SOM-RK3399 Dev Kit/zh

From FriendlyELEC WiKi
Revision as of 06:10, 19 October 2023 by Tzs (Talk | contribs) (updated by API)

Jump to: navigation, search

English

1 简介

Overview
Front
Back
  • SOM-RK3399是友善电子团队设计的一款266-pin金手指形式高性能ARM计算机模块，它采用了瑞心微64位六核SoC RK3399作为主处理器，标配2GB DDR3内存和16GB闪存，板载2x2 MIMO双天线WiFi模组，尺寸只有69.6x50mm，模块上带有独立的TypeC供电接口，以及USB-C显示接口，无需底板也可以单独使用。
  • SOM-RK3399计算模块具有丰富的外设和扩展接口，通过底板可连接使用4通道NVMe高速固态硬盘，读写速度高达1GB/s; 它还可以扩展使用双MIPI宽动态摄像头，另外它还带有eDP显示接口，MIPI显示接口, 1路USB3.0, 2路USB2.0, 以及I2C, I2S, SPI, PWM, GPIO和串口等各种资源。
  • SOM-RK3399可流畅运行Android 8.1, Ubuntu 18.04, Armbian, Buildroot等主流嵌入式操作系统, 软件资源和生态非常丰富，尤其是Android 8.1具有NN SDK神经网络加速软件包, Qt-5.10集成了VPU硬件编解码, GPU图形加速，可使用QML快速开发流畅的动态式界面，因此SOM-RK3399核心板非常适合中小型企业和初创公司做高端人脸识别，机器视觉，VR虚拟现实，自动驾驶，深度计算分析等方面的人工智能产品快速原型及产品开发。

2 硬件资源特性

  • 核心板: SOM-RK3399, 2GB DDR3，16GB eMMC（可选配32/64GB）
  • connectivity :
    • IEEE 802.11b/g/n/AC 2x2 MIMO Wi-Fi
    • Bluetooth 4.1
    • One 10/100/1000M Ethernet Port
    • One MiniPCIe Socket and microSIM slot for 4G LTE module
  • USB
    • One USB Type-C Port
    • 4xUSB3.0 Type-A port
    • 3xUSB2.0 PH2.0 connector
  • Video out
    • One HDMI Type-A， support HDMI 2.0a, supports 4K@60Hz，HDCP 1.4/2.2
    • DisplayPort 1.2 Alt Mode on USB Type-C
    • one eDP 1.3（4-Lane，10.8Gbps）
    • one or two 4-Lane MIPI-DSI
  • Video In/Camera interface
    • One HDMI IN， support 1080p@30fps, 1280x720@60fps video and audio recording
    • one or two 4-Lane MIPI-CSI, up to 13MPix/s，supports simultaneous input of dual camera data
  • Audio
    • One 3.5mm stereo headphone Jack
    • One 3.5mm microphone Jack
    • One PH2.0 connector for microphone
  • One mciroSD card slot
  • One PCIe x4 M.2 Key-M Socket
  • Button: PowerKey, Reset, Recovery, 3xUserKey
  • LED: One Power LED, One user dual color led
  • RTC：CR2032 3V battery holder
  • others: 3xADCs，1xIR-IN，2xI2Cs，2xUARTs，1x8ch-I2S，3xGPIOS，1xSPDIF-TX，1x12V cooling fan interface
  • Power Supply： DC 12V/2A
  • 4-layer PCB

