SOM-RK3399
From FriendlyELEC WiKi
Contents
1 Introduction
2 Hardware Spec
- SoC: Rockchip RK3399
- CPU: big.LITTLE,Dual-Core Cortex-A72(up to 2.0GHz) + Quad-Core Cortex-A53(up to 1.5GHz)
- GPU: Mali-T864 GPU,supports OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC
- VPU: 4K VP9 and 4K 10bits H265/H264 60fps decoding, Dual VOP, etc
- PMU: RK808-D PMIC, cooperated with independent DC/DC, enabling DVFS, solfware power-down, RTC wake-up, system sleep mode
- RAM: Dual-Channel 2GB DDR3
- Flash: 16GB eMMC 5.1 Flash
- Ethernet: Native Gigabit Ethernet
- Wi-Fi/BT: 802.11a/b/g/n/ac, Bluetooth 4.1, Wi-Fi and Bluetooth combo module, dual antenna interface
- Video Input: one or two 4-Lane MIPI-CSI, dual ISP, up to 13MPix/s,supports simultaneous input of dual camera data
- Video output
- HDMI: HDMI 2.0a, supports 4K@60Hz,HDCP 1.4/2.2
- DP on Type-C: DisplayPort 1.2 Alt Mode on USB Type-C
- LCD Interface: one eDP 1.3(4-Lane,10.8Gbps), one or two 4-Lane MIPI-DSI
- USB
- USB 2.0: 2 independent native USB 2.0 Host
- USB 3.0: 1 native USB 3.0 Host
- USB Type-C: Supports USB3.0 Type-C and DisplayPort 1.2 Alt Mode on USB Type-C
- PCIe: PCIe x4, compatible with PCIe 2.1, Dual operation mode;
- SDIO/MMC: 1x SDIO/MMC for SD Card
- GPIOs, I2S, I2C, PWM, UART, SPI, ADCs
- 2 X 1.8V I2C, 1 x 3V I2C
- 1 x 3V UART/SPI
- 2 x PWM
- 1 x IR-RX
- 1 x SPDIF_TX
- 1 x 1.8V I2S,
- 6 x 1.8V GPIOs, 8 x 3V GPIOs
- ADC: 3 x 1.8V ADC inputs
- Debug: one Debug UART, 3V level, 1500000bps
- Keys: PowerKey, Reset, Recovery
- LED: 1 x power LED and 1 x GPIO Controlled LED
- Power supply: DC 5V~20V
- PCB: 8 Layer, 50 mm x 69.6 mm, 260 Pin edge connector
- Ambient Operating Temperature: -20℃ to 70℃
3 Software Features
4 Diagram, Layout and Dimension
4.1 Layout
- 260 Pin Spec
- Socket Type:0.5mm Pitch 260-Pin Standard Type DDR4 SODIMM Socket
Top | Bottom | ||||||||
---|---|---|---|---|---|---|---|---|---|
Pin# | Assignment | Pin Type | If Not Use | Description | Pin# | Assignment | Pin Type | If Not Use | Description |
1 | VCC_IN | Power IN | / | 5V to 20V Power Input | 2 | VCC_IN | Power IN | / | 5V to 20V Power Input |
3 | VCC_IN | Power IN | / | 4 | VCC_IN | Power IN | / | ||
5 | VCC_IN | Power IN | / | 6 | VCC_IN | Power IN | / | ||
7 | VCC_IN | Power IN | / | 8 | VCC_IN | Power IN | / | ||
9 | GND | Power | / | System Ground(0V) | 10 | GND | Power | / | System Ground(0V) |
11 | GND | Power | / | 12 | GND | Power | / | ||
13 | VCC5V0_SYS | Power OUT | float | 5V Power Output,2A max. Auto on when system power on, and off when system power off. | 14 | PWR_KEY | In | float | System Power Key signal, active low, internal pulled up to 3.3V with 10K |
15 | VCC5V0_SYS | Power OUT | float | 16 | VDC_ONOFF | In | float | Power On Mode Select, float for Auto Start,short to GND for PowerKey Mode | |
17 | VCC5V0_SYS | Power OUT | float | 18 | RTC_BATT_IN | Power IN | float | RTC backup battery(3V)input,backup current is 25uA | |
19 | VCC5V0_SYS | Power OUT | float | 20 | RECOVERY | In | float | System RECOVERY Key signal,acticve low | |
