FriendlyCore (based on ubuntu-core with Qt)

From FriendlyELEC WiKi
Revision as of 10:08, 17 April 2017 by Tzs (Talk | contribs) (→‎Ubuntu-Core's User Accounts)

Jump to: navigation, search

查看中文

1 Introduction

Ubuntu Core with Qt-Embedded is a light Linux system without X-windows. It uses the Qt-Embedded's GUI and is popular in industrial and enterprise applications.

Besides the regular Ubuntu core's features our Ubuntu-Core has the following additional features:

  • it supports our LCDs with both capacitive touch and resistive touch(S700, X710, S70)
  • it supports WiFi
  • it supports Ethernet
  • it supports Bluetooth and has been installed with bluez utilities
  • it supports audio playing

2 Download Image Files

Visit the product page of one of the following products and download the firmware nanopi2-ubuntucore-with-qt-embedded-sd4g.img.zip:

  • NanoPi2, NanoPi M2, NanoPi T2: Download
  • Uncompress the file and flash the image to an SD card with either dd under Linux or win32diskimager under Windows.

3 Ubuntu-Core's User Accounts

Non-root User: 

   User Name: pi
   Password: pi

Root: 

   User Name: root
   Password: fa

The system is automatically logged in as "pi". You can do "sudo npi-config" to disable auto login.

4 Update packages

sudo apt-get update

5 Configure System with npi-config

The npi-config is a commandline utility which can be used to initialize system configurations such as user password, system language, time zone, Hostname, SSH switch , Auto login and etc. Type the following command to run this utility. 

sudo npi-config

Here is how npi-config's GUI looks like:
npi-config

6 Applications under UbuntuCore

By default our UbuntuCore system brings up a Qt demo application whose GUI is as follows:
Qt-Embedded demo


6.1 WiFi

Open the following file in the command line utility from a serial terminal: 

vi /etc/wpa_supplicant/wpa_supplicant.conf

Append the following lines. Replace "ESSID" and "PASSWORD" with your actual ID and password: 

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
country=CN
network={
        ssid="ESSID"
        psk="PASSWORD"
        key_mgmt=WPA-PSK
}

If your WiFi router doesn't have a password you can set "key_mgmt" to "NONE" and delete the whole line with "psk=".

Save, exit and run the following commands to restart WiFi connections: 

ifdown wlan0
ifup wlan0

6.2 Ethernet Connection

If a board is connected to a network via Ethernet before it is powered on it will automatically obtain an IP with DHCP activated after it is powered up. You can change this behavior by changing the configurations in the following file: 

vi /etc/network/interfaces

6.3 Bluetooth

If your board has built-in bluetooth module you can run the following command to search for a nearby bluetooth device:

hcitool scan

You can check the status by using command "hciconfig"

6.4 Playing Audio

You can play an audio file by running the following command: 

aplay -t raw -c 2 -f S16_LE -r 44100 /root/test.pcm

6.5 Work with LCD

If you connect your board to an LCD with capacitive touch panel in general that LCD's calibration is not required. However if your LCD is one with resistive touch panel you will have to do calibration which is triggered by running "/usr/bin/setqt4env" on your first system booting.

If you want to re-calibrate your LCD with resistive touch panel you need to delete the calibration file by using the following command: 

rm /etc/pointercal

After you reboot your system you will enter the calibration process.

7 Develop Qt Application

7.1 Install Qt-Embedded on Host PC

Visit the product page of one of the following products and download the target-ate-4.8.6-to-hostpc.tgz file:

  • NanoPi2, NanoPi M2, NanoPi T2: Download

Enter the root directory and uncompress the file: 

cd /
tar xvzf  ~/target-ate-4.8.6-to-hostpc.tgz

After it is done verify it by using the following command: 

/usr/local/Trolltech/QtEmbedded-4.8.6-arm/bin/qmake -v

If you install it successfully you will get the following information:
QMake version 2.01a
Using Qt version 4.8.6 in /usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib

