SOM-RK3399

From FriendlyELEC WiKi
Revision as of 10:30, 23 May 2019 by Yonganch (Talk | contribs) (→‎Layout)

Jump to: navigation, search

查看中文

1 Introduction

Overview
Front
Back

2 Hardware Spec

  • SoC: Rockchip RK3399
    • CPU: big.LITTLE，Dual-Core Cortex-A72(up to 2.0GHz) + Quad-Core Cortex-A53(up to 1.5GHz)
    • GPU: Mali-T864 GPU，supports OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC
    • VPU: 4K VP9 and 4K 10bits H265/H264 60fps decoding, Dual VOP, etc
  • PMU: RK808-D PMIC, cooperated with independent DC/DC, enabling DVFS, solfware power-down, RTC wake-up, system sleep mode
  • RAM: Dual-Channel 2GB DDR3
  • Flash: 16GB eMMC 5.1 Flash
  • Ethernet: Native Gigabit Ethernet
  • Wi-Fi/BT: 802.11a/b/g/n/ac, Bluetooth 4.1, Wi-Fi and Bluetooth combo module, dual antenna interface
  • Video Input: one or two 4-Lane MIPI-CSI, dual ISP, up to 13MPix/s，supports simultaneous input of dual camera data
  • Video output
    • HDMI: HDMI 2.0a, supports 4K@60Hz，HDCP 1.4/2.2
    • DP on Type-C: DisplayPort 1.2 Alt Mode on USB Type-C
    • LCD Interface: one eDP 1.3（4-Lane，10.8Gbps）, one or two 4-Lane MIPI-DSI
  • USB
    • USB 2.0: 2 independent native USB 2.0 Host
    • USB 3.0: 1 native USB 3.0 Host
    • USB Type-C: Supports USB3.0 Type-C and DisplayPort 1.2 Alt Mode on USB Type-C
  • PCIe: PCIe x4, compatible with PCIe 2.1, Dual operation mode;
  • SDIO/MMC: 1x SDIO/MMC for SD Card
  • GPIOs, I2S, I2C, PWM, UART, SPI, ADCs
    • 2 X 1.8V I2C, 1 x 3V I2C
    • 1 x 3V UART/SPI
    • 2 x PWM
    • 1 x IR-RX
    • 1 x SPDIF_TX
    • 1 x 1.8V I2S,
    • 6 x 1.8V GPIOs, 8 x 3V GPIOs
    • ADC: 3 x 1.8V ADC inputs
  • Debug: one Debug UART, 3V level, 1500000bps
  • Keys: PowerKey, Reset, Recovery
  • LED: 1 x power LED and 1 x GPIO Controlled LED
  • Power supply: DC 5V~20V
  • PCB: 8 Layer, 50 mm x 69.6 mm, 260 Pin edge connector
  • Ambient Operating Temperature: -20℃ to 70℃

