Difference between revisions of "LCD-HD702V"

From FriendlyELEC WiKi
Jump to: navigation, search
(LCD HD702V LVDS interface Pin Spec)
Line 43: Line 43:
 
|19    || /NC || ||
 
|19    || /NC || ||
 
|-
 
|-
|20    || TP_RST_P || Control IO IN || Touch reset, active hight,can be float if not used
+
|20    || TP_RST_P || Control IO IN || Touch reset, active hight,pulled to GND or float if not used
 
|-
 
|-
 
|21    || I2C_SCL || Data clock IN || I2C clock, for touch and backlight control
 
|21    || I2C_SCL || Data clock IN || I2C clock, for touch and backlight control

Revision as of 03:30, 28 January 2019

LCD HD702V LVDS interface Pin Spec

Connector type : 24Pin 0.5mm pitch FPC

Pin# Name Type Description
1 VDD_5V Power IN 5V Power input, 4.7 to 5.5V
2 VDD_5V Power IN 5V Power input, 4.7 to 5.5V
3 VDD_5V Power IN 5V Power input, 4.7 to 5.5V
4 LVDS_D0- Data IN
5 LVDS_D0+ Data IN
6 GND Power and Signal ground
7 LVDS_D1- Data IN
8 LVDS_D1+ Data IN
9 GND Power and Signal ground
10 LVDS_D2- Data IN
11 LVDS_D2+ Data IN
12 GND Power and Signal ground
13 LVDS_CLK- Data IN
14 LVDS_CLK+ Data IN
15 GND Power and Signal ground
16 LVDS_D3- Data IN
17 LVDS_D3+ Data IN
18 GND Power and Signal ground
19 /NC
20 TP_RST_P Control IO IN Touch reset, active hight,pulled to GND or float if not used
21 I2C_SCL Data clock IN I2C clock, for touch and backlight control
22 I2C2_SDA Data IN/OUT I2C data, for touch and backlight control
23 TP_INT Control IO OUT Touch interrupt, active low
24 GND Power and Signal ground

Schematic:http://wiki.friendlyarm.com/wiki/images/c/c0/LCD-HD702V-1812.pdf