3 接口描述

SOM-RK3399 Dev Kit 1904-layout.jpg
  • HDMI IN
    • 要使用HDMI IN功能，需要短接J2。HDMI IN和MIPI-CSI1接口不能同时使用。
  • MIPI-CSI
0.5mm FPC Connector
MIPI-CSI2 can be configured to MIPI-DSI. 要使用MIPI-CSI1接口，请拔出HDMI IN的HDMI线。
Pin# MIPI-CSI1 MIPI-CSI2 Description
1 VCC5V0_SYS VCC5V0_SYS 5V Power ouput
2 VCC5V0_SYS VCC5V0_SYS 5V Power ouput
3 GND GND Return current path
4 VCC_CSI_AF2.8V VCC_CSI_AF2.8V 2.8V Power for VCM
5 VCC_CSI_1.2V VCC_CSI_1.2V 1.2V Power for image sensor core circuit
6 VCC1V8_CAM VCC1V8_CAM 1.8V power for I/O circuit
7 VCC_CSI_2.8V VCC_CSI_2.8V 2.8V power for image sensor analog circuit
8 VCC_CSI_1.0V VCC_CSI_1.0V 1.0V Power for image sensor core circuit
9 I2C1_SCL I2C2_SCL 1.8V I2C clock signal
10 I2C1_SDA I2C2_SDA 1.8V I2C data signal
11 MIPI_CSI0_RST MIPI_CSI1_RST reset camera module
12 MIPI_CSI0_PWN MIPI_CSI1_PWN Power down camera module
13 GND GND Return current path
14 GPIO2_B3_CIF_CLKOUTA GPIO2_B3_CIF_CLKOUTA MCLK to camera module
15 GND GND Return current path
16 MIPI_RX0_D3P MIPI_TX1/RX1_D3P MIPI CSI positive differential data line transceiver output
17 MIPI_RX0_D3N MIPI_TX1/RX1_D3N MIPI CSI negative differential data line transceiver output
18 GND GND Return current path
19 MIPI_RX0_D2P MIPI_TX1/RX1_D2P MIPI CSI positive differential data line transceiver output
20 MIPI_RX0_D2N MIPI_TX1/RX1_D2N MIPI CSI negative differential data line transceiver output
21 GND GND Return current path
22 MIPI_RX0_D1P MIPI_TX1/RX1_D1P MIPI CSI positive differential data line transceiver output
23 MIPI_RX0_D1N MIPI_TX1/RX1_D1N MIPI CSI negative differential data line transceiver output
24 GND GND Return current path
25 MIPI_RX0_CLKP MIPI_TX1/RX1_CLKP MIPI CSI positive differential clock line transceiver output
26 MIPI_RX0_CLKN MIPI_TX1/RX1_CLKN MIPI CSI negative differential clock line transceiver output
27 GND GND Return current path
28 MIPI_RX0_D0P MIPI_TX1/RX1_D0P MIPI CSI positive differential data line transceiver output
29 MIPI_RX0_D0N MIPI_TX1/RX1_D0N MIPI CSI negative differential data line transceiver output
30 GND GND Return current path
  • MIPI-DSI
0.5mm FPC connector
Pin# Assignment Description
1, 2, 3 VCC5V0_SYS 5V power output
4 GND Return current path
5 I2C4_SDA 3V I2C data signal, Connect to touch panel
6 I2C4_SCL 3V I2C clock signal, Connect to touch panel
7 GND Return current path
8 GPIO1_C4_TP_INT 3V interrupt input, Connect to the interrupt output of touch panel
9 GND Return current path
10 PWM0_BL 3V PWM output, for LCD backlight dimming
11 GND Return current path
12 GPIO4_D5_LCD_BL_EN 3V output for turning on/off the LCD backlight
13 GPIO4_D6_LCD_RST_H 3V output for reseting the LCD module
14 GPIO1_B5_TP_RST 3V output for reseting touch panel, Connect to the reset input of touch panel
15 GND Return current path
16 MIPI_TX0_D3N MIPI DSI negative differential data line transceiver output
17 MIPI_TX0_D3P MIPI DSI positive differential data line transceiver output
18 GND Return current path
19 MIPI_TX0_D2N MIPI DSI negative differential data line transceiver output
20 MIPI_TX0_D2P MIPI DSI positive differential data line transceiver output
21 GND Return current path
22 MIPI_TX0_D1N MIPI DSI negative differential data line transceiver output
23 MIPI_TX0_D1P MIPI DSI positive differential data line transceiver output
24 GND Return current path
25 MIPI_TX0_D0N MIPI DSI negative differential data line transceiver output
26 MIPI_TX0_D0P MIPI DSI positive differential data line transceiver output
27 GND Return current path
