4x USB 3.0 HAT for M4
From FriendlyELEC WiKi
Contents
1 Features
- USB 3.0
- based on VL805 USB 3.0 host Controller, via a single PCIe 2.0 Lane
- 4x USB 3.0 share 5Gbps Bandwidth
- fully backward compatible with USB 2.0 and 1.1 specifications
- USB 2.0
- Two 4-PIN PH2.0 USB 2.0 host connectors, independent bandwidth
- Power
- One 5.5*2.1mm DC-Jack and One 4Pin PH2.0 connector for 12V Power Input
- The output current of the 12V to 5V DC/DC regulator is up to 8A
- One PowerKey button
- Heat dissipation
- One 2-PIN PH2.0 connector for fan. The 12V output is modulated by PWM1
- GPIO
- ALL the signals of the NanoPi M4's 40-PIN connector are populated
2 Block
3 USB3 19Pin IDC
| Signal | Pin# | Pin# | Signal |
|---|---|---|---|
| / | / | 1 | 5V |
| 5V | 19 | 2 | USB3 SSRX-_C |
| USB3 SSRX-_D | 18 | 3 | USB3 SSRX+_C |
| USB3 SSRX+_D | 17 | 4 | GND |
| GND | 16 | 5 | USB3 SSTX-_C |
| USB3 SSTX-_D | 15 | 6 | USB3 SSTX+_C |
| USB3 SSTX+_D | 14 | 7 | GND |
| GND | 13 | 8 | USB2 D-_C |
| USB2 D-_D | 12 | 9 | USB2 D+_C |
| USB2 D+_D | 11 | 10 | GND |
4 Resources
- 2D CAD file M4_USB_HAT_2D_DXF.zip
