Revision as of 04:31, 6 July 2018

查看中文

1 Introduction to DietPi

DietPi is a highly customized light-weighted Debian OS. It is developed and maintained by a third party. DietPi is a good choice for experienced developers and Linux fans. For those that are not familiar with it we suggest you use a ROM released at its official site. If you have any issues or questions you can go to DietPi's forum or its github site for help.
DietPi has the following features:
1. Light-weighted. ROM size is less than 500M
2. Highly optimized. CPU and RAM usage is small
3. Contains various utilities and provides user-friendly services
4. DietPi-Software: a good tool for installing packages
5. DietPi-Config: a good tool for system configuration
6. DietPi-Backup: a good tool for system backup and restoration
For more details you can refer to DietPi's official site

2 Install DietPi

2.1 Download Image Files

DietPi image files are developed and maintained by the DietPi team. Its official site is DietPi download link,DietPi is being ported to more FriendlyElec's boards. So far the following boards already work with DietPi:

If you like DietPi and wish to join its development and maintenance youu can check its github site:DietPi Github and forum DietPi forum, and help make DietPi work with more FriendlyElec's boards.

Alternatively you can download DietPi's image files from FriendlyElec's DVD and the image files are under the DVD's "/unoffcial-ROMs" directory. The image files are obtained from its official site and changed a little bit by FriendlyElec. The changes FriendlyElec made to the image files are to include the latest system files such as Bootloader/Kernel/DTB/Modules. If you cannot find a DietPi image file from FriendlyElec's DVD it means the board the DVD is associated with may not work with DietPi. If you directly download image files from DietPi's official site you need to check whether or not the image files have the latest Bootloader/Kernel/DTB/Modules. If these files are not the latest you need to update the image with the latest files.

2.2 Flash DietPi

The method to flash a DietPi image is the same as the method to flash a FriendlyElec image to a FriendlyElec board:
Extract an image file and the win32diskimager.rar utility under a Windows PC system. Insert a TF card (at least 4G) to the PC, run the win32diskimager utility as administrator, select the TF card drive and your wanted file and click on "Write" to start flashing.

2.3 Configure dietpi.txt

After a DietPi image is flashed to an SD card that SD card will have two sections:boot and rootfs. The boot section contains system files, a "dietpi" directory and a dietpi.txt file. The "dietpi" directory contains all DietPi related scripts. This directory and the files in it are generated and used for initializing system when DietPi is booted for the first time. The dietpi.txt is the configuration file DietPi uses to configure a system. We suggest you read this file carefully.

2.3.1 Networking Options

# Enable/disable Ethernet and WiFi. When both are enabled WiFi will be activated first.
AUTO_SETUP_NET_ETHERNET_ENABLED=1
AUTO_SETUP_NET_WIFI_ENABLED=0
 
# Set WiFi hotspot SSID and password
AUTO_SETUP_NET_WIFI_SSID=MySuperDooperWiFi
AUTO_SETUP_NET_WIFI_KEY=0123456789
# available | WPA-PSK / WPA-EAP / NONE | WEP=No longer supported
AUTO_SETUP_NET_WIFI_KEYMGR=WPA-PSK
 
# Set hostname
AUTO_SETUP_NET_HOSTNAME=DietPi
 
# Set Ethernet speed
# 0=automatic speed | 10 = 10mbit, 100 = 100mbit etc
AUTO_SETUP_NET_ETH_FORCE_SPEED=0

2.3.2 Misc Options

# swap size
# 0=Disabled | 1=auto (2GB-RAM = size) | 2+=manual
AUTO_SETUP_SWAPFILE_SIZE=1
# swap directory
AUTO_SETUP_SWAPFILE_LOCATION=/var/swap

2.3.3 Software Automation Options

# Install software automatically
AUTO_SETUP_AUTOMATED=0
 
# Global passwords including passwords for root, dietpi, MySQL, Transmission and etc
AUTO_SETUP_GLOBAL_PASSWORD=dietpi
 
# SSH server
#		0=none
#		-1=dropbear
#		-2=opensshserver
AUTO_SETUP_SSH_SERVER_INDEX=-1
 
# Log
#		0=none/manual
#		-1=ramlog 1h clear
#		-2=ramlog 1h save clear
#		-3=logrotate + rsyslog
AUTO_SETUP_LOGGING_INDEX=-1
 
# webserver
#	NB: This will get ignored, if you have manually selected any WEBSERVER_Stack.
#		0=Apache2
#		-1=Nginx
#		-2=Lighttpd
AUTO_SETUP_WEB_SERVER_INDEX=-2

2.3.4 DietPi-Config settings

# CPU strategy | ondemand | powersave | performance | conservative
CONFIG_CPU_GOVERNOR=ondemand
CONFIG_CPU_USAGE_THROTTLE_UP=50
 
# CPU's min and max frequencies
CONFIG_CPU_MAX_FREQ=Disabled
CONFIG_CPU_MIN_FREQ=Disabled
 
# Whether or not wait for network on system boot
CONFIG_BOOT_WAIT_FOR_NETWORK=1
 
# Enable/disable login with serial console.
CONFIG_SERIAL_CONSOLE_ENABLE=1
 
# Package source. You'd better choose a source accessible from your location.
CONFIG_APT_DEBIAN_MIRROR=http://ftp.cn.debian.org/debian/

The aforementioned options are only part of DietPi's features. For more details refer to the dietpi.txt file or visit DietPi's official site.

