BakeBit Starter Kit with NanoPi NEO/NEO2/NEO Air/zh

1 介绍BakeBit

BakeBit是一套传感器连接的解决方案，包括硬件（NEO-Hub扩展板)和软件(BakeBit)。
BakeBit可以让众多传感器可以非常便捷灵活地连接到各个型号的NanoPi开发板上, 即插即用，支持数字、模拟接口，支持I2C与串口连接，所有的传感器都使用统一规格的连接线，从此远离那些乱糟糟的杜邦线与焊锡。

2 如何在开发板上使用BakeBit

目前支持的开发板有NanoPi NEO, NanoPi Air，
连接方法是简单地堆叠NEO-Hub扩展板到你的NanoPi NEO上即可：

3 安装BakeBit软件

第1步 - 通过ssh，或者串口终端进入开发板的命令行，从 github 上下载BakeBit代码:

cd  ~
git clone https://github.com/friendlyarm/BakeBit.git

第2步 - 使用如下命令在开发板上安装BakeBit:

cd BakeBit/Script
chmod +x install.sh
./install.sh

第3步 - 重启开发板:

reboot

第4步 - 验证BakeBit是否正常工作:

将LED配件连接到NEO-Hub上的D3插座，在命令行执行以下命令操作LED:

python ~/BakeBit/Software/Python/bakebit_led_blink.py

看到LED闪烁，恭喜你，BakeBit已经为你准备好了！

4 BakeBit Starter Kit

BakeBit Starter Kit是一个基础套件，包含了适用于NanoPi NEO的NEO-Hub扩展板及12个传感器。
下表列出了该套件所包含的传感器：

1	BakeBit-Button	按钮开关模块连接方式: 连接到数字接口 D3 或D5 示例源代码: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_buzzer.py WiKi网址: http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Buzzer
2	BakeBit-Buzzer	蜂鸣器模块连接方式: 连接到数字接口 D2 ~ D5 示例源代码: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_button.py WiKi网址: http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Buzzer
3	BakeBit-Green LED	绿色的LED发光二极管模块，亮度可调节连接方式: 连接到数字接口 D2 ~D5 示例源代码: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_led_blink.py WiKi网址: http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Green_LED
4	BakeBit-JoyStick	摇杆模块连接方式: 连接到模拟接口 A0 ~D2 示例源代码: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_prj_UIControl_via_Joystick.py WiKi网址: http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_JoyStick
5	BakeBit-LED Bar	多彩LED模块，由五个多彩LED发光二极管组成连接方式: 连接到数字接口D3或D5 示例源代码: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_ledbar.py WiKi网址: http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_LED_Bar
6	BakeBit-Light Sensor	光敏电阻模块连接方式: 连接到模拟接口A0~A2 示例源代码: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_light_sensor.py WiKi网址: http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Light_Sensor
7	BakeBit-OLED 128X64	单色OLED屏幕 (0.96寸、128x64分辨率) 连接方式: 连接到I2C接口示例源代码: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_128_64_oled_test.py WiKi网址: http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_OLED_128x64
8	BakeBit-Red LED	红色LED模块，亮度可调节连接方式: 连接到数字接口 D2 ~D5 示例源代码: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_led_blink.py WiKi网址: http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Red_LED
9	BakeBit - Rotary Angle Sensor	电位器连接方式: 连接到模拟接口 A0~A2 示例源代码: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_rotary_angle_sensor.py WiKi网址: http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Rotary_Angle_Sensor
10	BakeBit - Servo	舵机模块连接方式: 连接到数字接口 D3或D5 示例源代码: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_servo.py WiKi网址: http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Servo
11	BakeBit - Sound Sensor	声音检测模块，用于检测声音信号连接方式: 连接到模拟接口A0~A2 示例源代码: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_sound_sensor.py WiKi网址: http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Sound_Sensor
12	BakeBit - Ultrasonic	超声波模块，用来探测障碍物，并计算到障碍物距离连接方式: 连接到数字接口D2~D5 示例源代码: https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_ultrasonic.py WiKi网址: http://wiki.friendlyarm.com/wiki/index.php/BakeBit_-_Ultrasonic_Ranger