Template:S5P4418BootFromSDCard
From FriendlyELEC WiKi
Boot from SD Card
Get the following files from here download link:
- Get a 8G SDHC card and backup its data if necessary.
| Image Files | |
| s5p4418-friendly-core-xenial-4.4-armhf-YYYYMMDD.img.zip | FriendlyCore with Qt 5.10.0 (base on Ubuntu core) image file |
| s5p4418-lubuntu-desktop-xenial-4.4-armhf-YYYYMMDD.img.zip | LUbuntu Desktop image file with X Window |
| s5p4418-android-kitkat-YYYYMMDD.img.zip | Android4.4 image file with support for 4G LTE |
| s5p4418-android-lollipop-YYYYMMDD.img.zip | Android5.1 image file |
| s5p4418-eflasher-YYYYMMDD-lubuntu-desktop.img.zip | SD card image, which is used to install a lubuntu desktop to eMMC |
| s5p4418-eflasher-YYYYMMDD-friendly-core.img.zip | SD card image, which is used to install a friendly-core to eMMC |
| s5p4418-eflasher-YYYYMMDD-android.img.zip | SD card image, which is used to install a android to eMMC |
| Flash Utility: | |
| win32diskimager.rar | Windows utility. Under Linux users can use "dd" |
- Uncompress these files. Insert an SD card(at least 4G) into a Windows PC and run the win32diskimager utility as administrator. On the utility's main window select your SD card's drive, the wanted image file and click on "write" to start flashing the SD card.
- Insert this card into your board's boot slot, press and hold the boot key (only applies to a board with onboard eMMC) and power on (with a 5V/2A power source). If the PWR LED is on and LED1 is blinking this indicates your board has successfully booted.
