4x USB 3.0 HAT for M4

From FriendlyELEC WiKi
Revision as of 07:40, 25 June 2019 by Yonganch (Talk | contribs) (Created page with "==Features== Back * '''USB 3.0''' ** based on VL805 USB 3.0 host Controller, via a single PCIe 2.0 Lane ** 4x USB 3.0 Share 5Gbps Bandwid...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

1 Features

Back
  • USB 3.0
    • based on VL805 USB 3.0 host Controller, via a single PCIe 2.0 Lane
    • 4x USB 3.0 Share 5Gbps Bandwidth
    • fully backward compatible with USB 2.0 and 1.1 specifications
  • USB 2.0
    • Two 4-PIN PH2.0 USB 2.0 host connectors, independent bandwidth
  • Power
    • a 5.5*2.1mm DC-Jack for 12V Power Input
    • The output current of the 12V to 5V DC/DC regulator is up to 8A
    • One PowerKey button
  • Heat dissipation
    • One 2-PIN PH2.0 connector for fan. The 12V output is modulated by PWM1
  • GPIO
    • ALL the signals of the NanoPi M4's 40-PIN connector are populated
Overview
Front
Back

2 Block

M4 USB HAT Block.jpg

3 Resources

Retrieved from "https://wiki.friendlyelec.com/wiki/index.php?title=4x_USB_3.0_HAT_for_M4&oldid=19562"