Template:BurnLinuxToSD-Allwinner
From FriendlyELEC WiKi
1 Linux
1.1 Boot from TF
{{#switch: {{{1}}}
| NanoPi-R1 =
- FriendlyCore / OpenWrt are all based on a same Linux distribution and their installation methods are the same.
- Extract the Linux image and win32diskimager.rar files. Insert a TF card(at least 8G) into a Windows PC and run the win32diskimager utility as administrator. On the utility's main window select your TF card's drive, the wanted image file and click on "write" to start flashing the TF card.
- Insert this card into your board's BOOT slot and power on (with a 5V/2A power source). If the PWR/STAT LED is on
and blinking this indicates your board has successfully booted.
| #default =
- FriendlyCore / Debian / Ubuntu are all based on a same Linux distribution and their installation methods are the same.
- Extract the Linux image and win32diskimager.rar files. Insert a TF card(at least 8G) into a Windows PC and run the win32diskimager utility as administrator. On the utility's main window select your TF card's drive, the wanted image file and click on "write" to start flashing the TF card.
- Insert this card into your board's BOOT slot and power on (with a 5V/2A power source). If the PWR LED is on and the STAT LED is blinking this indicates your board has successfully booted.
