NanoPC-T3 Plus

查看中文

2 Hardware Spec

• SoC: Samsung S5P6818 Octa-Core Cortex-A53, 400M Hz - 1.4G Hz
• PMU Power Management: Implemented by a Cortex-M0 MCU, support software power-off, sleep and wakeup functions
• System Memory: 2GB 32bit DDR3 RAM
• Storage: 1 x microSD Card Socket
• Ethernet: Gbit Ethernet(RTL8211E)
• WiFi: 802.11b/g/n
• Bluetooth: 4.0 dual mode
• Antenna: Porcelain Antenna IPX Interface
• eMMC: 16GB
• Video Input: DVP Camera/MIPI-CSI (two camera interfaces)
• Video Output: HDMI Type-A / LVDS / Parallel RGB-LCD / MIPI-DSI (four video output interfaces)
• Audio: 3.5 mm audio jack / via HDMI
• Microphone: onboard Microphone
• USB Host: 4 x USB 2.0 Host, three type A ports and one 2.54 mm pitch pin-headers
• MicroUSB: 1 x MicroUSB 2.0 Client, Type A
• LCD Interface: 0.5mm pitch 45 pin FPC seat, full color RGB 8-8-8
• HDMI: 1.4A Type A, 1080P
• DVP Camera: 0.5mm pitch 24 pin FPC seat
• GPIO: 2.54 mm pitch 30 pin-header
• I2S/USB: 2.54 mm pitch 14 pin-header
• Serial Debug Port: 2.54mm pitch 4-pin-header
• User Key: power, Reset, boot selection
• LED: 1 x power LED and 1 x system LED
• Other Resources: CPU’s internal TMU
• RTC Battery: RTC Battery Seat
• Heat Sink: 1 x Heat Sink with mounting holes
• Power: DC 5V/2A
• PCB: Six Layer
• Dimension: 100 mm x 60 mm
• Working Temperature: -40℃ to 80℃
• OS/Software: uboot, Android and Debian

3 Diagram, Layout and Dimension

3.1 Layout

File:NanoPC-T3(2GB)-IF-01.png

NanoPC-T3(2GB) Layout

• 30Pin GPIO Pin Spec

Pin#	Name	Pin#	Name
1	SYS_3.3V	2	DGND
3	UART2_TX/GPIOD20	4	UART2_RX/GPIOD16
5	I2C0_SCL	6	I2C0_SDA
7	SPI0_MOSI/GPIOC31	8	SPI0_MISO/GPIOD0
9	SPI0_CLK/GPIOC29	10	SPI0_CS/GPIOC30
11	UART3_TX/GPIOD21	12	UART3_RX/GPIOD17
13	UART4_TX/GPIOB29	14	UART4_RX/GPIOB28
15	UART5_TX/GPIOB31	16	UART5_RX/GPIOB30
17	GPIOC4	18	GPIOC7
19	GPIOC8	20	GPIOC24
21	GPIOC28	22	GPIOB26
23	GPIOD1/PWM0	24	GPIOD8/PPM
25	GPIOC13/PWM1	26	AliveGPIO3
27	GPIOC14/PWM2	28	AliveGPIO5
29	VDD_5V	30	DGND

• 14Pin I2S/USB Pin Spec

Pin#	Name	Pin#	Name
1	5V	2	5V
3	USB_DM2	4	LED1
5	USB_DP2	6	I2S_SDIN1
7	DGND	8	I2S_SDOUT1
9	PWRKEY	10	I2S_MCLK1
11	NRESETIN	12	I2S_BCLK1
13	DGND	14	I2S_LRCK1

• DVP Camera Interface Pin Spec

Pin#	Name
1, 2	SYS_3.3V
7,9,13,15,24	DGND
3	I2C0_SCL
4	I2C0_SDA
5	GPIOB14
6	GPIOB16
8	GPIOC13/PWM1
10	NC
11	VSYNC
12	HREF
14	PCLK
16-23	Data bit7-0

