Difference between revisions of "How to setup RTMP server on NanoPC-T4"

From FriendlyELEC WiKi
Jump to: navigation, search
Line 72: Line 72:
 
If it can get data continuously and the output file out.flv can be played it means your RTMP server works.
 
If it can get data continuously and the output file out.flv can be played it means your RTMP server works.
  
−
==推送OV13850摄像头图像到RMTP服务器==
+
==Push Pictures Captured by OV13850 Camera to RMTP Server==
 
下面给出两个命令，一个是仅有图像没有声音，另一个是直播带有音频的图像。<br />
 
下面给出两个命令，一个是仅有图像没有声音，另一个是直播带有音频的图像。<br />
 
仅有图像没有声音：
 
仅有图像没有声音：

Revision as of 06:49, 16 May 2019

查看中文

1 Introduction

This article gives basic steps on how to use a RK3399 based board under Linux to collect real-time video stream data and push the data to a RTMP server which a user can visit and watch the video stream.
All the steps presented in this article are verifies with the following OS systems:

  • FriendlyCore
  • FriendlyDesktop

2 Setup a RTMP Server

You will use a RK3399 board as a RTMP server. You need to install the nginx and nginx-rtmp-module packages by running the following commands: 

sudo apt-get update
sudo apt-get -y install nginx
sudo apt-get -y remove nginx
sudo apt-get clean
sudo rm -rf /etc/nginx/*
sudo apt-get install -y curl build-essential libpcre3 libpcre3-dev libpcre++-dev zlib1g-dev libcurl4-openssl-dev libssl-dev
sudo mkdir -p /var/www
rm -rf nginx_src
mkdir -p nginx_src
cd nginx_src
NGINXSRC=$PWD
wget http://nginx.org/download/nginx-1.13.8.tar.gz
git clone https://github.com/arut/nginx-rtmp-module.git
(cd nginx-rtmp-module/; git checkout -b ng1.13.8 791b6136f02bc9613daf178723ac09f4df5a3bbf)
tar -zxvf nginx-1.13.8.tar.gz
cd nginx-1.13.8
./configure --prefix=/var/www --sbin-path=/usr/sbin/nginx --conf-path=/etc/nginx/nginx.conf --pid-path=/var/run/nginx.pid --error-log-path=/var/log/nginx/error.log --http-log-path=/var/log/nginx/access.log --with-http_ssl_module --without-http_proxy_module --add-module=$NGINXSRC/nginx-rtmp-module
make
sudo make install

Check nginx's version and whether it is installed: 

nginx -v

3 Configure a RTMP Server

Open and edit the nginx's configuration file: 

sudo vim /etc/nginx/nginx.conf

Append the following lines in the file: 

rtmp {
    server {
        listen 1935;
        chunk_size 4096;
        application live {
            live on;
            record off;
        }
    }
}

Restart the nginx service and activate its configuration: 

sudo systemctl restart nginx

4 Test RTMP Server

Before you begin to use your RTMP server to get stream data you need to make sure it works: 

gst-launch-1.0 videotestsrc is-live=true ! videoconvert ! x264enc bitrate=1000 tune=zerolatency ! \
    video/x-h264 ! h264parse ! video/x-h264 ! queue ! flvmux streamable=true name=mux ! \
    rtmpsink sync=false location='rtmp://192.168.1.122:1935/live/test'

Under Ubuntu run the following rtmpdump command to retrieve stream data: 

rtmpdump -r "rtmp://192.168.1.122/live/test" -V -z -o out.flv

If it can get data continuously and the output file out.flv can be played it means your RTMP server works.

5 Push Pictures Captured by OV13850 Camera to RMTP Server

下面给出两个命令，一个是仅有图像没有声音，另一个是直播带有音频的图像。
仅有图像没有声音： 

gst-launch-1.0 rkisp io-mode=4 device=/dev/video0 ! \
    video/x-raw,format=NV12,width=1280,height=720,framerate=30/1 ! queue ! mpph264enc ! h264parse ! \
    flvmux streamable=true ! queue ! \
    rtmpsink sync=false location='rtmp://192.168.1.122:1935/live/test'

有图像有声音： 

gst-launch-1.0 rkisp io-mode=4 device=/dev/video0 ! \
    video/x-raw,format=NV12,width=1280,height=720,framerate=30/1 ! queue ! mpph264enc ! h264parse ! \
    flvmux name=mux streamable=true alsasrc device=hw:0 ! queue ! \
    audioresample ! audio/x-raw,rate=48000 ! \
    queue ! voaacenc bitrate=32000 ! aacparse ! queue ! mux. mux. ! \
    rtmpsink sync=false location='rtmp://192.168.1.122:1935/live/test'