7.2 Install Cross Compiler on Host PC (arm-linux-gcc 4.9.3)

Download and uncompress the compiler: 

git clone https://github.com/friendlyarm/prebuilts.git
sudo mkdir -p /opt/FriendlyARM/toolchain
sudo tar xf prebuilts/gcc-x64/arm-cortexa9-linux-gnueabihf-4.9.3.tar.xz -C /opt/FriendlyARM/toolchain/

Add the compiler's directory to "PATH" and append the following lines in "~/.bashrc": 

export PATH=/opt/FriendlyARM/toolchain/4.9.3/bin:$PATH
export GCC_COLORS=auto

Run "~/.bashrc" to make your setting effective. Attention: there is a space after ".": 

. ~/.bashrc

This compiler is a 64-bit one therefore it cannot be run on a 32-bit Linux machine. After the compiler is installed you can verify it by running the following commands: 

arm-linux-gcc -v
Using built-in specs.
COLLECT_GCC=arm-linux-gcc
COLLECT_LTO_WRAPPER=/opt/FriendlyARM/toolchain/4.9.3/libexec/gcc/arm-cortexa9-linux-gnueabihf/4.9.3/lto-wrapper
Target: arm-cortexa9-linux-gnueabihf
Configured with: /work/toolchain/build/src/gcc-4.9.3/configure --build=x86_64-build_pc-linux-gnu
--host=x86_64-build_pc-linux-gnu --target=arm-cortexa9-linux-gnueabihf --prefix=/opt/FriendlyARM/toolchain/4.9.3
--with-sysroot=/opt/FriendlyARM/toolchain/4.9.3/arm-cortexa9-linux-gnueabihf/sys-root --enable-languages=c,c++
--with-arch=armv7-a --with-tune=cortex-a9 --with-fpu=vfpv3 --with-float=hard
...
Thread model: posix
gcc version 4.9.3 (ctng-1.21.0-229g-FA)

7.3 Your "Hello world"

Create a "helloqt" directory and a main.cpp file on your host PC: 

cd ~
mkdir helloqt
vi main.cpp

Here is a main.cpp sample: 

#include <QApplication>
#include <QPushButton>
int main(int argc, char **argv)
{
        QApplication app (argc, argv);
        QPushButton button ("Hello world !");
        button.show();
        return app.exec();
}

Exit vi and run the following commands to compile the program: 

cd ~/helloqt
/usr/local/Trolltech/QtEmbedded-4.8.6-arm/bin/qmake -project 
/usr/local/Trolltech/QtEmbedded-4.8.6-arm/bin/qmake
make

If compilation is successful you will get a helloqt bin file. Copy the bin file to your board and run it from a terminal: 

. setqt4env
helloqt -qws&

7.4 Set Your Qt Program to Autorun

You can set your Qt program to autorun. Let's take the helloqt4 as an example. We assume it is under "/root". You need to open the "/etc/rc.local" file and delete the following two lines: 

cd /usr/local/Trolltech/QtEmbedded-4.8.6-arm/demos/embedded/fluidlauncher
./fluidlauncher -qws&

You need to keep ". /usr/bin/setqt4env" and append "/root/helloqt -qws &".

7.5 Open Source Qt Program

The GUI you will see after you boot our UbuntuCore is developed by FriendlyARM. We replaced its original Qt Demo with this GUI. This GUI is open source and its source code is under "/opt". After this program starts it will list various system information including CPU's temperature, RAM and etc. It also includes some basic Qt utilities: qmake, uic and etc which make it much easier for users to compile and generate Qt executables.

8 Q & A

  • When I compile my Qt program I get a message complaining that linking to libraries such as libts and libz failed

Your arm-linux-gcc 4.9.3 may not include these library files. You need to try downloading the compiler again.

  • Where should I get UbuntuCore's source code

We used the bin file released by UbuntuCore's official site. You can get its source code from http://packages.ubuntu.com/.

9 Update Log

9.1 July-20-2016

  • Released English version
Retrieved from "https://wiki.friendlyelec.com/wiki/index.php?title=FriendlyCore_(based_on_ubuntu-core_with_Qt)&oldid=10004"