Template:RK3566-BuildFromSource

From FriendlyELEC WiKi
Revision as of 08:02, 26 August 2024 by Tzs (Talk | contribs) (updated by API)

Jump to: navigation, search

1 Build Openwrt/Friendlywrt

1.1 Download Code

Two versions are available, please choose as required:

1.1.1 FriendlyWrt 21.02
mkdir friendlywrt21-rk3566
cd friendlywrt21-rk3566
git clone https://github.com/friendlyarm/repo --depth 1 tools
tools/repo init -u https://github.com/friendlyarm/friendlywrt_manifests -b master-v21.02 \
        -m rk3566.xml --repo-url=https://github.com/friendlyarm/repo  --no-clone-bundle
tools/repo sync -c  --no-clone-bundle
1.1.2 FriendlyWrt 23.05
mkdir friendlywrt23-rk3566
cd friendlywrt23-rk3566
git clone https://github.com/friendlyarm/repo --depth 1 tools
tools/repo init -u https://github.com/friendlyarm/friendlywrt_manifests -b master-v23.05 \
        -m rk3566.xml --repo-url=https://github.com/friendlyarm/repo  --no-clone-bundle
tools/repo sync -c  --no-clone-bundle

1.2 First compilation step

./build.sh rk3566.mk  # or rk3566-docker.mk

All the components (including u-boot, kernel, and friendlywrt) are compiled and the sd card image will be generated, then execute the following command to generate the image file for installing the system into the emmc: 

./build.sh emmc-img

After making changes to the project, the sd card image needs to be repackaged by running the following command: 

./build.sh sd-img

1.3 Secondary compilation steps

cd friendlywrt
make menuconfig
rm -rf ./tmp
make -j${nproc}
cd ../
./build.sh sd-img
./build.sh emmc-img

1.4 Build u-boot only

./build.sh uboot

1.5 Build kernel only

./build.sh kernel

1.6 Build friendlywrt only

./build.sh friendlywrt

Or go to the friendlywrt directory and follow the standard openwrt commands. If you get an error with the above command, try using the following command to compile in a single thread: 

cd friendlywrt
make -j1 V=s

2 Build Other Linux

2.1 Kernel and u-boot versions

Operating System Kernel Version U-boot version Cross-compiler Partition type Packaging Tool Kernel branch Kernel configuration U-boot branch U-boot configuration
openmediavault-arm64 linux v6.1.y u-boot
v2017.09 		11.3-aarch64 GPT
sd-fuse 		nanopi6-v6.1.y nanopi5_linux_defconfig nanopi5-v2017.09 nanopi5_defconfig
ubuntu-noble-core-arm64 GPT
debian-bookworm-core-arm64
friendlywrt21 nanopi5_linux_defconfig
+friendlywrt.config
friendlywrt21-docker
friendlywrt23
friendlywrt23-docker

2.2 Build kernel linux-v6.1.y

This section applies to the following operating systems:

friendlywrt21 friendlywrt21-docker friendlywrt23 friendlywrt23-docker ubuntu-noble-core-arm64 openmediavault-arm64 debian-bookworm-core-arm64

Clone the repository to your local drive then build: 

