How to use 4G Module on NanoPC-T4

From FriendlyELEC WiKi
Revision as of 05:28, 15 May 2019 by Tzs (Talk | contribs) (updated by API)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

查看中文

1 Using 4G Module EC20 on Android

1.1 Hardware Setup

Connect an EC20 module to a USB to miniPCIe board and connect the board to an ARM board's USB Host. Here is a hardware setup:

Power on the board and you will be able to surf the internet with the 4G module like using an Android phone.

1.2 Activate EC20's GPS Functions

By default GPS functions are disabled in Android. If GPS functions are enabled in Android but no GPS module is detected Android will continuously output log messages. After an EC20 module is connected you can enable GPS functions.
To enable the GPS functions open the "vendor/quectel/ec20/BoardConfigPartial.mk" file and change the following line:

BOARD_HAS_GPS := false

to

BOARD_HAS_GPS := true

and recompile Android。

2 Using 4G Module EC20 on FriendlyDesktop

2.1 Step1:Edit connections

In the upper right corner of the FriendlyDesktop desktop, click on the network icon and select "Edit connections" from the pop-up menu.:
Friendlydesktop-4g-step1.jpg

2.2 Step2:Add mobile network setting

Click the "+" plus button in the lower left corner:
Friendlydesktop-4g-step2.jpg
Select "Mobile Broadband" from the menu that appears:
Friendlydesktop-4g-step2b.jpg

2.3 Step3:Set up 4G connection

Select "Next" directly in "Set up a Mobile Broadband Connection" dialog:
Friendlydesktop-4g-step2c.jpg
In the area selection that appears, choose your region, I choose "China" here, there will be China's service providers, will list China Mobile and China Unicom, I use China Mobile's card, so choose "China" Mobile":
Friendlydesktop-4g-step2d.jpg
In the "Choose your billing plan" dialog, select Internet, then click Next:
Friendlydesktop-4g-step2d2.jpg
In the confirmation dialog box, click "Apply", in the following dialog box, click "Save" to save the settings:
Friendlydesktop-4g-step2e.jpg

2.4 Step4:Dial-up connection 4G network

In the upper right corner of the FriendlyDesktop desktop, click the network icon, and select “Chine Mobile Internet 1” in the pop-up menu to dial the 4G network. If the password input box is displayed, input 0000:
Friendlydesktop-4g-step4.jpg
The following picture browsing a web page on a 4G network:
Friendlydesktop-4g-step4b.jpg