>
 
#include <stdio.h>

Revision as of 08:00, 3 August 2015

查看中文

1 Introduction

0.96inch 128x64 OLED

This is a tiny single color OLED. It is 0.96" and its resolution is 128 x 64. It can display text and graphics.It is high contrast and low power consumption. This module is powered by 5V which is converted to 3.3V to OLED. It communicates via SPI or I2C. Its signal level is 3.3V. By default it communicates via SPI. If you want to set its communication interface to I2C you can change module's resistors.

2 Features

  • Tiny
  • High contrast, low power consumption
  • SPI/I2C
  • 2.54mm spacing pin header

3 How To Use It

3.1 Connection

  • Connect to Tiny4412 SDK (1506)
GND: Gound
VCC: 5V
CLK: SPI CLK
MOSI: SPI MOSI
RES: GPIO PIN1
DC: GPIO PIN2
CS: SPI CS

3.2 Code Sample in C with Linux

#include <stdio.h>
#include "libfahw.h"
 
int display(int x, int y, char* str)
{
    int devFD;
    if ((devFD = OLEDInit(TINY4412_GPIO_PIN1, TINY4412_GPIO_PIN2)) == -1) {
        printf("Fail to init OLED\n");
        return -1;
    }
    // Char bitmap: 8x16
    OLEDDisp8x16Str(devFD, x, y, str);
    OLEDDeInit(devFD);
    return 0;
}
 
int main(int argc, char *argv[]) {
    display(0, 0, "1234567890");
    display(0, 16, "ABCDEFGHIJK");
    return 0;
}

3.3 编译并运行示例

git clone http://github.com/friendlyarm/fa-hardware.git
cd fa-hardware
cd demo
cd matrix-0.96inch_128x64_oled
make

将编译生成的OLED通过ftp上传到开发板上运行即可测试。

4 相关资料