BakeBit - Buzzer

查看中文

1 Introduction

Buzzer

• The BakeBit-Buzzer is a passive buzzer. To drive this buzzer an oscillating source generating 2.7K square waves is needed.
• PWM input signals with different frequencies generate different sounds.
• It can be used in electronic devices that need sound generators.

2 特性

• 使用标准的2.0mm 4 Pin BakeBit接口
• PWM信号输入
• PCB尺寸（mm）：20x24

• 引脚说明:

名称	描述
GND	电源5V
5V	地
NC	空
SIG	输入，接PWM

3 示例程序：Button And Buzzer

本示例需要配合BakeBit - Button使用。

3.1 硬件连接

简单的将 蜂鸣器 模块插入 D3接口，将 按键 插入 D4 接口，如下面这样：

3.2 示例源代码

import bakebit
import time
# Connect the BakeBit Ultrasonic Ranger to digital port D4
# SIG,NC,VCC,GND
ultrasonic_ranger = 4
 
# Connect the BakeBit LED to digital port D3
led = 3                                                                      
 
bakebit.pinMode(led,"OUTPUT")
light = 0
 
while True:
    try:
        # Read distance value from Ultrasonic
	distance = bakebit.ultrasonicRead(ultrasonic_ranger)
        print(distance)
	if distance > 0:
		if distance<10: 
			if light == 0:
				print("\ton")
				bakebit.digitalWrite(led,1)
				light = 1
		else:
			if light == 1:
				print("\toff")
				bakebit.digitalWrite(led,0)
				light = 0
	time.sleep(.2)
 
    except KeyboardInterrupt:
	bakebit.digitalWrite(led,0)
        break
 
    except TypeError:
        print ("Error")
    except IOError:
        print ("Error")

Github

3.3 运行示例

假设你已经参考bakebit教程安装了BakeBit源代码，
要运行示例程序，可以在开发板上进入 BakeBit/Software/Python目录,运行bakebit_prj_Button_And_Buzzer.py:

cd ~/BakeBit/Software/Python
sudo python bakebit_prj_Button_And_Buzzer.py

3.4 运行结果

当按下按键时，蜂鸣器会响起，松开按键时，蜂鸣器停止。

4 相关资料

• [Schematic](BakeBit - Buzzer.pdf)
• [BakeBit Github项目](https://github.com/friendlyarm/BakeBit)
• [BakeBit Starter Kit手册](http://wiki.friendlyarm.com/bakebit/bakebit_starter_kit_manual_cn.pdf)