28 MIPI_TX0_CLKN MIPI DSI negative differential clock line transceiver output
29 MIPI_TX0_CLKP MIPI DSI positive differential clock line transceiver output
30 GND Return current path
  • eDP
Connector P/N: I-PEX-20455-030E
Pin# Assignment Description
1 GND Signal ground
2 EDP_TX3N eDP data lane 3 negative output
3 EDP_TX3P eDP data lane 3 positive output
4 GND Signal ground
5 EDP_TX2N eDP data lane 2 negative output
6 EDP_TX2P eDP data lane 2 positive output
7 GND Signal ground
8 EDP_TX1N eDP data lane 1 negative output
9 EDP_TX1P eDP data lane 1 positive output
10 GND Signal ground
11 EDP_TX0N eDP data lane 0 negative output
12 EDP_TX0P eDP data lane 0 positive output
13 GND Signal ground
14 EDPAUXP eDP CH-AUX positive differential output
15 EDPAUXN eDP CH-AUX negative differential output
16 GND Signal ground
17 VCC3V3_SYS 3.3V Power output for logic
18 VCC3V3_SYS 3.3V Power output for logic
19 I2C4_SDA 3V I2C data signal, Connect to touch panel
20 I2C4_SCL 3V I2C clock signal, Connect to touch panel
21 GPIO1_C4_TP_INT 3V interrupt input, Connect to the interrupt output of touch panel
22 GPIO1_B5_TP_RST 3V output for reseting touch panel, Connect to the reset input of touch panel
23 PWM0_BL 3V PWM output, for LCD backlight dimming. pull up to VCC3V3_SYS on LCD side.
24 GPIO4_D5_LCD_BL_EN 3V output for turning on/off the LCD backlight
25 GND Backlight ground
26 GND Backlight ground
27 GND Backlight ground
28 VCC12V0_SYS 12V Power output for Backlight Power
29 VCC12V0_SYS 12V Power output for Backlight Power
30 VCC12V0_SYS 12V Power output for Backlight Power
  • PCIex4 M.2
PCIe Gen 2.1 x4
M.2 Key M Connector for Socket 2/Socket 3 PCIe-based Module, such as PCIe SSD
Connector P/N: MDT-420-M-01002
Pin# Assignment Description Pin# Assignment Description
1 GND Return current path 2 VCC3V3_SYS 3.3V Power output
3 GND Return current path 4 VCC3V3_SYS 3.3V Power output
5 PCIE_RX3_N PCIe differential data input signals 6 N/C no connection
7 PCIE_RX3_P PCIe differential data input signals 8 N/C no connection
9 GND Return current path 10 N/C no connection
11 PCIE_TX3N PCIe differential data output signals 12 VCC3V3_SYS 3.3V Power output
13 PCIE_TX3P PCIe differential data output signals 14 VCC3V3_SYS 3.3V Power output
15 GND Return current path 16 VCC3V3_SYS 3.3V Power output
17 PCIE_RX2_N PCIe differential data input signals 18 VCC3V3_SYS 3.3V Power output
19 PCIE_RX2_P PCIe differential data input signals 20 N/C no connection
21 GND Return current path 22 N/C no connection
23 PCIE_TX2N PCIe differential data output signals 24 N/C no connection
25 PCIE_TX2P PCIe differential data output signals 26 N/C no connection
27 GND Return current path 28 N/C no connection
29 PCIE_RX1_N PCIe differential data input signals 30 N/C no connection
31 PCIE_RX1_P PCIe differential data input signals 32 N/C no connection
33 GND Return current path 34 N/C no connection
35 PCIE_TX1N PCIe differential data output signals 36 N/C no connection
37 PCIE_TX1P PCIe differential data output signals 38 DEVSLP/NC internal pull up to VCC3V3_SYS with 10K
39 GND Return current path 40 I2C2_SCL 1.8V I2C clock signal
41 PCIE_RX0_N PCIe differential data input signals 42 I2C2_SDA 1.8V I2C data signal
43 PCIE_RX0_P PCIe differential data input signals 44 GPIO2_A2_PCIE_ALERT# 1.8V GPIO signal
45 GND Return current path 46 N/C no connection
47 PCIE_TX0N PCIe differential data output signals 48 N/C no connection
49 PCIE_TX0P PCIe differential data output signals 50 GPIO2_A4_PCIE_RESET# 1.8V GPIO signal
