BakeBit - Button/zh

From FriendlyELEC WiKi
Revision as of 10:43, 28 November 2016 by Tzs (Talk | contribs) (示例源代码)

Jump to: navigation, search

English

1 介绍

按键
  • BakeBit - Button是一个瞬时(非自锁)按钮开关模块,用于检测按键事件,按钮被释放后自动恢复到常态。
  • 在按钮未被按下时模块输出高电平,按钮被按下后输出低电平。

2 特性

  • 使用标准的2.0mm 4 Pin BakeBit接口
  • 数字信号输出
  • PCB尺寸(mm):20x24

BakeBit - Button.PCB

  • 引脚说明:
名称 描述
GND
5V 电源5V
NC
SIG 信号

3 示例程序:Button And Buzzer

本示例需要配合蜂鸣器使用。

3.1 硬件连接

简单的将 蜂鸣器 模块插入 D3接口,将 按键 插入 D4 接口,如下面这样:

Button And Buzzer-1.jpg Button And Buzzer-2.jpg

3.2 示例源代码

import bakebit
import time
# Connect the BakeBit Ultrasonic Ranger to digital port D4
# SIG,NC,VCC,GND
ultrasonic_ranger = 4
 
# Connect the BakeBit LED to digital port D3
led = 3                                                                      
 
bakebit.pinMode(led,"OUTPUT")
light = 0
 
while True:
    try:
        # Read distance value from Ultrasonic
	distance = bakebit.ultrasonicRead(ultrasonic_ranger)
        print(distance)
	if distance > 0:
		if distance<10: 
			if light == 0:
				print("\ton")
				bakebit.digitalWrite(led,1)
				light = 1
		else:
			if light == 1:
				print("\toff")
				bakebit.digitalWrite(led,0)
				light = 0
	time.sleep(.2)
 
    except KeyboardInterrupt:
	bakebit.digitalWrite(led,0)
        break
 
    except TypeError:
        print ("Error")
    except IOError:
        print ("Error")

Github

3.3 运行示例

假设你已经参考bakebit教程安装了BakeBit源代码,
要运行示例程序,可以在开发板上进入 BakeBit/Software/Python目录,运行bakebit_prj_Button_And_Buzzer.py:

cd ~/BakeBit/Software/Python
sudo python bakebit_prj_Button_And_Buzzer.py

3.4 运行结果

当按下按键时,蜂鸣器会响起,松开按键时,蜂鸣器停止。

4 相关资料