Difference between revisions of "Template:How to Initialize and Format New SSD And HDD"
(updated by API) |
(updated by API) |
||
Line 1: | Line 1: | ||
− | =Connect NVME SSD High Speed Hard Disk= | + | ==Connect NVME SSD High Speed Hard Disk== |
− | ==Detection of SSD== | + | ===Detection of SSD=== |
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
root@FriendlyELEC:~# cat /proc/partitions | root@FriendlyELEC:~# cat /proc/partitions | ||
Line 9: | Line 9: | ||
If there is a nvme0n1 device node it means an SSD is recognized. | If there is a nvme0n1 device node it means an SSD is recognized. | ||
− | ==Partition of SSD== | + | ===Partition of SSD=== |
To mount an SSD under Linux we re-partition it as one section by running the following command: | To mount an SSD under Linux we re-partition it as one section by running the following command: | ||
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
Line 16: | Line 16: | ||
If you want to re-partition it to multiple sections you can run "fdisk /dev/nvme0n1". For more detail about this command refer to the fdisk's manual. | If you want to re-partition it to multiple sections you can run "fdisk /dev/nvme0n1". For more detail about this command refer to the fdisk's manual. | ||
− | ==Format Section to EXT4== | + | ===Format Section to EXT4=== |
After an SSD is successfully partitioned you can check its sections by running "cat /proc/partitions". The /dev/nvme0n1p1 section is used to store data: | After an SSD is successfully partitioned you can check its sections by running "cat /proc/partitions". The /dev/nvme0n1p1 section is used to store data: | ||
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
Line 32: | Line 32: | ||
</syntaxhighlight> | </syntaxhighlight> | ||
− | ==Auto Mount SSD on System Startup== | + | ===Auto Mount SSD on System Startup=== |
Before we mount an SSD's section you need to know its Block ID. You can check it by running "blkid": | Before we mount an SSD's section you need to know its Block ID. You can check it by running "blkid": | ||
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> |
Latest revision as of 03:26, 14 June 2022
Contents
1 Connect NVME SSD High Speed Hard Disk
1.1 Detection of SSD
root@FriendlyELEC:~# cat /proc/partitions major minor #blocks name 1 0 4096 ram0 259 0 125034840 nvme0n1
If there is a nvme0n1 device node it means an SSD is recognized.
1.2 Partition of SSD
To mount an SSD under Linux we re-partition it as one section by running the following command:
(echo g; echo n; echo p; echo 1; echo ""; echo ""; echo w; echo q) | fdisk /dev/nvme0n1
If you want to re-partition it to multiple sections you can run "fdisk /dev/nvme0n1". For more detail about this command refer to the fdisk's manual.
1.3 Format Section to EXT4
After an SSD is successfully partitioned you can check its sections by running "cat /proc/partitions". The /dev/nvme0n1p1 section is used to store data:
root@FriendlyELEC:~# cat /proc/partitions major minor #blocks name 1 0 4096 ram0 259 0 125034840 nvme0n1 259 2 125033816 nvme0n1p1
The following command formats a section to ext4:
mkfs.ext4 /dev/nvme0n1p1
1.4 Auto Mount SSD on System Startup
Before we mount an SSD's section you need to know its Block ID. You can check it by running "blkid":
blkid /dev/nvme0n1p1 /dev/nvme0n1p1: UUID="d15c4bbf-a6c3-486f-8f81-35a8dbd46057" TYPE="ext4" PARTUUID="887628f0-01"
Add a "Block ID" to "/etc/fstab" and here is what it looks like
UUID=<Block ID> /media/nvme ext4 defaults 0 0
You need to replace <Block ID> with the UUID obtained by running "blkid". To mount the SSD in our example we made the "/etc/fstab" file as follows:
UUID=d15c4bbf-a6c3-486f-8f81-35a8dbd46057 /media/nvme ext4 defaults 0 0
We want to mount an SSD to "/media/nvme" but this directory doesn't exist. Therefore we create it and change its access right by running the following commands:
mkdir -p /media/nvme chmod 777 /media/nvme
Run "mount" to check if the SSD is mounted successfully:
mount /media/nvme
You can reboot your board to check if your SSD will be automatically mounted:
reboot