51 GND Return current path 52 CLKREQ#/NC internal pull down to GND with 0R
53 PCIE_REF_CLKN differential reference clock out for PCIe peripheral 54 GPIO2_A3_PCIE_WAKE# 1.8V GPIO signal
55 PCIE_REF_CLKP differential reference clock out for PCIe peripheral 56 N/C no connection
57 GND Return current path 58 N/C no connection
59 Connector Key Connector Key 60 Connector Key Connector Key
60 Connector Key Connector Key 61 Connector Key Connector Key
62 Connector Key Connector Key 63 Connector Key Connector Key
64 Connector Key Connector Key 65 Connector Key Connector Key
66 Connector Key Connector Key 67 N/C no connection
68 RTC_CLKO_SOC 1.8V 32.768KHz clock output 69 N/C no connection
70 VCC3V3_SYS 3.3V Power output 71 GND Return current path
72 VCC3V3_SYS 3.3V Power output 73 GND Return current path
74 VCC3V3_SYS 3.3V Power output 75 GND Return current path
  • PH2.0 connectors(USB2.0 I2C, UART, ADC, IR)
I2C2，I2C3，UART4，UART_U的电平均为3.3V；ADC输入范围为0~1.8V；请直接连接红外接收器对应的三个引脚到IR IN接口(IR1)
UART_U为USB转的串口
USB2.0 I2C2,I2C3 UART4 UART_U ADC IR IN
Pin# Assignment Pin# Assignment Pin# Assignment Pin# Assignment Pin# Assignment Pin# Assignment
1 5V 1 GND 1 GND 1 GND 1 GND 1 DATA
2 DM 2 SDA 2 RX 2 CTS 2 1.8V out 2 GND
3 DP 3 SCL 3 TX 3 RTS 3 ADC0 3 3.3V
4 GND 4 5V 4 5V 4 RX 4 ADC2
5 TX 5 ADC3
6 5V
  • Microphone
3.5mm耳机孔(MIC1)和PH2.0座子(MIC2)是同一路麦克风输入，当插入3.5mm耳机孔后，PH2.0座子的信号被断开。请直接连接麦克风，理论上支持所有类型的麦克风。
  • Power Supply
底板提供两个电源输入接口，5.5*2.1 DC插座和4Pin PC电源插座，型号是Molex 5566-04A(或兼容)，都是处于开关之前，受开关控制。
底板除了有一个电源开关，还提供了一个XH-2A开关引出座子。
J1是开机模式选择跳针，开路上电自动开机，短接则需要按一下电源按键才能开机。
必须使用12V电源供电。因为电源输入放置了一个12V的TVS(型号是SMAJ12A)，所以输入电压不能超过13.3V。理论上支持5V-12V输入，但是考虑到负载，LCD供电等原因，推荐使用12V，以免负载变大时，由于较低电压的DC电源输出电流不足或电源线损耗太大导致不稳定。
  • Fan & heatsink
请搭配散热片和风扇使用板子。如果风扇不转动，可能是因为CPU温度还不足以触发温控程序输出PWM来驱动风扇。
连接器型号: JST GH系列连接器，3Pin，BM03B-GHS-TBT
Pin# Assignment Description
1 GND 0V
2 12V 12V output ,controlled by GPIO4_C6/PWM1
3 /NC
  • I2S/GPIOs
Pin# Assignment Description Pin# Assignment Description
1 VCC3V3_SYS 3.3V Power Output, 500mA MAX 2 VCC5V0_SYS 5V Power Output, 2A MAX
3 VCC_1V8 1.8V Power Output,100mA MAX 4 VCC5V0_SYS 5V Power Output, 2A MAX
5 GND System Ground(0V) 6 GND System Ground(0V)
7 GPIO1_B1 3V GPIO. Linux GPIO 41 8 GND System Ground(0V)
9 GPIO1_B2 3V GPIO. Linux GPIO 42 10 GPIO4_C5/SPDIF_TX 3V GPIO. Linux GPIO 149, or SPDIF Output
11 I2C2_SDA I2C2 data, 1.8V level, open drian with 2.2K pulled internal 12 I2C2_SCL I2C2 clock, 1.8V level, open drian with 2.2K pulled internal
13 I2S0_LRCK_RX I2S0 word select for input data, 1.8V level 14 GND System Ground(0V)
15 I2S0_LRCK_TX I2S0 word select for output data, 1.8V level 16 I2S_CLK I2S Mclk for I2S0 and I2S1
17 I2S0_SCLK I2S0 continuous serial clock, 1.8V level 18 GND System Ground(0V)
19 I2S0_SDI0 I2S0 serial data, 1.8V level 20 I2S0_SDO0 I2S0 serial data, 1.8V level
21 I2S0_SDI1SDO3 I2S0 serial data, 1.8V level 22 I2S0_SDI2SDO2 I2S0 serial data, 1.8V level
23 GND System Ground(0V) 24 I2S0_SDI3SDO1 I2S0 serial data, 1.8V level
  • LED & Button
Key# GPIO Linux GPIO Active Note
K1 GPIO1_A1 33 Low GPIO默认处于悬浮状态，必须启用CPU内部上拉
K2 GPIO1_A3 45 Low
K3 GPIO1_A4 36 Low
双色LED（LED2）
Color GPIO Linux GPIO Active
翠绿色 GPIO1_C7 55 Hight
橙色 GPIO1_D0 56 Hight
  • Button Jumper(CON9）
Pin# Assignment Pin# Assignment Description
1 PWR_KEY 2 GND 引出电源按键
3 RECOVERY 4 GND 引出RECOVERY按键
5 RESET_IN_H 6 VCC3V3_SYS 引出复位按键
7 KEY1 8 GND 引出K1按键

4 Link to Rockchip Resources

5 原理图, PCB CAD 文件

Retrieved from "https://wiki.friendlyelec.com/wiki/index.php?title=SOM-RK3399_Dev_Kit/zh&oldid=25103"