3 Software Features

4 Diagram, Layout and Dimension

4.1 Layout

  • 260 Pin Spec
    • Socket Type：0.5mm Pitch 260-Pin Standard Type DDR4 SODIMM Socket
Top Bottom
Pin# Assignment Pin Type If Not Use Description Pin# Assignment Pin Type If Not Use Description
1 VCC_IN Power IN / 5V to 20V Power Input 2 VCC_IN Power IN / 5V to 20V Power Input
3 VCC_IN Power IN / 4 VCC_IN Power IN /
5 VCC_IN Power IN / 6 VCC_IN Power IN /
7 VCC_IN Power IN / 8 VCC_IN Power IN /
9 GND Power / System Ground(0V) 10 GND Power / System Ground(0V)
11 GND Power / 12 GND Power /
13 VCC5V0_SYS Power OUT float 5V Power Output，2A max. Auto on when system power on, and off when system power off. 14 PWR_KEY In float System Power Key signal, active low, internal pulled up to 3.3V with 10K
15 VCC5V0_SYS Power OUT float 16 VDC_ONOFF In float Power On Mode Select, float for Auto Start，short to GND for PowerKey Mode
17 VCC5V0_SYS Power OUT float 18 RTC_BATT_IN Power IN float RTC backup battery（3V）input，backup current is 25uA
19 VCC5V0_SYS Power OUT float 20 RECOVERY In float System RECOVERY Key signal，acticve low
21 VCC3V3_SYS Power OUT float 3.3V Power Output，1A max. Auto on when system power on, and off when system power off. 22 RESET_IN_H In float RESET signal， acticve hight
23 VCC3V3_SYS Power OUT float 24 GND Power / System Ground(0V)
25 VCC3V3_SYS Power OUT float 26 ADC_IN0 In float 0V to 1.8V inputs of RK3399 SoC ADC
27 VCC3V3_SYS Power OUT float 28 ADC_IN2 In float
29 VCC_1V8 Power OUT float 1.8V Power Output，200mA max. Auto on when system power on, and off when system power off. 30 ADC_IN3 In float
31 VCC_1V8 Power OUT float 32 GND Power / System Ground(0V)
33 VCC3V3_S3 Power OUT float 3.3V Power Output，100mA max. Auto on when system power on, and off when system sleep or power off. 34 GPIO1_A0 In/Out float 3V GPIO. Linux GPIO 32
35 GND Power / System Ground(0V) 36 GPIO1_A1 In/Out float 3V GPIO. Linux GPIO 33
37 GPIO0_A2 In/Out float 1.8V GPIO. Linux GPIO 2 38 GPIO1_A3 In/Out float 3V GPIO. Linux GPIO 35
39 GPIO2_A2 In/Out float 1.8V GPIO. Linux GPIO 2 40 GPIO1_A4 In/Out float 3V GPIO. Linux GPIO 36
41 GPIO2_A3 In/Out float 1.8V GPIO. Linux GPIO 67 42 GPIO1_C2 In/Out float 3V GPIO . Linux GPIO 50
43 GPIO2_A4 In/Out float 1.8V GPIO. Linux GPIO 68 44 GPIO1_C6 In/Out float 3V GPIO. Linux GPIO 54
45 GPIO2_A5 In/Out float 1.8V GPIO. Linux GPIO 69 46 GPIO1_C7 In/Out float 3V GPIO . Linux GPIO 55
47 GPIO2_A6 In/Out float 1.8V GPIO. Linux GPIO 70 48 GPIO1_D0 In/Out float 3V GPIO . Linux GPIO 56
49 IR_RX In float Infrared Receiver input, 1.8V level 50 GPIO4_C5/SPDIF_TX In/Out float 3V GPIO . Linux GPIO 149. or SPDIF Output
51 GND Power / System Ground(0V) 52 UART2DBG_TX Out float Debug UART TX, 1500000bps, 3V level
53 I2C1_SCL Out float I2C1 clock, 1.8V level, open drian with 2.2K pulled internal 54 UART2DBG_RX In float Debug UART RX, 1500000bps, 3V level
55 I2C1_SDA In/Out float I2C1 data, 1.8V level, open drian with 2.2K pulled internal 56 SPI1_CSn0 Out float SPI1 chip select, 3V level
57 I2C2_SDA In/Out float I2C2 data, 1.8V level, open drian with 2.2K pulled internal 58 SPI1_TXD/UART4_TX Out float SPI1 MOSI, or UART4 TX,3V level
59 I2C2_SCL Out float I2C2 clock, 1.8V level, open drian with 2.2K pulled internal 60 SPI1_RXD/UART4_RX In float SPI1 MISO, or UART4 RX,3V level
61 I2C7_SCL_HDMI Out float I2C7 clock, 1.8V level, for HDMI EDID CLK, open drian with 2.2K pulled internal 62 SPI1_CLK Out float SPI1 Clock, 3V level
