Matrix - 0.96' 128x64 OLED

查看中文

1 Introduction

0.96inch 128x64 OLED

This is a tiny single color OLED. Its dimension is 0.96". Its resolution is 128 x 64. It can display text and graphics.It is high contrast and low power consumption. This module is powered by 5V which is converted to 3.3V to OLED. It communicates via SPI or I2C. Its signal level is 3.3V. By default it communicates via SPI. If you want to set its communication interface to I2C you can change module's resistors.

2 Features

• Tiny
• High contrast, low power consumption
• SPI/I2C
• 2.54mm spacing pin header

3 How To Use It

3.1 Connection

• Connect to Tiny4412 SDK (1506)

GND: Gound

VCC: 5V

CLK： SPI CLK

MOSI: SPI MOSI

RES: GPIO PIN1

DC: GPIO PIN2

CS: SPI CS

3.2 Code Sample in C under Linux

#include <stdio.h>
#include "libfahw.h"
 
int display(int x, int y, char* str)
{
    int devFD;
    if ((devFD = OLEDInit(TINY4412_GPIO_PIN1, TINY4412_GPIO_PIN2)) == -1) {
        printf("Fail to init OLED\n");
        return -1;
    }
    // Char bitmap: 8x16
    OLEDDisp8x16Str(devFD, x, y, str);
    OLEDDeInit(devFD);
    return 0;
}
 
int main(int argc, char *argv[]) {
    display(0, 0, "1234567890");
    display(0, 16, "ABCDEFGHIJK");
    return 0;
}

3.3 Compile and Run

git clone http://github.com/friendlyarm/fa-hardware.git
cd fa-hardware
cd demo
cd matrix-0.96inch_128x64_oled
make

Copy your compiled bin to your board and you are ready to go.