NanoPi M4 SATA HAT

Features

Back

• SATA
  • Use Marvell 88SE9215 Four-Port 6 Gbps SATA I/O Controller
  • Four Sata Ports. It supports three communication rates: 6 Gbps, 3 Gbps, and 1.5 Gbps
  • One 4-Pin power connector. It includes a 12V and a 5V outputs and is able to carry large currents
  • Four LEDs for indicating the status of each sata port
• Power
  • Two 12V Power Input options. It includes a 5.5*2.1mm DC-Jack and a 5566-04A connector
  • The output current of the 12V to 5V DC/DC regulator is up to 8A
  • One PowerKey button and PowerKey jumper
• USB
  • Two 4-PIN PH2.0 USB 2.0 host connectors.
• Heat dissipation
  • Two PCB nuts for mounting a heatsink above the PCIe to SATA brigde
  • One 2-PIN PH2.0 connector for fan. The 12V output is modulated by PWM1
• GPIO
  • ALL the signals of the NanoPi M4's 40-PIN connector are populated
• About Power Supply
  • To drive one or two hard disk, We recommend our 12V 2A Universal Power Adapter https://www.friendlyarm.com/index.php?route=product/product&path=73&product_id=233
  • To drive four hard disk, We recommend PC Power

Overview

Front

Back