NanoPi M4 SATA HAT
From FriendlyELEC WiKi
Features
- SATA
- Use Marvell 88SE9215 Four-Port 6 Gbps SATA I/O Controller
- Four Sata Ports. It supports three communication rates: 6 Gbps, 3 Gbps, and 1.5 Gbps
- One 4-Pin power connector. It includes a 12V and a 5V outputs and is able to carry large currents
- Four LEDs for indicating the status of each sata port
- Power
- Two 12V Power Input options. It includes a 5.5*2.1mm DC-Jack and a 5566-04A connector
- The output current of the 12V to 5V DC/DC regulator is up to 8A
- One PowerKey button and PowerKey jumper
- USB
- Two 4-PIN PH2.0 USB 2.0 host connectors.
- Heat dissipation
- Two PCB nuts for mounting a heatsink above the PCIe to SATA brigde
- One 2-PIN PH2.0 connector for fan. The 12V output is modulated by PWM1
- GPIO
- ALL the signals of the NanoPi M4's 40-PIN connector are populated
- 'Power Supply
- If connect one or two hard disk, We recommend our 12V 2A Universal Power Adapter https://www.friendlyarm.com/index.php?route=product/product&path=73&product_id=233