3 Work with DietPi

3.1 Boot DietPi for the First Time

DietPi's initialization is a complicated process. However after it is initialized it will be easy to use.
Firstly you need to connect your board to the internet since initialization needs to work with the internet
On the very first boot DietPi will extend the rootfs section. After this is done DietPi will be rebooted and initialized based on the settings specified in the dietpi.txt file. For example if CONFIG_SERIAL_CONSOLE_ENABLE=1 DietPi will call the "DietPi-Set_Hardware" script to activate the serial-getty service and login with serial console will be enabled on next system boot. If you don't want your system to be rebooted you can login with SSH and the username is "root" and password is "dietpi". Here is a screenshot showing how DietPi-V6.7 is doing initialization on NanoPi-K1-Plus. Initialization may differ for different boards:
运行DietPi-Software:


Based on the system log we can see that "apt-get update" was executed. If your board isn't connected to the internet you need to reset the CONFIG_APT_DEBIAN_MIRROR option in the dietpi.txt file.
Run DietPi-Set_software to set global passwords:


Run DietPi-Set_software to set passwords:


Prompt users to check IP with the "ip a" command:


Whether or not allow DietPi to collect and upload hardware information:


DietPi is upgraded to the latest version:


After DitePi automatically upgrades itself it will reboot. After reboot it will run Dietpi-Software again and ask you whether or not to change global and user passwords and then go to DietPi-Software's main window on which you can select packages you want to install:


We used the default settings and clicked on "Install" and "OK" to proceed:


DietPi will reboot and after reboot initialization will be completed.

3.2 DietPi实用脚本简介

Dietpi系统提供了大量的实用脚本，所有脚本的源码均位于/rootfs/Dietpi目录，这里选择一些核心的脚本进行功能性的描述，这些描述都是基于NanoPi-K1-Plus + DietPi-V6.10，具体的脚本里的各个功能并没有在其他平台上经过准确的测试和验证，用户需自行测试和使用，如果遇到了问题，请向DietPi的官方github和论坛进行意见反馈。

3.2.1 DietPi-Launcher

我们可以通过dietpi-launcher来统一地使用这些脚本工具，在命令行终端运行该工具:

$ dietpi-launcher

可以看到如下界面:

同理，下列DietPi提供的下列脚本也可以在命令行终端单独运行:

dietpi-autostart      dietpi-cleaner        dietpi-drive_manager  dietpi-letsencrypt    dietpi-process_tool   dietpi-survey         
dietpi-backup         dietpi-config         dietpi-justboom       dietpi-logclear       dietpi-services       dietpi-sync           
dietpi-bugreport      dietpi-cron           dietpi-launcher       dietpi-morsecode      dietpi-software       dietpi-update

3.2.2 DietPi-Software

在Software Optimized里有大量常见的软件，预先配置好、开箱即用。


选择您需要的软件，然后选择“Go >> Start installation for selected software”开始安装。

3.2.3 DietPi-Config

提供各种软硬件配置和功能:


本维基编写时，部分开发板硬件相关的功能并没有实现好，但是仍然有许多通用的软件功能可以使用。

• Display Options

外观显示相关的设置，例如分辨率，LED的设置。

• Audio Options

选择系统默认使用的声卡设备。

• Performance Options

设置CPU的性能，例如CPU的分配策略，最大最小频率。

• Advanced Options

设置swap文件的大小，是否使能: 网络时间同步、蓝牙、调试串口。

• Language/Regional Options

设置语言和时区。

• Security Options

设置hostname和password。

• Network Options: Adapters

设置有线和无线网络，是否使用代理。

• Network Options: Misc

设置是否apt软件源、ntp软件源等。

• AutoStart Options

设置开机登录或者运行指定软件，可单独运行DietPi-AutoStart来进入该界面。

• Tools

测试系统性能和稳定性的工具, 调用Benchmarks和stress工具。

3.2.4 DietPi-Cron

将你想要定时运行的脚本放到/etc/cron.daily/目录下，然后通过该工具设置定时运行的时间。

3.2.5 DietPi-Drive_Manager

管理各种存储器，例如SD卡，emmc，U盘。提供格式化设备、选择设备的挂载点、挂载网络设备等功能。

3.2.6 DietPi-Update

一键升级DietPi的版本。

3.2.7 DietPi-Backup

支持备份和还原文件系统，默认生成的备份文件位于/mnt/dietpi-backup。

3.2.8 DietPi-Cleaner

清理文件系统，允许选择需要清理的组件(例如apt软件包，log文件等)，运行模拟执行清理操作以防止误删除。

3.2.9 DietPi-CpuInfo

显示CPU的频率、温度等信息。

3.2.10 DietPi-BugReport

反馈Bug给DietPi的官方团队。