Matrix - Compact Kit
From FriendlyELEC WiKi
Contents
1 Introduction
- The Matrix-Compact Kit is a compact board with various hardware resources, interfaces and ports. It includes user keys, LED, buzzer, ADC, compass, temperature sensor, IR receiver, TFT port and etc. This board can be connected to the NanoPi, NanoPi 2 and Raspberry Pi via its 40 pin header. In addition you can connect other external modules to its GPIOs.
2 Features
Matrix - Compact Kit has the following onboard resources:
- 0.9 TFT LCD
- 3 x tact switch
- 4 x 5mm LED
- Buzzer
- ADC
- Potentiometer
- 40 pin female connector
- 4 pin header - I2C interface
- 4 pin header - UART interface
- 3 pin double row pin-header - 3.3V and GND
- DS18B20 temperature sensor
- IR receiver
- 10 x 3 pin header - 3 x AIO, 7 x DIO (two of them can be configured to PWM and four of them can be configured to SPI)
- Compass
3 Dimensional Diagram and Pin Description
- PCB Dimension (mm):
- 40 pin female connector's pin description
Pin# Name Pin# Name 1 VDD_SYS_3.3V 2 VDD_5V 3 I2C0_SDA 4 VDD_5V 5 I2C0_SCL 6 DGND 7 GPIOB28 8 UART3_TXD 9 DGND 10 UART3_RXD 11 GPIOB29 12 GPIOB26 13 GPIOB30 14 DGND 15 GPIOB31 16 PWM2 17 VDD_SYS_3.3V 18 GPIOB27 19 SPI0_MOSI 20 DGND 21 SPI0_MISO 22 PWM0 23 SPI0_CLK 24 SPI0_CS 25 DGND 26 PWM1 27 I2C1_SDA 28 I2C1_SCL 29 GPIOC8 30 DGND 31 SPI2_CLK 32 GPIOC28 33 SPI2_CS 34 DGND 35 SPI2_MOSI 36 GPIOC7 37 SPI2_MISO 38 ALIVEGPIO2 39 DGND 40 ALIVEGPIO3
- 30 pin header's pin description
Ch# G Ch# V Ch# S 1 GND 2 VDD_5V 3 A1_PCF 4 GND 5 VDD_5V 6 A2_PCF 7 GND 8 VDD_5V 9 A3_PCF 10 GND 11 VDD_5V 12 D1_Pi11 13 GND 14 VDD_5V 15 D2_Pi26 16 GND 17 VDD_5V 18 D3_Pi16 19 GND 20 VDD_5V 21 D4_Pi19 22 GND 23 VDD_5V 24 D5_Pi21 25 GND 26 VDD_5V 27 D6_Pi23 28 GND 29 VDD_5V 30 D7_Pi24
- DS18B20 and IR receiver's pin description
Pin# Name Pin# Name Pin# Name 1 VDD_5V 2 DATA 3 GND 1 DATA 2 GND 3 VDD_5V
4 Resources
- [Schematic](Matrix - Compact Kit-Schematic.pdf)
- [Schematic](Matrix - Compact Kit-Schematic.pdf)
- [0.9'LCD datasheet](Matrix - Compact Kit-0.9'LCD datasheet.pdf)
5 Update Log
5.1 Feb-17-2016
- Added 5.9, 5.10 and 5.11
5.2 Feb-24-2016
- Added the driver's source code location in Section 5.2
5.3 Mar-21-2016
- Corrected typo in Section 5.9
- Added lib installation steps in Section 5.11
5.4 Mar-29-2016
- Corrected expression errors