21 | VCC3V3_SYS | Power OUT | float | 3.3V Power Output,1A max. Auto on when system power on, and off when system power off. | 22 | RESET_IN_H | In | float | RESET signal, acticve hight |
23 | VCC3V3_SYS | Power OUT | float | 24 | GND | Power | / | System Ground(0V) | |
25 | VCC3V3_SYS | Power OUT | float | 26 | ADC_IN0 | In | float | 0V to 1.8V inputs of RK3399 SoC ADC | |
27 | VCC3V3_SYS | Power OUT | float | 28 | ADC_IN2 | In | float | ||
29 | VCC_1V8 | Power OUT | float | 1.8V Power Output,200mA max. Auto on when system power on, and off when system power off. | 30 | ADC_IN3 | In | float | |
31 | VCC_1V8 | Power OUT | float | 32 | GND | Power | / | System Ground(0V) | |
33 | VCC3V3_S3 | Power OUT | float | 3.3V Power Output,100mA max. Auto on when system power on, and off when system sleep or power off. | 34 | GPIO1_A0 | In/Out | float | 3V GPIOs of RK3399 SoC. Linux GPIO 32 |
35 | GND | Power | / | System Ground(0V) | 36 | GPIO1_A1 | In/Out | float | 3V GPIO of RK3399 SoC. Linux GPIO 33 |
37 | GPIO0_A2 | In/Out | float | 1.8V GPIO of RK3399 SoC. Linux GPIO 2 | 38 | GPIO1_A3 | In/Out | float | 3V GPIO of RK3399 SoC. Linux GPIO 35 |
39 | GPIO2_A2 | In/Out | float | 1.8V GPIO of RK3399 SoC. Linux GPIO 2 | 40 | GPIO1_A4 | In/Out | float | 3V GPIO of RK3399 SoC. Linux GPIO 36 |
41 | GPIO2_A3 | In/Out | float | 1.8V GPIO of RK3399 SoC. Linux GPIO 67 | 42 | GPIO1_C2 | In/Out | float | 3V GPIO of RK3399 SoC. Linux GPIO 50 |
43 | GPIO2_A4 | In/Out | float | 1.8V GPIO of RK3399 SoC. Linux GPIO 68 | 44 | GPIO1_C6 | In/Out | float | 3V GPIO of RK3399 SoC. Linux GPIO 54 |
45 | GPIO2_A5 | In/Out | float | 1.8V GPIO of RK3399 SoC. Linux GPIO 69 | 46 | GPIO1_C7 | In/Out | float | 3V GPIO of RK3399 SoC. Linux GPIO 55 |
47 | GPIO2_A6 | In/Out | float | 1.8V GPIO of RK3399 SoC. Linux GPIO 70 | 48 | GPIO1_D0 | In/Out | float | 3V GPIO of RK3399 SoC. Linux GPIO 56 |
49 | IR_RX | In | float | Infrared Receiver input, 1.8V level | |||||
51 | GND | Power | / | System Ground(0V) | |||||
53 | I2C1_SCL | Out | float | I2C1 clock, 1.8V level, open drian with 2.2K pulled internal | |||||
55 | I2C1_SDA | In/Out | float | I2C1 data, 1.8V level, open drian with 2.2K pulled internal | |||||
57 | I2C2_SDA | In/Out | float | I2C2 data, 1.8V level, open drian with 2.2K pulled internal | |||||
59 | I2C2_SCL | Out | float | I2C2 clock, 1.8V level, open drian with 2.2K pulled internal | |||||
61 | I2C7_SCL_HDMI | Out | float | I2C7 clock, 1.8V level, for HDMI EDID CLK, open drian with 2.2K pulled internal | |||||
63 | I2C7_SDA_HDMI | In/Out | float | I2C7 data, 1.8V level, for HDMI EDID DATA, open drian with 2.2K pulled internal | |||||
65 | GND | Power | / | ||||||
4.2 Board Dimension
4.3 Carrier Board
5 Link to Rockchip Resources
- Link to Rockchip's resources: https://gitlab.com/friendlyelec/rk3399-nougat/tree/nanopc-t4-nougat/RKDocs
- RK3399 datasheet V1.6
- RK3399TRM V1.4
6 Schematic, PCB CAD File
- Schematic: SOM-RK3399_1904_Schematic.pdf
- PCB CAD File:SOM-RK3399_1904_dxf.zip