6 推送罗技C922 Pro摄像头图像到RMTP服务器

6.1 查询USB摄像头节点

用以下命令查看一下USB摄像头的设备节点: 

uvcdynctrl -l

我们测试的罗技摄像头是C922 Pro，从结果中可以获知我们可以通过 /dev/video8 获取它的图像： 

  video8   C922 Pro Stream Webcam

6.2 查询USB摄像头所支持的格式

安装所需工具： 

sudo apt install v4l-utils

下面的命令将查询摄像头所支持的格式，在RK3399平台，只需关注MJPG格式相关的分辨率和帧率： 

sudo v4l2-ctl --list-formats-ext -d /dev/video8

注意，设备节点在你的板子上可能不是/dev/video8，你需要检查一下。

6.3 直播USB摄像头图像

用以下命令： 

gst-launch-1.0 v4l2src device=/dev/video8 ! "image/jpeg,width=1280,height=720,framerate=30/1" ! jpegdec ! videoconvert ! queue ! mpph264enc ! queue ! h264parse ! flvmux streamable=true ! queue ! rtmpsink sync=false location='rtmp://192.168.1.122:1935/live/test'

7 播放视频流

7.1 在手机上播放

如果手机用的是 iPhone，可以安装一个名为SLDP Player的免费软件，在软件上添加流地址 rtmp://192.168.1.122/live/test 即可查看实时图像：
Rk3399-iphone-rtmp.jpg

7.2 通过页面播放

我们将创建一个播放页面，目的是只需用浏览器打开网址 http://开发板的IP地址， 即可浏览直播画面，下面是创建这个播放页面的方法: 

mkdir -p ~/strobe_src
cd ~/strobe_src
wget http://downloads.sourceforge.net/project/smp.adobe/Strobe%20Media%20Playback%201.6%20Release%20%28source%20and%20binaries%29/StrobeMediaPlayback_1.6.328-full.zip
unzip StrobeMediaPlayback_1.6.328-full.zip
sudo cp -r for\ Flash\ Player\ 10.1 /var/www/html/strobe

编辑 /var/www/html/index.html， 填入如下内容，记得把下面的“开发板的IP地址”替换成你的实际的IP地址， IP地址可以通过 ifconfig 命令查看： 

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <title>NanoPi Live</title>
    <script type="text/javascript" src="strobe/lib/swfobject.js"></script>
    <script type="text/javascript"> 
        // Create a StrobeMediaPlayback configuration 
        var parameters = {  
        // src: "http://players.edgesuite.net/videos/big_buck_bunny/bbb_448x252.mp4",  
        src: "rtmp://192.168.1.122/live/test", 
        autoPlay: true,  
            controlBarAutoHide: false,  
            playButtonOverlay: true,  
            showVideoInfoOverlayOnStartUp: false,  
            optimizeBuffering : false,  
            initialBufferTime : 0.1,  
            expandedBufferTime : 0.1,  
            minContinuousPlayback : 0.1,  
            poster: "strobe/images/poster.png"
        };  
 
        // Embed the player SWF:            
        swfobject.embedSWF
        ( "strobe/StrobeMediaPlayback.swf"
            , "strobeMediaPlayback"
            , 640
            , 480
            , "10.1.0"
            , {}
            , parameters
            , { allowFullScreen: "true"}
            , { name: "strobeMediaPlayback" }
        );
    </script>   
    </head>
    <body>
        <div id="strobeMediaPlayback">
          <p>Alternative content</p>
        </div>
    </body>
</html>

最后，在电脑上用浏览器打开网址 http://开发板的IP地址 即可进入播放界面，如下图所示：
Rk3399-rtmp.png

8 推送至斗鱼直播平台

GStreamer推送命令中的 location 参数是用来设定采集到的视频流推向哪里，通过设定这个参数可以将视频流推向任何支持 RTMP 协议的服务器。
斗鱼平台同样采用了 RTMP 协议传输直播视频，下面以斗鱼平台为例来说明一下推流到斗鱼的方法。

首先获取斗鱼的 RTMP 推流地址, 开启了直播室之后可以获得推流码，所下所示:
Douyu-location.png
把这两个参数组合起来（中间加上/）就是完整的地址： 

rtmp://send3a.douyu.com/live/6012223rbUbZVVtN?wsSecret=221975cd093c763ab688f17ba8a7eb63&wsTime=5bf5315e&wsSeek=off&wm=0&tw=0

将完整的地址赋给location参数即可，命令示例如下： 

gst-launch-1.0 rkisp io-mode=4 device=/dev/video8 ! \
    video/x-raw,format=NV12,width=1280,height=720,framerate=30/1 ! queue ! mpph264enc ! h264parse ! \
    flvmux name=mux streamable=true alsasrc device=hw:0 ! queue ! \
    audioresample ! audio/x-raw,rate=48000 ! \
    queue ! voaacenc bitrate=32000 ! aacparse ! queue ! mux. mux. ! \
    rtmpsink sync=false location='rtmp://send3a.douyu.com/live/6012223rbUbZVVtN?wsSecret=221975cd093c763ab688f17ba8a7eb63&wsTime=5bf5315e&wsSeek=off&wm=0&tw=0'

Douyu-live.png

9 其他

9.1 FriendlyDesktop取消自动锁屏

sudo apt-get -y remove light-locker

9.2 查看音频设备

aplay -L
Retrieved from "https://wiki.friendlyelec.com/wiki/index.php?title=How_to_setup_RTMP_server_on_NanoPC-T4&oldid=19109"