• LVDS

Pin#	Name
1	VDD_5V
2	VDD_5V
3	VDD_5V
4	LVDS_Y0M
5	LVDS_Y0P
6	DGND
7	LVDS_Y1M
8	LVDS_Y1P
9	DGND
10	LVDS_Y2M
11	LVDS_Y2P
12	DGND
13	LVDS_CLKM
14	LVDS_CLKP
15	DGND
16	LVDS_Y3M
17	LVDS_Y3P
18	DGND
19	GPIOC15
20	DGND
21	I2C2_SCL
22	I2C2_SDA
23	GPIOC16
24	DGND

• Debug Port（UART0）

Pin#	Name
1	DGND
2	VDD_5V
3	UART_TXD0
4	UART_RXD0

• RGB LCD Interface Pin Spec

Pin#	Name	Description
1, 2	VDD_5V	5V Output, it can be used to power LCD modules
11，20，29, 37，38，39，40, 45	DGND	Ground
3-10	Blue LSB to MSB	RGB blue
12-19	Green LSB to MSB	RGB green
21-28	Red LSB to MSB	RGB red
30	GPIOB25	available for users
31	GPIOC15	occupied by FriendlyARM one wire technology to recognize LCD models and control backlight and implement resistive touch, not applicable for users
32	XnRSTOUT Form CPU	low when system is reset
33	VDEN	signal the external LCD that data is valid on the data bus
34	VSYNC	vertical synchronization
35	HSYNC	horizontal synchronization
36	LCDCLK	LCD clock, Pixel frequency
41	I2C2_SCL	I2C2 clock signal, for capacitive touch data transmission
42	I2C2_SDA	I2C2 data signal, for capacitive touch data transmission
43	GPIOC16	interrupt pin for capacitive touch, used with I2C2
44	NC	Not connected

• MIPI-DSI Interface Pin Spec

Pin#	Name
1, 2, 3	VDD_5V
4	DGND
5	I2C2_SDA
6	I2C2_SCL
7	DGND
8	GPIOC16
9	DGND
10	GPIOC1
11	DGND
12	NC
13	nRESETOUT
14, 15	DGND
16	MIPIDSI_DN3
17	MIPIDSI_DP3
18	DGND
19	MIPIDSI_DN2
20	MIPIDSI_DP2
21	DGND
22	MIPIDSI_DN1
23	MIPIDSI_DP1
24	DGND
25	MIPIDSI_DN0
26	MIPIDSI_DP0
27	DGND
28	MIPIDSI_DNCLK
29	MIPIDSI_DPCLK
30	DGND

• MIPI-CSI Interface Pin Spec

Pin#	Name
1, 2	SYS_3.3V
3	DGND
4	I2C0_SDA
5	I2C0_SCL
6	DGND
7	SPI2_MOSI/GPIOC12
8	SPI2_MISO/GPIOC11
9	SPI2_CS/GPIOC10
10	SPI2_CLK/GPIOC9
11	DGND
12	GPIOB23
13	GPIOC2
14, 15	DGND
16	MIPICSI_DN3
17	MIPICSI_DP3
18	DGND
19	MIPICSI_DN2
20	MIPICSI_DP2
21	DGND
22	MIPICSI_DN1
23	MIPICSI_DP1
24	DGND
25	MIPICSI_DN0
26	MIPICSI_DP0
27	DGND
28	MIPICSI_DNCLK
29	MIPICSI_DPCLK
30	DGND

• Power Key

Press Power Key 10s to turn off

• RTC

3.35uA@3V

• USB 2.0 Host

with 1A over current protection

Notes

1. SYS_3.3V: 3.3V power output
2. VDD_5V: 5V power output
3. For more details refer to the document: NanoPC-T3-1709-Schematic.pdf

3.2 Board Dimension

For more details refer to the document: [ http://wiki.friendlyarm.com/wiki/images/6/64/NanoPC-T3-1709-Drawing%28dxf%29.zip NanoPC-T3-1709-Drawing(dxf).zip ]

• Power Jack

• DC 4.7~5.6V IN, 4.0*1.7mm Power Jack