Matrix - CAM500A

查看中文

1 Introduction

CAM500A

The CAM500A module uses Omni Vision’s QSXGA CMOS OV5640 module. It has DVP parallel output interface and supports up to 2592 x 1944 photographing and 720P@30fps video recording. It has automatic image control functions: AFC, AWB and AEC etc.

The CAM500A uses a cell phone camera. This camera’s focal length is 2.7mm. Its aperture is 2.8. Its viewing angle is 66 degree.

2 Features

• 5MP (2592 x 1944) photographing, 720P@30fps video recording
• Focal length: 2.7mm, Aperture: 2.8, Viewing angle: 66 degree
• Automatic image control functions: AFC, AWB and AEC etc
• 24 PIN FPC interface including DVC parallel output, 3.3V power, I2C and GPIO

3 Connect CAM500A to ARM Board

3.1 Connect CAM500A to Tiny4412

• Tiny4412 works with CAM500A

4 Resources

• Datasheet
• Android APK for Tiny4412
• OV5640 schematics

An open source APP developed by FriendlyElec for CAM500A/CAM500B (supports preview, picture-taking and video recording)

• [APP source code: https://github.com/friendlyarm/android_CameraDemo]
• [Source code for NanoPi 2:https://github.com/friendlyarm]

5 Update Log

5.1 Dec-27-2016

• Released English Version