git clone https://github.com/friendlyarm/kernel-rockchip --single-branch --depth 1 -b nanopi6-v6.1.y kernel-rockchip
cd kernel-rockchip
export PATH=/opt/FriendlyARM/toolchain/11.3-aarch64/bin/:$PATH
touch .scmversion
# Configuring the Kernel
# Load default configuration
make CROSS_COMPILE=aarch64-linux-gnu- ARCH=arm64 nanopi5_linux_defconfig
# Optionally, load configuration for FriendlyWrt
# make CROSS_COMPILE=aarch64-linux-gnu- ARCH=arm64 nanopi5_linux_defconfig friendlywrt.config
# Optionally, if you want to change the default kernel config
# make CROSS_COMPILE=aarch64-linux-gnu- ARCH=arm64 menuconfig
# Start building kernel
make CROSS_COMPILE=aarch64-linux-gnu- ARCH=arm64 -j$(nproc)
# Start building kernel modules
mkdir -p out-modules && rm -rf out-modules/*
make CROSS_COMPILE=aarch64-linux-gnu- ARCH=arm64 INSTALL_MOD_PATH="$PWD/out-modules" modules -j$(nproc)
make CROSS_COMPILE=aarch64-linux-gnu- ARCH=arm64 INSTALL_MOD_PATH="$PWD/out-modules" modules_install
KERNEL_VER=$(make CROSS_COMPILE=aarch64-linux-gnu- ARCH=arm64 kernelrelease)
[ ! -f "$PWD/out-modules/lib/modules/${KERNEL_VER}/modules.dep" ] && depmod -b $PWD/out-modules -E Module.symvers -F System.map -w ${KERNEL_VER}
(cd $PWD/out-modules && find . -name \*.ko | xargs aarch64-linux-strip --strip-unneeded)

Pack the kernel.img and resource.img: 

wget https://raw.githubusercontent.com/friendlyarm/sd-fuse_rk3566/kernel-6.1.y/tools/mkkrnlimg && chmod 755 mkkrnlimg
wget https://raw.githubusercontent.com/friendlyarm/sd-fuse_rk3566/kernel-6.1.y/tools/resource_tool && chmod 755 resource_tool
wget https://raw.githubusercontent.com/friendlyarm/sd-fuse_rk3566/kernel-6.1.y/prebuilt/boot/logo.bmp
wget https://raw.githubusercontent.com/friendlyarm/sd-fuse_rk3566/kernel-6.1.y/prebuilt/boot/logo_kernel.bmp
./mkkrnlimg arch/arm64/boot/Image kernel.img
./resource_tool --dtbname arch/arm64/boot/dts/rockchip/rk3566-nanopi*-rev*.dtb logo.bmp logo_kernel.bmp

After the compilation, the following files will be generated:

kernel.img resource.img The kernel modules are located in the out-modules directory

Run your build:
Please refre to #Running the build

2.3 Build u-boot v2017.09

This section applies to the following operating systems:

friendlywrt21 friendlywrt21-docker friendlywrt23 friendlywrt23-docker ubuntu-noble-core-arm64 openmediavault-arm64 debian-bookworm-core-arm64

Clone the repository to your local drive then build: 

git clone https://github.com/friendlyarm/rkbin --single-branch --depth 1 -b friendlyelec
git clone https://github.com/friendlyarm/uboot-rockchip --single-branch --depth 1 -b nanopi5-v2017.09
export PATH=/opt/FriendlyARM/toolchain/11.3-aarch64/bin/:$PATH
cd uboot-rockchip/
./make.sh nanopi_r3

After the compilation, the following files will be generated:

uboot.img trust.img rk3566_loader_v1.16.250.bin (aka MiniLoaderAll.bin)

Run your build:
Please refre to #Running the build

2.4 Running the build

2.4.1 Install to target board

This section applies to the following operating systems:

friendlywrt21 friendlywrt21-docker friendlywrt23 friendlywrt23-docker ubuntu-noble-core-arm64 openmediavault-arm64 debian-bookworm-core-arm64

RK3566 uses GPT partitions by default, you can use the dd command, but be careful to choose the right output device:

  • The SD/TF Card device node: /dev/mmcblk0
  • The eMMC device node: /dev/mmcblk2

The following is an example of how to update the kernel to eMMC:
Use the 'parted' command to view the partition layout: 

parted /dev/mmcblk2 print

Sample outputs: 

Model: MMC BJTD4R (sd/mmc)
Disk /dev/mmcblk2: 31.3GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
 