63 I2C7_SDA_HDMI In/Out float I2C7 data, 1.8V level, for HDMI EDID DATA, open drian with 2.2K pulled internal 64 GND Power / System Ground(0V)
65 GND Power / System Ground(0V) 66 GPIO4_C1/I2C3_SCL In/Out float I2C3 clock, 3V level，open drian. or GPIO，Linux GPIO 145
67 I2S0_SCLK Out float I2S0 continuous serial clock, 1.8V level 68 GPIO4_C0/I2C3_SDA In/Out float I2C3 data, 3V level，open drian. or GPIO，Linux GPIO 144
69 I2S0_LRCK_RX Out float I2S0 word select for input data, 1.8V level 70 I2C4_TPSCL Out float I2C4 clock，3V level， open drian with 2.2K pulled up，for touch panel
71 I2S0_LRCK_TX Out float I2S0 word select for output data, 1.8V level 72 I2C4_TPSDA In/Out float I2C4 data，3V level， open drian with 2.2K pulled up，for touch panel
73 I2S0_SDI0 In float I2S0 serial data, 1.8V level 74 GND Power / System Ground(0V)
75 I2S0_SDI1SDO3 In/out float I2S0 serial data, 1.8V level 76 HP_DET_H In Pull up to VCC3V3_SYS headphone insert detect, active hight
77 I2S0_SDI2SDO2 In/out float I2S0 serial data, 1.8V level 78 GPIO4_D5_LCD_BL_EN Out float LCD backlight on/off control, active hight, 3V level
79 I2S0_SDI3SDO1 In/out float I2S0 serial data, 1.8V level 80 GPIO4_D6_LCD_RST_H Out float LCD reset, active hight, 3V level.
81 I2S0_SDO0 out float I2S0 serial data, 1.8V level 82 GPIO1_B5_TP_RST Out float Touch panel reset, active low, 3V level
83 GND Power / System Ground(0V) 84 GPIO1_C4_TP_INT In float Touch panel IRQ, active low, 3V level
85 I2S_CLK out float I2S Mclk for I2S0 and I2S1 86 GND Power / System Ground(0V)
87 GND Power / System Ground(0V) 88 PWM0_BL Out float PWM0 for LCD backlight dimming
89 I2S1_SCLK Out float I2S1 continuous serial clock, 1.8V level 90 GPIO4_C6/PWM1 Out float PWM1 for cooling fan control
91 2S1_LRCK_RX Out float I2S1 word select for input data, 1.8V level 92 GND Power / System Ground(0V)
93 I2S1_LRCK_TX Out float I2S1 word select for output data, 1.8V level 94 VCC3V0_SD Power Out float 3V power out for SD card.
95 I2S1_SDI0 In float I2S0 serial data, 1.8V level 96 GND Power / System Ground(0V)
97 I2S1_SDO0 Out float I2S0 serial data, 1.8V level 98 SDMMC0_D0 In/Out float SD card Data0
99 MIPI_CSI0_RST Out float Camera Reset for MIPI CSI0, 1.8V level 100 SDMMC0_D1 In/Out float SD card Data1
101 MIPI_CSI0_PWN Out float Camera Power Down for MIPI CSI0, 1.8V level 102 SDMMC0_D2 In/Out float SD card Data2
103 MIPI_CSI1_RST Out float Camera Reset for MIPI CSI1, 1.8V level 104 SDMMC0_D3 In/Out float SD card Data3
105 MIPI_CSI1_PWN Out float Camera Power Down for MIPI CSI1, 1.8V level 106 SDMMC0_CMD Out float SD card CMD
107 VCC1V8_CAM Power Out float Power Out for Camera IO 108 SDMMC0_DET_L In float SD card detect
109 GND Power / System Ground(0V) 110 GND Power / System Ground(0V)
111 GPIO2_B3_CIF_CLKOUTA Out / MCLK for camera sensor 112 SDMMC0_CLK Out float SD card Clock
113 GND Power / System Ground(0V) 114 GND Power / System Ground(0V)
115 MIPI_RX0_D3N In float
117 MIPI_RX0_D3P In float
119 GND Power / System Ground(0V)
121 MIPI_RX0_D2N In float
123 MIPI_RX0_D2P In float
125 GND Power / System Ground(0V)
127 MIPI_RX0_CLKN In float
129 MIPI_RX0_CLKP In float
131 GND Power / System Ground(0V)
133 MIPI_RX0_D1N In float
135 MIPI_RX0_D1P In float
137 GND Power / System Ground(0V)
139 MIPI_RX0_D0N In float
141 MIPI_RX0_D0P In float
143 GND Power / System Ground(0V)

4.2 Board Dimension

4.3 Carrier Board

SOM-RK3399 Dev Kit 1904-01B.jpg

5 Link to Rockchip Resources

6 Schematic, PCB CAD File

Retrieved from "https://wiki.friendlyelec.com/wiki/index.php?title=SOM-RK3399&oldid=19283"