Number  Start   End     Size    File system  Name      Flags
 1      8389kB  12.6MB  4194kB               uboot
 2      12.6MB  16.8MB  4194kB               trust
 3      16.8MB  21.0MB  4194kB               misc
 4      21.0MB  25.2MB  4194kB               dtbo
 5      25.2MB  41.9MB  16.8MB               resource
 6      41.9MB  83.9MB  41.9MB               kernel
 7      83.9MB  134MB   50.3MB               boot
 8      134MB   2500MB  2366MB  ext4         rootfs
 9      2500MB  31.3GB  28.8GB  ext4         userdata

as shown above, the resource partition is located at 5 and the kernel partition is located at 6. Use the dd command to write the resource.img and kernel.img files to these partitions, the commands are as follows: 

dd if=resource.img of=/dev/mmcblk2p5 bs=1M
dd if=kernel.img of=/dev/mmcblk2p6 bs=1M

If you want to update u-boot: 

dd if=uboot.img of=/dev/mmcblk2p1 bs=1M

To update new driver modules, copy the newly compiled driver modules to the appropriate directory under /lib/modules.

2.4.2 Packaging and creating an SD image

To create a new OS image file, you need to use the "sd-fuse" packaging tool.

"sd-fuse" is a collection of scripts that can be used to create bootable SD card images for FriendlyElec boards. Its main features include:

  • Creation of root filesystem images from a directory
  • Building of bootable SD card images
  • Simple compilation of kernel, U-Boot, and third-party drivers

Please click on the following link to find out more:

Kernel version Packaging Tool
linux v4.19.y sd-fuse_rk3566/kernel-4.19
linux v6.1.y sd-fuse_rk3566/kernel-6.1.y
2.4.3 USB flashing
2.4.3.1 Linux

Reboot the board and enter loader mode with the following command: 

sudo reboot loader

To flash U-Boot and kernel using the "upgrade_tool_v2.17_for_linux" tool, please use the following command: 

sudo upgrade_tool di -k kernel.img
sudo upgrade_tool di -re resource.img
sudo upgrade_tool di -u uboot.img
sudo upgrade_tool RD

Note: "upgrade_tool" is a command-line tool provided by Rockchip for Linux operating systems (Linux_Upgrade_Tool).

3 Build the code using scripts

3.1 Download scripts and image files

git clone https://github.com/friendlyarm/sd-fuse_rk3566.git -b kernel-4.19
cd sd-fuse_rk3566
wget http://112.124.9.243/dvdfiles/rk3566/images-for-eflasher/ubuntu-noble-core-arm64-images.tgz
tar xvzf ubuntu-noble-core-arm64-images.tgz

3.2 Compile the kernel

Download the kernel source code and compile it. the relevant image files in the ubuntu-noble-core-arm64 directory will be automatically updated, including the kernel modules in the file system: 

git clone https://github.com/friendlyarm/kernel-rockchip --depth 1 -b nanopi4-v4.19.y kernel-rk3566
KERNEL_SRC=$PWD/kernel-rk3566 ./build-kernel.sh ubuntu-noble-core-arm64

3.3 Compile the kernel headers

git clone https://github.com/friendlyarm/kernel-rockchip --depth 1 -b nanopi4-v4.19.y kernel-rk3566
MK_HEADERS_DEB=1 BUILD_THIRD_PARTY_DRIVER=0 KERNEL_SRC=$PWD/kernel-rk3566 ./build-kernel.sh ubuntu-noble-core-arm64

3.4 Compile the uboot

Download the uboot source code and compile it. the relevant image files in the ubuntu-noble-core-arm64 directory will be automatically updated: 

git clone https://github.com/friendlyarm/uboot-rockchip --depth 1 -b nanopi5-v2017.09
UBOOT_SRC=$PWD/uboot-rockchip ./build-uboot.sh ubuntu-noble-core-arm64

3.5 Generate new image

Repackage the image file in the ubuntu-noble-core-arm64 directory into sd card image: 

./mk-sd-image.sh ubuntu-noble-core-arm64

After the command is completed, the image is in the out directory, you can use the dd command to make the SD boot card, for example: 

dd if=out/rk3566-sd-friendlycore-focal-4.19-arm64-YYYYMMDD.img of=/dev/sdX bs=1M
Retrieved from "https://wiki.friendlyelec.com/wiki/index.php?title=Template:RK3566-BuildFromSource&oldid=26251"